Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1025 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | adjustable |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.14
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Paired article numbers | 181902 |
| External Teeth, Wheel Side | 29 |
| External Teeth, Diff.Side | 39 |
| Min. Length | 1016 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 91.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.15
Important compatibility info
| Thread Size | M20x1,5 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| External Teeth, Diff.Side | 22 |
| Min. Length | 973 mm |
| ABS Ring Diameter | 86 mm |
| Wheel Sided Joint Diameter | 76.3 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.17
Important compatibility info
| External Thread Size | M8 x 1,25, M22 x 1,5 |
| Placement on Vehicle | non-steered trailing axle |
| Outer diameter | 286 mm |
| Thickness | 262 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.21
Important compatibility info
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Rated Power | 155 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.21
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M28x1,5 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 41 |
| Min. Length | 759 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.22
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 37 |
| Min. Length | 951 mm |
| Wheel Sided Joint Diameter | 91.7 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.22
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 132 |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.23
Important compatibility info
| Function | Oil Pump |
| for OE number | 646 180 16 01 |
| Type | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.23
Important compatibility info
| Thickness | 50 mm |
| Inner diameter | 13 mm |
| Number of Ribs | 8 |
| Outer diameter 1 | 145 mm |
| Outer diameter 2 | 167 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK + 4PK |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.25
Important compatibility info
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.25
Important compatibility info
| Width of castor bearing surface | 24 mm |
| Width | 70 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.26
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.27
Important compatibility info
| Paired article numbers | 178322 |
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side, Right |
| Number of Teeth | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.27
Important compatibility info
| Function | Bellow, air suspension |
| Thickness | 530 mm. 160 mm |
| Outer diameter | 227 mm. 170 mm |
| Placement on Vehicle | non-steered leading axle, non-steered trailing axle |
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.28
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 324 mm |
| Thickness | 52 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.28
Important compatibility info
| Type | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 90 |
| Timing Chain Size | G68HING |
| Function | Timing Chain Kit |
| Placement on Vehicle | Lower |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (182266)
- 1x Febi Tensioner, timing chain (182807)
- 1x Febi Guide, timing chain (183264)
- 1x Febi Guide, timing chain (182917)
- 1x Febi Guide, timing chain (183998)
£100.28
Important compatibility info
| Placement on Vehicle | Rear, Lower, Front Axle Left |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint, with rubber mount |
| Steering arm type | Control Arm |
| Paired article numbers | 196151 |
| Cone Size | 23.1 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.28
Important compatibility info
| Height | 150 mm |
| Outer diameter | 95 mm |
| Filter type | with connection for water sensor, In-Line Filter, with filter heating |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Housing material | Metal |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.28
Important compatibility info
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm |
| Bore Diameter | 15 mm. 19 mm |
| Hole Pitch 1/ Hole Pitch 2 | 80/130 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.31
Important compatibility info
| Rolling piston material | Steel |
| Additional Information | with piston |
| Outer diameter | 259 mm. 205 mm |
| Thickness | 143 mm. 295 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| External Thread Size | M12 x 1,75, M16 x 2, M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.33
Important compatibility info
| Function | Air Filter |
| Height | 525 mm |
| Outer diameter | 303 mm |
| Inner diameter | 167 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| for OE number | 1 869 992 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.36
Important compatibility info
| Operating Mode | Mechanical |
| Min. Length | 283 mm |
| Pipe Diameter | 50 mm |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 50 mm. 20 mm |
| Max. Length | 298 mm |
| Placement on Vehicle | Right Front |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.36
Important compatibility info
| Function | Bellow, air suspension |
| Additional Information 2 | with spring cotter |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 286 mm. 226 mm |
| Thickness | 350 mm. 210 mm |
| Rolling piston material | Steel |
| External Thread Size | M16 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.37
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 286 mm. 239 mm |
| Thickness | 192 mm. 483 mm |
| External Thread Size | M22 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.37
Important compatibility info
| Replaces | 44598 |
| Suction side external thread size | M12 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Pressure side external thread size | M14 x 1,5 |
| Function | Tilt Pump, driver cab |
| Type | Tilt Pump, driver cab |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Hole Spacing | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.38
Important compatibility info
| Valve type | Relay Valve |
| Type | Valve, ABS regulation |
| Operating pressure to | 10 bar |
| Function | Valve, ABS regulation |
| Internal Thread Size | M22 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.38
Important compatibility info
| Thickness | 430 mm. 128 mm |
| External Thread Size | M16 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Outer diameter | 228 mm. 197 mm |
| Placement on Vehicle | Rear Axle |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.39
Important compatibility info
| Colour | Black |
| Function | Cylinder Head Cover |
| Material | PA (polyamide), ACM (Polyacrylate) |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Replaces | 102208 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.39
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 36 |
| Min. Length | 782 mm |
| Wheel Sided Joint Diameter | 89.5 mm |
| Transmission-side joint diameter | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.40
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.46
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 840 mm |
| Steering arm type | Trailing Arm, Control Arm |
| Inner diameter 1 | 20 mm |
| Inner diameter 2 | 40 mm |
| Adjustable | Adjustable on one side |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.48
Important compatibility info
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Width | 20 mm |
| Number of Teeth | 163 |
| Surface | Coated |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47885)
- 1x Febi Toothed Belt, power take-off (49236)
- 1x Febi Tensioner Pulley, timing belt (45795)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (45793)
£100.48
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 82 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.49
Important compatibility info
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Bolt Hole Circle Diameter | 120 mm |
| Outer diameter | 325 mm |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 27 mm |
| Brake Disc Thickness | 30 mm |
| Thickness | 70 mm |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.49
Important compatibility info
| Piston conrod diameter | 15 mm |
| Mounting points diameter | 16 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 645 mm |
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top eye |
| Pipe Diameter | 54 mm. 63 mm |
| Min. Length | 461 mm |
| Shock Absorber Type | Oil Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.49
Important compatibility info
| Additional Information | with electric motor |
| Vehicle Equipment | for vehicles with electric parking brake |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179245 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.52
Important compatibility info
| Outer diameter | 86 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 39 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.55
Important compatibility info
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.55
Important compatibility info
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Rotor Style | Solid |
| Centering Diameter | 52.3 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Brake Disc Thickness | 8 mm |
| Additional Information 2 | with ABS sensor ring |
| Thickness | 86 mm |
| Outer diameter | 260 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.59
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Function | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.62
Important compatibility info
| Inner diameter | 17 mm |
| Outer diameter | 62 mm |
| Width | 53 mm |
| Number of Ribs | 6 |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.62
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 05023 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.62
Important compatibility info
| Number of Connectors / Ports | 12. 4. 14 |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.63
Important compatibility info
| Length | 210 mm |
| Width | 135 mm |
| Thickness | 152 mm |
| Function | Bush, parabolic spring |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.64
Important compatibility info
| Cone Size | 28 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Steering arm type | Trailing Arm, Control Arm |
| Paired article numbers | 181131 |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Material | Cast Steel |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.64
Important compatibility info
| Length | 555 mm |
| Function | Expansion Tank, coolant |
| Material | PP (Polypropylene) |
| Thickness | 205 mm |
| Width | 290 mm |
| Fill quantity | 8.5 l |
| Additional Information | with coolant level sensor |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Expansion Tank, coolant (39947)
- 1x Febi Cap, coolant tank (11562)
- 1x Febi Sensor, coolant level (35357)
£100.66
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 108 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Timing Chain Size | G67HP, G67HR |
| Replaces | 44958 |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33899)
- 1x Febi Tensioner, timing chain (30496)
- 1x Febi Guide, timing chain (30531)
£100.68
Important compatibility info
| for OE number | 005 430 65 01 |
| Function | Brake Master Cylinder |
| Internal Thread Size | M12 x 1 |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.68
Important compatibility info
| Placement on Vehicle | behind exhaust turbocharger |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.68
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023