Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Plastic |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Opening Temperature | 105 °C |
| Function | Thermostat Housing |
| Type | Thermostat Housing |
| Additional Information | with gasket/seal |
| Additional Information 2 | with sensor, with Temperature Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.54
Important compatibility info
| Function | Bellow, air suspension |
| Outer diameter | 242 mm. 229 mm |
| Thickness | 530 mm. 125 mm |
| External Thread Size | M10 x 1,5, M16 x 1,5, 1/2" - 13 UNF |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.56
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | non-steered leading axle |
| Outer diameter | 228 mm. 220 mm |
| Thickness | 190 mm. 445 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.58
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.59
Important compatibility info
| External Thread Size | M16 x 1,5, M14 x 2 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Thickness | 480 mm. 180 mm |
| Outer diameter | 228 mm. 195 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.63
Important compatibility info
| Units / Pulleys | incl. deflection pulley |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Additional Information | with belt tensioner for V-ribbed belt |
| Length 1 | 1041 mm |
| Length 2 | 1815 mm |
| Number of ribs 2 | 12 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (40316)
- 1x Febi V-Ribbed Belt (29117)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (22974)
- 1x Febi Belt Tensioner, v-ribbed belt (22975)
£104.64
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Injector |
| Type | Injector |
| Additional Information | with gaskets/seals |
| Colour Coding | Green |
Additional Information
Technical Information
Please compare the colour coding.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.64
Important compatibility info
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 54 mm |
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.65
Important compatibility info
| Additional Information | with Thrust Bearing |
| Outer diameter | 37.5 mm |
| Additional Information 2 | with bearing |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Length | 192 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (14578)
- 1x Febi Bush, kingpin (14588)
- 1x Febi Bush, steering knuckle (14575)
- 1x Febi Bush, steering knuckle (14576)
- 2x Febi Seal Ring, steering knuckle (14577)
- 2x Febi Lock Ring, steering knuckle (14579)
- 2x Febi Sealing/Protective Cap (08522)
- 2x Febi Circlip (14933)
- 2x Febi Grease Nipple (01094)
- 1x Febi Spacer, kingpin (14580)
- 1x Febi Spacer, kingpin (14581)
- 1x Febi Spacer, kingpin (14582)
- 1x Febi Spacer, kingpin (14583)
- 1x Febi Spacer, kingpin (14584)
- 1x Febi Spacer, kingpin (14585)
- 1x Febi Spacer, kingpin (14586)
- 1x Febi Spacer, kingpin (14587)
£104.68
Important compatibility info
| Function | Oil Pump |
| for OE number | 06A 115 105 B S1 |
| Type | Oil Pump |
| Additional Information | with oil pump chain, with chain tensioner |
| Timing Chain Size | G52H |
| Additional Information 2 | with gear |
| Number of Teeth | 50 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33638)
- 1x Febi Chain Tensioner, oil pump drive (33637)
- 1x Febi Oil Pump (22204)
£104.68
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Length | 872 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Colour | Black |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Additional Information 2 | with crown nut |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Length | 1645 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Pipe Diameter | 42 mm |
| Cone Size | 28.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Quality/ Grade | 10.9 |
| Function | Cylinder Head Bolt Set |
| Length | 152 mm |
| Spanner Size | 17 |
| External Thread Size | M12 x 1,75, M16 x 2 |
| Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 8x Febi Cylinder Head Bolt (18476)
- 34x Febi Cylinder Head Bolt (18477)
£104.68
Important compatibility info
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 275 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Outer diameter | 330 mm |
| Thickness | 141 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Function | Brake Disc |
| Surface | Coated |
| Number of Holes | 8 |
| Additional Information 2 | with ABS sensor ring |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Pneumatic |
| Placement on Vehicle | Front |
| Min. Length | 284 mm |
| Max. Length | 379 mm |
| Pipe Diameter | 44 mm. 53 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M10 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Front Axle, from 1st to 2nd intermediate steering lever |
| Length | 989 mm |
| Width | 69 mm |
| Thickness | 128 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 32 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M24 x 1,5 RHT |
| External Thread Size | M24 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Cone Size | 28.6 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Pipe Diameter | 40 mm |
| Width | 40 mm |
| Thickness | 115 mm |
| Length | 743 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Suction side external thread size | M12 x 1,5 |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Pressure side external thread size | M14 x 1,5 |
| Function | Tilt Pump, driver cab |
| Type | Tilt Pump, driver cab |
| Hole Spacing | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Pipe Diameter | 50 mm |
| Adjustable | Adjustable on one side |
| Placement on Vehicle | Front Axle |
| Cone Size | 30 mm |
| Length | 635 mm |
| Internal Thread Size | M38 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Left, Lower Front Axle |
| Length | 659 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023