Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 2. 4 |
| Function | Sender Unit, fuel tank |
| Screw length below head | 508 mm |
| for OE number | 81.27203.6017 |
| Type | Sender Unit, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.25
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1 871 258 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.35
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 39 mm |
| Operating Mode | Automatic |
| Number of Ribs | 10 |
| Outer diameter | 78 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.42
Important compatibility info
| Type | Shock Absorber |
| Piston conrod diameter | 20 mm |
| Max. Length | 890 mm |
| Min. Length | 525 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 16 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.47
Important compatibility info
| Function | Housing, oil filter |
| Type | Housing, oil filter |
| Additional Information | with gasket/seal, with oil cooler, with oil filter |
| Width | 185 mm |
| Height | 227 mm |
| Length | 217 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.52
Important compatibility info
| Placement on Vehicle | Right |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Aluminium |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.54
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 134 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| for OE number | 06 15 418 |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33047)
- 1x Febi Tensioner, timing chain (33048)
- 1x Febi Guide, timing chain (173744)
- 1x Febi Guide, timing chain (173891)
- 1x Febi Guide, timing chain (173888)
- 1x Febi Gear, balance shaft (173892)
- 1x Febi Gear, balance shaft (175525)
- 1x Febi Gear, balance shaft (175055)
- 4x Febi Screw (33067)
- 1x Febi Thrust Washer (33111)
- 3x Febi Screw (33068)
£113.55
Important compatibility info
| for OE number | 24312-27250 S2 |
| Number of Teeth | 123 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Width | 28 mm |
| Water pump impeller material | Metal |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (31213)
- 1x Febi Water Pump, engine cooling (26462)
£113.55
Important compatibility info
| Min. Length | 471 mm |
| Pipe Diameter | 73 mm. 63 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Function | Shock Absorber |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 20 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 764 mm |
| Shock Absorber Type | Oil Pressure |
| Type | Shock Absorber |
| Replaces | 20116 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.55
Important compatibility info
| Type | Alternator |
| Function | Alternator |
| Belt Pulley Diameter | 54 mm |
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.55
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 48 mm |
| Current Strength | 90 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.55
Important compatibility info
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Inner Length | 606 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 690 mm |
| Outer diameter | 42 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Thickness | 121 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 62 mm |
| Placement on Vehicle | Front Axle |
| Length | 845 mm |
| Width | 68 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M38 x 1,5 RHT |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 50 |
| Timing Chain Size | G67HP, G67HR, G67AM |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Replaces | 102374 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (27070)
- 1x Febi Gasket Set, cylinder head cover (23548)
- 1x Febi Seal, timing chain tensioner (32294)
- 2x Febi Shaft Seal, crankshaft (38238)
- 1x Febi Timing Chain (25360)
£113.59
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Clutch Booster |
| Type | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 73 mm |
| Outer diameter | 81 mm |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Inner diameter | 27 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Outer diameter 1 | 63 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter 2 | 136 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 444 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Hole Spacing | 130 mm |
| Placement on Vehicle | Rear Axle |
| Length | 576 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 18 mm |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 379 mm |
| Min. Length | 334 mm |
| Operating Mode | Pneumatic |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023