Important compatibility info
| Material | Rubber/Metal | 
| Bearing/Mounting Type | Hydro Mount | 
| Function | Mounting, engine | 
| Placement on Vehicle | Right | 
| Replaces | 43708 | 
| Type | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle | 
| Outer diameter | 275 mm | 
| Thickness | 98.5 mm | 
| Brake Disc Thickness | 30 mm | 
| Minimum thickness | 28 mm | 
| Bolt Hole Circle Diameter | 180 mm | 
| Centering Diameter | 156 mm | 
| Surface | Coated | 
| Function | Brake Disc | 
| Rim Hole Number | 5 -Hole | 
| Type | Brake Disc Rotor | 
| Rotor Style | Internally Vented | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V | 
| Number of Ribs | 1 | 
| Pulleys | with belt pulley | 
| Alternator Charge Current | 70 A | 
| Belt Pulley Diameter | 83 mm | 
| Current Strength | 70 A | 
| Type | Alternator | 
| Function | Alternator | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing Type | with housing | 
| Number of Connectors / Ports | 4 | 
| Resistor Type | Hot-wire Sensor | 
| Function | Mass Air Flow Sensor | 
| Type | Mass Air Flow Sensor | 
| Additional Information | with gasket/seal | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Multi-circuit Protection Valve | 
| Type | Multi-circuit Protection Valve | 
| Internal Thread Size | M16 x 1,5, M22 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 8 | 
| Type | Relay, glow plug system | 
| Function | Relay, glow plug system | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 865 mm | 
| Rod/Strut | Push Rod | 
| Cone Size | 30 mm | 
| Pipe Diameter | 50 mm | 
| Function | Centre Rod Assembly | 
| Internal Thread Size | M30 x 1,5 | 
| External Thread Size | M24 x 1,5 | 
| Extra Description | ProKit | 
| Type | Centre Rod Assembly | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Aluminium | 
| Number of grooves | 8 | 
| Number of Wings | 5 | 
| Function | Water Pump, engine cooling | 
| Water pump impeller material | Grey Cast Iron | 
| Seal Material | Rubber/Metal | 
| Type | Water Pump, engine cooling | 
| Additional Information | with gaskets/seals | 
| Pulleys | with belt pulley | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 80 mm | 
| Operating Mode | Automatic | 
| Housing material | Aluminium | 
| Function | Belt Tensioner, v-ribbed belt | 
| Track rollers material | Plastic | 
| Type | Belt Tensioner, v-ribbed belt | 
| Width of castor bearing surface | 32 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing Colour | black | 
| Function | Ignition Coil | 
| Number of Connectors / Ports | 2 | 
| Type | Ignition Coil | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Requires special tools for mounting | 
| Chain Type | Duplex, with chain lock | 
| Number of Chain Links | 194 | 
| Timing Chain Size | D67HP | 
| Type | Timing Chain | 
| Function | Timing Chain | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, kingpin | 
| Outer diameter | 28 mm. 35 mm | 
| Length | 178 mm | 
| Extra Description | ProKit | 
| Type | Repair Kit, kingpin | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Push Rod | 
| Mounting points diameter | 19 mm | 
| Function | Control/Trailing Arm, wheel suspension | 
| Steering arm type | Trailing Arm | 
| Outer diameter | 48 mm | 
| Length | 573 mm | 
| Placement on Vehicle | Rear Axle Left, Lower, Front Axle, Rear Axle Right | 
| Hole Spacing | 130 mm | 
| Type | Control/Trailing Arm, wheel suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right | 
| Length | 263.9 mm | 
| Width | 147.2 mm | 
| Thickness | 124 mm | 
| Paired article numbers | 27576 | 
| Function | Bush, parabolic spring | 
| Type | Bush, parabolic spring | 
| Hole Spacing | 178.9 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left | 
| Length | 263.9 mm | 
| Width | 147.2 mm | 
| Thickness | 124 mm | 
| Paired article numbers | 27575 | 
| Function | Bush, parabolic spring | 
| Hole Spacing | 178.9 mm | 
| Type | Bush, parabolic spring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 | 
| Opening Temperature | 83 °C | 
| Function | Thermostat, coolant | 
| Type | Thermostat, coolant | 
| Additional Information | with gasket/seal | 
| Additional Information 2 | with Temperature Switch | 
| Housing Type | with housing | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 39944 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Steering arm type | Control Arm | 
| Material | Sheet Steel | 
| Placement on Vehicle | Front Axle Left, Lower | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information | with holder | 
| Additional Information 2 | with ball joint, with bearing | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower | 
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 39943 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information | with holder | 
| Additional Information 2 | with ball joint, with bearing | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Manual | 
| Number of Connectors / Ports | 2 | 
| Function | Tilt Pump, driver cab | 
| Pressure side external thread size | M12 x 1,5 | 
| Suction side external thread size | M12 x 1,5 | 
| Type | Tilt Pump, driver cab | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 10 | 
| Type | Clutch Disc | 
| Function | Clutch Disc | 
| Outer diameter | 380 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















