Proud to be a UK-based company
Contact us
Important compatibility info
| Operating Mode | Mechanical |
| Min. Length | 283 mm |
| Pipe Diameter | 50 mm |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 50 mm. 20 mm |
| Max. Length | 298 mm |
| Placement on Vehicle | Right Front |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Function | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Placement on Vehicle | Rear Axle |
| Stabiliser Diameter | 20 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174329)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
- 2x Febi Link/Coupling Rod, stabiliser bar (29461)
£102.70
Important compatibility info
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
| for OE number | 81.30550.0089 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 179213 |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Inner length 1 | 650 mm |
| Inner length 2 | 675 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 997 mm |
| Outer length 2 | 927 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Inner length 1 | 912 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 722 mm |
| Outer length 1 | 1070 mm |
| Outer length 2 | 1017 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Placement on Vehicle | Left |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 38 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 924 mm |
| Wheel Sided Joint Diameter | 105 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Type | Drive Shaft |
| Transmission-side joint diameter | 84.1 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Min. Length | 610 mm |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 40 |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Thread Size | M16x1,6 |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Additional Information 2 | with bolts/screws |
| Transmission-side joint diameter | 109.7 mm |
| External Teeth, Wheel Side | 36 |
| Min. Length | 783 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | 95517924 |
| Ignition Coil | 4 Spark |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Width | 26 mm |
| Number of Teeth | 141 |
| Surface | Coated |
| for OE number | 076 198 119 |
| Function | Timing Belt Kit |
| Units / Pulleys | incl. tensioner pulley, incl. guide pulleys |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (34122)
- 1x Febi Tensioner Pulley, timing belt (14732)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (10045)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (199436)
£102.71
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| for OE number | 651 090 02 48 |
| Type | Mass Air Flow Sensor |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.71
Important compatibility info
| Type | Valve Plate, air compressor |
| Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.73
Important compatibility info
| Number of mounting bores | 3 |
| Type | Central Slave Cylinder, clutch |
| for OE number | 1 672 781 |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.75
Important compatibility info
| Type | Wiper Motor |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Function | Wiper Motor |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.75
Important compatibility info
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Number of Teeth | 116 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Additional Information | with gasket/seal |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Width | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (37460)
- 1x Febi Water Pump, engine cooling (38898)
£102.77
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 1609 853 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.78
Important compatibility info
| Type | Fuel Cut-off, injection system |
| Number of Connectors / Ports | 2 |
| Function | Fuel Cut-off, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.79
Important compatibility info
| Function | Bellow, air suspension |
| Thickness | 210 mm. 412 mm |
| Outer diameter | 286 mm. 225 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.80
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023