Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.02
Important compatibility info
| Number of Teeth | 46 |
| for OE number | 48 12 907 |
| Placement on Vehicle | Exhaust Side |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.04
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front |
| Additional Information | with lock nut |
| Material | Aluminium |
| Additional Information 2 | with ball joint, with bearing, with screw |
| Steering arm type | Control Arm |
| Paired article numbers | 196744 |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (102429)
- 1x Febi Bolt, control arm (177857)
£99.04
Important compatibility info
| Type | Shock Absorber |
| Pipe Diameter | 63.4 mm. 54 mm |
| Piston conrod diameter | 15 mm |
| Max. Length | 484 mm |
| Min. Length | 303 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.07
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 05022 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.10
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 315 mm |
| Thickness | 84 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16.4 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 94 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.12
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1025 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | adjustable |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.15
Important compatibility info
| Width of castor bearing surface | 34 mm |
| Operating Mode | Automatic |
| Track rollers material | Plastic |
| Function | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Outer diameter | 78 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Width | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.16
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 50.8 mm |
| Outer diameter | 272.2 mm |
| Thickness | 94.1 mm |
| Additional Information 2 | with wheel bearing |
| Inner diameter | 228.3 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 52.1 mm |
| Max.skimmed drum measure | 229.5 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Drum |
| Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.17
Important compatibility info
| Additional Information 2 | with bearing |
| Additional Information | with kingpin |
| Outer diameter | 54 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (15864)
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Seal Ring, steering knuckle (15859)
- 1x Febi Bush, steering knuckle (15860)
£99.19
Important compatibility info
| Type | Dosing Module, urea injection |
| Function | Dosing Module, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.19
Important compatibility info
| Additional Information | with gasket/seal |
| Housing material | Aluminium |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Function | Water Pump, engine cooling |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.21
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 29 |
| Min. Length | 619 mm |
| Wheel Sided Joint Diameter | 95 mm |
| Transmission-side joint diameter | 85 mm |
| Additional Information 2 | with nut |
| Additional Information | with Split Pin |
| External Teeth, Wheel Side | 29 |
| Thread Size | M24x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.24
Important compatibility info
| Width of castor bearing surface | 20 mm |
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 038 903 315 P |
| Type | Belt Tensioner, v-ribbed belt |
| Vibration | with vibration absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.27
Important compatibility info
| Units / Pulleys | incl. tensioner pulley, incl. guide pulley |
| Width | 27 mm |
| Number of Teeth | 126 |
| Function | Timing Belt Kit |
| Additional Information 2 | with screw, with cover |
| Type | Timing Belt Kit |
| for OE number | 13 0C 113 21R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19943)
- 1x Febi Tensioner Pulley, timing belt (19846)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (47799)
- 1x Febi Pulley Bolt (27259)
- 1x Febi Seal Cap, camshaft (23204)
- 1x Febi Seal Cap, camshaft (23205)
£99.30
Important compatibility info
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 183210 |
| Brake caliper piston diameter | 41 mm |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.30
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Paired article numbers | 192762 |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 340 mm |
| Min. Length | 224 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Extra Description | febi Plus |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.30
Important compatibility info
| Thickness | 50 mm |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
| Surface | Coated |
| Centering Diameter | 69 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Minimum thickness | 28 mm |
| Brake Disc Thickness | 30 mm |
| Rotor Style | Internally Vented |
| Outer diameter | 340 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.35
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 82 |
| Surface | Coated |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (43483)
- 1x Febi Tensioner Pulley, timing belt (30221)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
£99.35
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Paired article numbers | 175438 |
| Placement on Vehicle | Exhaust Side |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.38
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023