Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 1130 mm |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28926)
- 1x Febi Belt Tensioner, v-ribbed belt (27835)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (47861)
£109.63
Important compatibility info
| Number of Connectors / Ports | 4 |
| for OE number | 13 62 8 570 107 |
| Housing Type | without housing |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.63
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 985 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | adjustable |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.63
Important compatibility info
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Number of mounting bores | 3 |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.63
Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information | with fastening/mounting material |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Water pump impeller material | Metal |
| Number of Wings | 4 |
| Type | Water Pump, engine cooling |
| Replaces | 10647; 12367 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.64
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.64
Important compatibility info
| Function | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 180 |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (179465)
- 1x Febi Tensioner, timing chain (170729)
- 1x Febi Guide, timing chain (180667)
- 1x Febi Guide, timing chain (180500)
£109.64
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.64
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Wheel Side | 28 |
| Min. Length | 622 mm |
| Type | Drive Shaft |
| Thread Size | M22x1,5 |
| Paired article numbers | 193517 |
| External Teeth, Diff.Side | 24 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.64
Important compatibility info
| External Teeth, Diff.Side | 22 |
| Min. Length | 605 mm |
| Thread Size | M20x1,5 |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 25 |
| Wheel Sided Joint Diameter | 76.4 mm |
| Transmission-side joint diameter | 76 mm |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.64
Important compatibility info
| Replaces | 20082; 20290 |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 765 mm |
| Min. Length | 465 mm |
| Pipe Diameter | 74 mm. 66 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.65
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 122 |
| Timing Chain Size | G68HR |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Function | Timing Chain Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. The special tool must be used for installation / removal.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40429)
- 1x Febi Tensioner, timing chain (46511)
- 1x Febi Guide, timing chain (46773)
- 1x Febi Guide, timing chain (104078)
- 1x Febi Guide, timing chain (104079)
£109.70
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Thread Length | 30 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 512 mm |
| Min. Length | 322 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Replaces | 20122 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1013 mm |
| Function | Stabiliser Bar, suspension |
| Additional Information | with rubber mounts |
| Type | Stabiliser Bar, suspension |
| Stabiliser Diameter | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.80
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Rubber/Metal |
| Paired article numbers | 106134 |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.80
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | electrically adjustable hydro mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.82
Important compatibility info
| Replaces | 20455 |
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 647 mm |
| Min. Length | 401 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.83
Important compatibility info
| Number of Wings | 7 |
| Additional Information | with solenoid valve, with fastening/mounting material, with gasket/seal |
| Additional Information 2 | switchable water pump |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.88
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 176657 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.92
Important compatibility info
| Additional Information | with piston |
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm. 170 mm |
| Thickness | 137 mm. 610 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.94
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023