Proud to be a UK-based company
Contact us
Important compatibility info
| Housing Type | with housing |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.RL |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.17
Important compatibility info
| Placement on Vehicle | Front and Rear, Left |
| Length | 266 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188116 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 230 mm |
| Brake Shaft Cam | Z-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.17
Important compatibility info
| Placement on Vehicle | Front and Rear, Right |
| Length | 266 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188115 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 230 mm |
| Brake Shaft Cam | Z-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.17
Important compatibility info
| Width | 168 mm |
| Outer diameter | 168 mm |
| Inner diameter | 13 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.18
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 526 mm |
| Min. Length | 325 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Replaces | 20032 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.23
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 43010 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.30
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left, Front, Lower, Rear Axle Right |
| Additional Information 2 | with bearing |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.30
Important compatibility info
| Steering arm type | Trailing Arm |
| Bore Diameter | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Length | 288 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.32
Important compatibility info
| Function | Multi-circuit Protection Valve |
| Internal Thread Size | 7 x M22 x 1,5, 2 x M12 x 1,5 |
| Type | Multi-circuit Protection Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.37
Important compatibility info
| Core Length | 370 mm |
| Core Width | 179 mm |
| Core Depth | 32 mm |
| Function | Heat Exchanger, interior heating |
| Type | Heat Exchanger, interior heating |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.37
Important compatibility info
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 54 mm |
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.42
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
| for OE number | 403 200 77 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.43
Important compatibility info
| Number of grooves | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Housing material | Grey Cast Iron |
| Seal Material | Rubber |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| for OE number | 58 0193 1312 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.43
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 334 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.49
Important compatibility info
| Number of Connectors / Ports | 4 |
| Inner diameter | 63 mm |
| Housing Type | with housing |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Outer diameter | 70 mm |
| Material | Plastic |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.50
Important compatibility info
| Additional Information | without lever |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 792 mm |
| Inner length 2 | 820 mm |
| Outer length 1 | 1103 mm |
| Outer length 2 | 1040 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.50
Important compatibility info
| Rod/Strut | Push Rod |
| Length | 620 mm |
| Outer diameter | 40 mm |
| Cone Size | 30.2 mm |
| Thread Type | with left-hand thread, with right-hand thread |
| Placement on Vehicle | from 1st to 2nd intermediate steering lever |
| Pipe Diameter | 38 mm |
| Function | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.52
Important compatibility info
| External Thread Size | M16 x 2, M12 x 1,5, M22 x 1,5, M8 x 1,25, M12 x 1,75 |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Outer diameter | 258 mm |
| Thickness | 695 mm. 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.52
Important compatibility info
| Placement on Vehicle | Left |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.54
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 51.06500.6669 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.56
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 50 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.56
Important compatibility info
| Inner diameter | 15 mm |
| Outer diameter | 55 mm |
| Length | 75 mm |
| Type | Repair Kit, steering idler arm |
| Mounting points diameter | 14 mm |
| Additional Information | with counter nut |
| Function | Repair Kit, steering idler arm |
| Internal Thread Size | M6 x 1 |
| External Thread Size | M30 x 3,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.57
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| for OE number | 21810-2W200 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.57
Important compatibility info
| Belts | with trapezoidal tooth profile |
| Width | 23 mm |
| Number of Teeth | 148 |
| Surface | Coated |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Replaces | 40137 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (24186)
- 1x Febi Tensioner Pulley, timing belt (38655)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (30227)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (19292)
- 1x Febi Screw (101433)
- 1x Febi Nut (180605)
£110.60
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with piston |
| Outer diameter | 258 mm. 226 mm |
| Thickness | 157 mm. 475 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.60
Important compatibility info
| Outer diameter | 95 mm |
| Operating Mode | Mechanical |
| Number of Connectors / Ports | 2 |
| Type | Fuel Pump |
| Function | Fuel Pump |
| for OE number | 1797 650 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.63
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 3 |
| Type | Sensor, oil pressure |
| Function | Sensor, oil pressure |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.64
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 181829 |
| Cone Size | 25 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 25 mm |
| Paired article numbers | 181823 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Placement on Vehicle | Right Front, Upper |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.71
Important compatibility info
| Extra Description | Full Kit |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 150 |
| Timing Chain Size | Z46-16 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. The special tool must be used for installation / removal.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48577)
- 1x Febi Tensioner, timing chain (40379)
- 1x Febi Guide, timing chain (36631)
- 1x Febi Guide, timing chain (36632)
- 1x Febi Gear/Sprocket, camshaft (104253)
- 1x Febi Bolt, camshaft gear (46364)
- 1x Febi Shaft Seal, crankshaft (38238)
- 1x Febi Pulley Bolt (32025)
- 12x Febi Screw (172940)
- 1x Febi Screw (172938)
- 2x Febi Screw (173689)
- 1x Febi Screw (173512)
£110.71
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 14523 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.78
Important compatibility info
| Function | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Mounting points diameter | 20 mm |
| Max. Length | 624 mm |
| Min. Length | 394 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M12 x 1,75 |
| Pipe Diameter | 60 mm. 50 mm |
| Shock Absorber Type | Oil Pressure |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.82
Important compatibility info
| Function | Bush, kingpin |
| Extra Description | ProKit |
| Type | Bush, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (38490)
- 1x Febi Ball Joint (28356)
- 1x Febi Mounting, control/trailing arm (44400)
- 2x Febi Mounting, control/trailing arm (26933)
- 1x Febi Screw (44467)
- 1x Febi Screw (44469)
- 2x Febi Nut (44470)
£110.82
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 39 mm |
| Operating Mode | Automatic |
| Number of Ribs | 10 |
| Outer diameter | 78 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.84
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.88
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 338 mm |
| Thickness | 73.2 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.89
Important compatibility info
| Min. Length | 569 mm |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 107.8 mm |
| Number of mounting bores | 6 |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.97
Important compatibility info
| External Thread Size | M8 x 1,25, M22 x 1,5 |
| Placement on Vehicle | non-steered trailing axle |
| Outer diameter | 286 mm |
| Thickness | 262 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.00
Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Number of Teeth | 46 |
| Placement on Vehicle | Intake Side |
| for OE number | 132 034 02 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.00
Important compatibility info
| Additional Information | with nuts, with rubber mounts |
| Paired article numbers | 188595 |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with screw |
| External Thread Size | M16 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Steel |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.00
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with lock nut |
| Material | Aluminium |
| Additional Information 2 | with ball joint, with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 187795 |
| Cone Size | 23.8 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 28.3 mm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.00
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 294 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.02
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 332 mm |
| Thickness | 62.2 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.09
Important compatibility info
| Placement on Vehicle | Driver side |
| Function | Repair Kit, kingpin |
| Extra Description | febi Plus |
| Type | Repair Kit, kingpin |
| Paired article numbers | 198303 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.09
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Rod/Strut | Pull Rod |
| Length | 317 mm |
| Inner diameter | 12 mm |
| Function | Rod/Strut, wheel suspension |
| Type | Rod/Strut, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.11
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M10 x 1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 981 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 93.7 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.11
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Steering arm type | Trailing Arm |
| Bore Diameter | 17 mm |
| Pipe Diameter | 62 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.11
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 789 mm |
| Wheel Sided Joint Diameter | 71.9 mm |
| Transmission-side joint diameter | 72 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.13
Important compatibility info
| Width | 65 mm |
| Outer diameter | 163 mm |
| Additional Information 2 | with screw |
| Inner diameter | 27 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (103641)
- 1x Febi Pulley Bolt (193274)
£111.15
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023