Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front and Rear |
| Outer diameter | 151 mm |
| Thickness | 39 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Weight | 0.995 kg |
| Type | Joint, propshaft |
| Extra Description | Powerline |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 871 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Weight | 7.05 kg |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 2.57 kg |
| Placement on Vehicle | Rear Axle |
| Width | 40 mm |
| Outer diameter | 228 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 10.6 kg |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Number of Wings | 12 |
| Material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 542 200 19 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Function | Clutch Release Bearing |
| Weight | 2.592 kg |
| Type | Clutch Release Bearing |
| for OE number | 50 00 677 276 |
| Additional Information 2 | with mounting kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Weight | 4.23 kg |
| for OE number | 005 151 66 01 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 99 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| Bolt Hole Circle Diameter | 86 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 30 |
| Weight | 5.778 kg |
| Number of mounting bores | 6 |
| Min. Length | 626 mm |
| ABS Ring Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 0.98 kg |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal, with oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 0.9 kg |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 205 mm |
| Inner diameter | 9 mm |
| Number of Ribs | 5 |
| Width | 205 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 0.530 kg |
| Type | Cylinder Head Gasket Set, air compressor |
| Function | Cylinder Head Gasket Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 397 mm |
| Min. Length | 188 mm |
| Pipe Diameter | 94 mm. 51 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Weight | 4.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Weight | 0.605 kg |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Housing material | Aluminium |
| Operating Mode | Automatic |
| Outer diameter | 65 mm |
| Width of castor bearing surface | 36 mm |
| Weight | 1.890 kg |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 51.95800.7396 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 0.87 kg |
| Width of castor bearing surface | 26 mm |
| Outer diameter | 75 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 059 145 201 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Weight | 1.1 kg |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Additional Information | with gasket/seal |
| Seal Material | Rubber/Metal |
| Operating Mode | pneumatic |
| Water pump impeller material | Metal |
| Type | Water Pump, engine cooling |
| Weight | 1.349 kg |
| Number of grooves | 7 |
| Additional Information 2 | switchable water pump |
| Material | Cast Aluminium |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Material | Plastic |
| Function | Auxiliary water pump (cooling water circuit) |
| Weight | 0.29 kg |
| Type | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| for OE number | 221 835 00 64 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Width | 29 mm |
| Outer diameter | 156 mm |
| Inner diameter | 25 mm |
| Weight | 1.306 kg |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Centering Diameter | 185 mm |
| Thickness | 129 mm |
| Brake Disc Thickness | 32 mm |
| Brake Disc Type | Internally Vented |
| Weight | 18.7 kg |
| Surface | Coated |
| Minimum thickness | 29 mm |
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 6 -Hole |
| Outer diameter | 330 mm |
| Bolt Hole Circle Diameter | 245 mm |
| Additional Information 2 | with ABS sensor ring |
| Function | Brake Disc |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Lock System | with double sealing |
| Operating Mode | Electric |
| Number of Connectors / Ports | 10 |
| Paired article numbers | 178836 |
| Additional Information | with adjuster |
| Placement on Vehicle | Left Rear |
| Extra Description | febi Plus |
| Function | Door Lock |
| Type | Door Lock |
| Weight | 0.603 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.88
Important compatibility info
| Voltage | 12 V |
| Rated Power | 2 kW |
| Number of Teeth | 11 |
| Function | Starter |
| Type | Starter |
| Weight | 5.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.88
Important compatibility info
| Weight | 10.08 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 316 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.91
Important compatibility info
| Weight | 1.9 kg |
| Placement on Vehicle | Right, Upper |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.92
Important compatibility info
| Placement on Vehicle | Right Front, Lower |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.819 kg |
| Type | Mounting, engine |
| Paired article numbers | 182740 |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.92
Important compatibility info
| Extra Description | Basic Short Kit |
| Weight | 0.773 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 170 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 06H 109 158 J S2 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45956)
- 1x Febi Tensioner, timing chain (49551)
- 1x Febi Guide, timing chain (102437)
- 1x Febi Guide, timing chain (102194)
- 1x Febi Guide, timing chain (102427)
£95.93
Important compatibility info
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Width | 25 mm |
| Number of Teeth | 145 |
| Weight | 0.947 kg |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Tensioner Pulley, timing belt (47604)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (103622)
£95.97
Important compatibility info
| for OE number | 74 20 981 966 |
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| Weight | 0.69 kg |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.98
Important compatibility info
| Length | 524 mm |
| Height | 56 mm |
| Width | 344 mm |
| Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
| Additional Information 2 | with bolts/screws |
| Filter type | Screen Filter |
| Transmission Type | Automatic Transmission |
| Weight | 1.15 kg |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.05
Important compatibility info
| Length | 222 mm |
| Width | 44 mm |
| Outer diameter | 73 mm |
| Thickness | 140 mm |
| Inner diameter | 47 mm |
| Function | Suspension, propshaft |
| Weight | 1.045 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.06
Important compatibility info
| Weight | 1.172 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 755 mm |
| Inner length 2 | 715 mm |
| Outer length 1 | 1083 mm |
| Outer length 2 | 987 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.07
Important compatibility info
| Mounting points diameter | 20 mm |
| Pipe Diameter | 45 mm |
| Max. Length | 373 mm |
| Weight | 4.7 kg |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Min. Length | 430 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.07
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 44.7 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Weight | 10.28 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.08
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 137 |
| for OE number | 028 198 119 C S2 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Weight | 2.07 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (01287)
- 1x Febi Timing Belt Kit (14626)
£96.11
Important compatibility info
| Number of Teeth | 136 |
| Weight | 2.01 kg |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11222)
- 1x Febi Water Pump, engine cooling (24185)
£96.11
Important compatibility info
| Additional Information | with drive rods |
| Weight | 0.610 kg |
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pump (34722)
- 1x Febi Drive Shaft, oil pump (34785)
- 1x Febi Drive Shaft, oil pump (34786)
£96.13
Important compatibility info
| Weight | 5.0601 kg |
| Internal Thread Size | M16 x 1,5, M18 x 1,5 |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 960 241 77 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.18
Important compatibility info
| Weight | 12.8 kg |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 629 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.19
Important compatibility info
| Capacity | 60 l |
| Operating Pressure | 12.5 bar |
| Function | Air Tank, compressed-air system |
| Length | 893 mm |
| Material | Steel |
| Outer diameter | 310 mm |
| Weight | 16.2 kg |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.19
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Length | 980 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 10.910 kg |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Brake Type | Drum Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.27
Important compatibility info
| Weight | 10.594 kg |
| Rotor Style | perforated/vented |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Thickness | 64.5 mm |
| Brake Disc Thickness | 32 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 322 mm |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Minimum thickness | 30 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.29
Important compatibility info
| for OE number | 967 241 10 13 |
| Placement on Vehicle | Rear, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 2.500 kg |
| Type | Mounting, engine |
| Replaces | 108061 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.31
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 10.43 kg |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Minimum thickness | 26.4 mm |
| Brake Disc Thickness | 28 mm |
| Thickness | 49.1 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 321 mm |
| Type | Brake Disc Rotor |
| for OE number | 51712-2B700 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.32
Important compatibility info
| Machining | High-carbon |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Placement on Vehicle | Front Axle |
| Outer diameter | 315 mm |
| Thickness | 76 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Weight | 9.14 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.34
Important compatibility info
| Inner diameter | 20 mm |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Pulleys | with belt pulley |
| Number of mounting bores | 4 |
| Weight | 3.496 kg |
| Mounting points diameter | 9 mm |
| for OE number | 1 721 917 |
| Type | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.34
Important compatibility info
| Weight | 4.0 kg |
| Rod/Strut | Coupling Rod |
| Steering arm type | Trailing Arm |
| Placement on Vehicle | Upper Front Axle, both sides |
| Length | 330 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 36 mm |
| Cone Size | 36 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.36
Important compatibility info
| Weight | 2.415 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.39
Important compatibility info
| Min. Length | 629 mm |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 84 mm |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 27 |
| Weight | 6.046 kg |
| Type | Drive Shaft |
| Transmission-side joint diameter | 80.4 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.46
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.6 kg |
| Placement on Vehicle | Right |
| for OE number | 3Q0 199 262 M |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.48
Important compatibility info
| Weight | 13.400 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 286 mm. 260 mm |
| Thickness | 420 mm. 178 mm |
| Function | Bellow, air suspension |
| External Thread Size | M14 x 1,5, M10 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.53
Important compatibility info
| Weight | 0.9 kg |
| Type | Stub Shaft, differential |
| Function | Stub Shaft, differential |
| Additional Information 2 | with screw |
| Placement on Vehicle | transmission sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stub Shaft, differential (39890)
- 1x Febi Screw (45930)
£96.53
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023