Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle, Upper Left |
| Cone Size | 18 mm |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 179576 |
| Weight | 1.958 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Weight | 5.985 kg |
| Mounting points diameter | 10.5 mm |
| Function | Hydraulic Pump, steering |
| Pressure | 135 bar |
| Operating Mode | Hydraulic |
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
| Hole Spacing | 120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Rated Power | 2.3 kW |
| Weight | 4.40 kg |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Core Length | 370 mm |
| Core Width | 179 mm |
| Core Depth | 32 mm |
| Function | Heat Exchanger, interior heating |
| Type | Heat Exchanger, interior heating |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Function | Dosing Module, urea injection |
| Weight | 0.28 kg |
| Type | Dosing Module, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 26 mm |
| Parameter | 7PK |
| Width | 146 mm |
| Outer diameter | 146 mm |
| Weight | 1.347 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Length | 1322 mm |
| Number of Ribs | 7 |
| Weight | 1.091 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (34337)
- 1x Febi Belt Tensioner, v-ribbed belt (100188)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (36826)
£110.62
Important compatibility info
| Pipe Diameter | 60 mm |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle, outer |
| Length | 1052 mm |
| Additional Information 2 | with crown nut |
| Steering arm type | Control Arm |
| Rod/Strut | Push Rod |
| Weight | 11.794 kg |
| Cone Size | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Width | 220 mm |
| Material | Cast Steel |
| Brake Pad | without lining |
| Function | Brake Shoe |
| Weight | 11.74 kg |
| Type | Brake Shoe |
| Thickness/Strength 1 | 12.8 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Weight | 11.0 kg |
| Function | Centre Rod Assembly |
| Width | 40 mm |
| Thickness | 116 mm |
| Rod/Strut | Push Rod |
| Thread Type | with right-hand thread |
| Internal Thread Size | M30 x 1,5 |
| Pipe Diameter | 60 mm |
| Cone Size | 30 mm |
| Length | 825 mm |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 1.958 kg |
| Cone Size | 18 mm |
| Paired article numbers | 179577 |
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Steering arm type | Triangular Control Arm (CV) |
| Placement on Vehicle | Front Axle, Upper Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Weight | 1.350 kg |
| Outer diameter | 95 mm |
| Operating Mode | Mechanical |
| Number of Connectors / Ports | 2 |
| Type | Fuel Pump |
| Function | Fuel Pump |
| for OE number | 1797 650 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.63
Important compatibility info
| Weight | 5.9 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm |
| Thickness | 210 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.65
Important compatibility info
| Additional Information | with seal rings |
| Material | Grey Cast Iron |
| Weight | 1.040 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal, Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Thickness | 330 mm |
| Type | Bellow, air suspension |
| Weight | 4.0 kg |
| Function | Bellow, air suspension |
| Outer diameter | 258 mm. 150 mm |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Number of Teeth | 145 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Weight | 2.021 kg |
| Type | Water Pump & Timing Belt Kit |
| Additional Information | with fastening/mounting material |
| Water pump impeller material | Metal |
| Additional Information 2 | non-switchable water pump |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (103078)
- 1x Febi Timing Belt Kit (100790)
£110.70
Important compatibility info
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Spanner Size | 22 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Weight | 0.080 kg |
| Placement on Vehicle | before catalytic converter |
| External Thread Size | M18 x 1,5 |
| Cable Length | 370 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Placement on Vehicle | both sides, Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 6.597 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.76
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 17 mm |
| Weight | 10.5 kg |
| Rod/Strut | Guide Rod |
| Length | 449 mm |
| Pipe Diameter | 50 mm |
| Steering arm type | Trailing Arm |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.78
Important compatibility info
| Weight | 6.945 kg |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21302 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.78
Important compatibility info
| External Thread Size | M12 x 1,75, M16 x 1,5 |
| Outer diameter | 228 mm. 238 mm |
| Thickness | 348 mm. 122 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Weight | 5.7 kg |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.80
Important compatibility info
| Surface | Coated |
| Weight | 2.63 kg |
| Number of Teeth | 160 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 03L 198 119 F S1 |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (37021)
- 1x Febi Water Pump, engine cooling (36048)
£110.84
Important compatibility info
| Rotor Style | slotted/perforated, internally vented |
| Weight | 18.05 kg |
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 390 mm |
| Thickness | 54.3 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.85
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Weight | 1.575 kg |
| for OE number | 4G0 199 381 NT |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.87
Important compatibility info
| Weight | 8.5 kg |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Outer diameter | 258 mm. 224 mm |
| Thickness | 350 mm. 110 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M10 x 1,5, M16 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.91
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 102 mm |
| Transmission-side joint diameter | 95.5 mm |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 29 |
| Weight | 9.280 kg |
| External Teeth, Diff.Side | 29 |
| Min. Length | 650 mm |
| Paired article numbers | 182959 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.94
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 176657 |
| Weight | 1.442 kg |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.98
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Weight | 1.630 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.99
Important compatibility info
| Weight | 5.43 kg |
| Material | Aluminium |
| Paired article numbers | 174696 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber-metal mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.08
Important compatibility info
| Paired article numbers | 174697 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Weight | 5.43 kg |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.08
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023