Proud to be a UK-based company
Contact us
Important compatibility info
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Inner diameter | 32 mm |
| Width | 73 mm |
| Outer diameter | 153 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (171097)
- 1x Febi Centering Bolt, crankshaft pulley (33655)
£96.81
Important compatibility info
| Thread Size | M20x1,5 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 614 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 89.1 mm |
| Transmission-side joint diameter | 81.6 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.4 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Placement on Vehicle | engine sided |
| Length | 417 mm |
| Spanner Size | 22 |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M14 x 1,5 |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Ignition Coil |
| Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 1.6 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Function | Release Fork, clutch |
| for OE number | 1 737 306 |
| Type | Release Fork, clutch |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Length | 110 mm |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 58 80 |
| Width | 95 mm |
| Height | 95 mm |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.82
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Paired article numbers | 181513 |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.84
Important compatibility info
| Length | 186 mm |
| Outer diameter | 33 mm |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Lower |
| Additional Information | with Thrust Bearing |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (08527)
- 2x Febi Bush, steering knuckle (08528)
- 2x Febi Bush, steering knuckle (08529)
- 1x Febi Bush, steering knuckle (04281)
- 2x Febi Lock Ring, steering knuckle (08532)
- 2x Febi Seal Ring, steering knuckle (08534)
- 2x Febi Seal Ring, steering knuckle (08533)
- 2x Febi Circlip, kingpin (02668)
- 1x Febi Kingpin (01432)
- 1x Febi Springwasher (07583)
- 1x Febi Nut (01030)
£96.88
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 65 A |
| Belt Pulley Diameter | 54 mm |
| Current Strength | 65 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.89
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 179452 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.92
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 179451 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.92
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.93
Important compatibility info
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 155 mm. 220 mm |
| Thickness | 260 mm. 154 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.00
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 82 00 902 955 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.00
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Width | 30 mm |
| Number of Teeth | 120 |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21724)
- 1x Febi Water Pump, engine cooling (21186)
£97.15
Important compatibility info
| Min. Length | 562 mm |
| Additional Information 2 | with screw |
| External Teeth, Wheel Side | 37 |
| External Teeth, Diff.Side | 27 |
| Wheel Sided Joint Diameter | 89 mm |
| Thread Size | M16x1,5 |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 82.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.16
Important compatibility info
| Type | Accelerator Pedal |
| Function | Accelerator Pedal |
| Operating Mode | Electronic |
| Number of Connectors / Ports | 6 |
| Number of mounting bores | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.19
Important compatibility info
| Rotor Style | perforated/vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 46.6 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.20
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023