Proud to be a UK-based company
Contact us
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Function | Air Tank, compressed-air system |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
| Capacity | 20 l |
| Operating Pressure | 15.5 bar |
| Outer diameter | 206 mm |
| Material | Steel |
| Length | 691 mm |
| Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.81
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 80 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G67HR, G67HP |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (17616)
- 1x Febi Tensioner, timing chain (12979)
£107.85
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Function | Release Fork, clutch |
| for OE number | 1438 641 |
| Type | Release Fork, clutch |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.85
Important compatibility info
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.86
Important compatibility info
| Placement on Vehicle | Rear, Left, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.86
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.86
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 338 mm |
| Thickness | 73.2 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.86
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 294 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.87
Important compatibility info
| Water pump impeller material | Metal |
| Width | 23 mm |
| Number of Teeth | 142 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| for OE number | 30731727 S1 |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (27559)
- 1x Febi Water Pump, engine cooling (22145)
£107.87
Important compatibility info
| Function | Charge Air Hose |
| Inner diameter | 97 mm |
| Outer diameter | 119 mm |
| Type | Charge Air Hose |
| Hose Length | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.89
Important compatibility info
| Number of Connectors / Ports | 2 |
| Mounting points diameter | 11 mm |
| Pressure | 130 bar |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Rotation Direction | Clockwise rotation |
| Hole Spacing | 104 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.89
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
| for OE number | 403 200 77 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.91
Important compatibility info
| Width | 360 mm |
| Inner diameter 1 | 10 mm |
| Inner diameter 2 | 5 mm |
| not suited for fuel type | Ethanol Blended Petrol (E10) |
| Function | Fuel Hose |
| Length | 750 mm |
| Height | 170 mm |
| Type | Fuel Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.91
Important compatibility info
| Outer diameter | 226 mm. 335 mm |
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| Type | Bellow, air suspension |
| Thickness | 360 mm. 205 mm |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.91
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 1.8 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.96
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 320 mm. 615 mm |
| Outer diameter | 286 mm. 260 mm |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.97
Important compatibility info
| Inner length 1 | 778 mm |
| Inner length 2 | 798 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Outer length 1 | 1112 mm |
| Outer length 2 | 1139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.99
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 785 mm |
| Inner length 1 | 792 mm |
| Outer length 1 | 1015 mm |
| Outer length 2 | 1020 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.03
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.05
Important compatibility info
| for OE number | 246 240 26 17 |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.05
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023