Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Injector |
| Type | Injector |
| Additional Information | with gaskets/seals |
| Colour Coding | Green |
Additional Information
Technical Information
Please compare the colour coding.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.64
Important compatibility info
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.64
Important compatibility info
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 54 mm |
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.65
Important compatibility info
| Additional Information 2 | with switch |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Lock System | with lock barrel, with two keys |
| Type | Steering Lock |
| Housing material | Metal |
| Function | Steering Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.65
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.67
Important compatibility info
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information | with nuts |
| Outer diameter | 150 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 64 mm |
| Function | Joint, propshaft |
| Number of Holes | 8 |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (27582)
- 8x Febi Screw (19106)
- 8x Febi Washer (19107)
- 8x Febi Nut (19104)
£104.68
Important compatibility info
| Min. Length | 297 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 25 mm |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 330 mm |
| External Thread Size | M14 x 1,5 |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Placement on Vehicle | Rear Axle Right |
| Function | Wheel Bearing Kit |
| Width | 60 mm |
| Outer diameter | 72 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Inner diameter | 26 mm |
| Paired article numbers | 179850 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Width | 60 mm |
| Inner diameter | 26 mm |
| Outer diameter | 72 mm |
| Paired article numbers | 179849 |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 101.6 mm |
| Outer diameter | 92.2 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 35 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 38 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 872 mm |
| Wheel Sided Joint Diameter | 106 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 38 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 880 mm |
| Wheel Sided Joint Diameter | 106 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 95 mm |
| Outer diameter | 140 mm |
| Additional Information 2 | with ABS sensor ring |
| Inner diameter | 50 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.68
Important compatibility info
| Placement on Vehicle | Front, Left |
| Number of Connectors / Ports | 2 |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.69
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 337 mm |
| Thickness | 61.9 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.74
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Brake Disc Thickness | 36 mm |
| Outer diameter | 385 mm |
| Thickness | 62.1 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Paired article numbers | 107502 |
| Minimum thickness | 34.4 mm |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.74
Important compatibility info
| Voltage | 12 V |
| Function | Starter |
| Rated Power | 1.7 kW |
| Number of Teeth | 11 |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.76
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 745 mm |
| Steering arm type | Control Arm |
| Bore Diameter | 21 mm |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.79
Important compatibility info
| Minimum thickness | 27 mm |
| Function | Brake Disc |
| Placement on Vehicle | Front Axle |
| Outer diameter | 360 mm |
| Thickness | 81 mm |
| Brake Disc Thickness | 30 mm |
| Rotor Style | Internally Vented |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.80
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023