Important compatibility info
| Thread Measurement 2 | M10x1 |
| Thread Measurement 1 | M10x1 |
| Function | Brake Hose |
| Length | 287 mm |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Thread Type | with internal thread |
Important compatibility info
| Function | Brake Hose |
| Additional Information | with banjo fitting |
| Placement on Vehicle | Rear Axle Left |
| Additional Information 2 | without banjo bolt |
| Length | 355 mm |
| Thread Measurement 1 | M10x1 |
| Thread Type | with internal thread |
| Type | Brake Hose |
Important compatibility info
| Length | 445 mm |
| Function | Brake Hose |
| Thread Measurement 1 | 3/8"x24 |
| Thread Measurement 2 | 3/8"x24 |
| Type | Brake Hose |
| Thread Type | with internal thread |
Important compatibility info
| Function | Brake Hose |
| Length | 292 mm |
| Type | Brake Hose |
| Thread Type | with internal thread |
Important compatibility info
| Function | Bushing, axle cross member |
| Material | Metal |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Bushing, axle cross member |
Important compatibility info
| Height 2 | 26 mm |
| Height 1 | 57 mm |
| Diameter | 67 mm |
| Height | 57 mm |
| Additional Information | with gaskets/seals |
| Function | Thermostat, coolant |
| Opening Temperature | 88 °C |
| Replaces | BBT022 |
| Type | Thermostat, coolant |
| Housing Type | without housing |
Important compatibility info
| Length | 245 mm |
| Function | Brake Hose |
| Thread Type | with internal thread |
| Type | Brake Hose |
| Additional Information | with banjo fitting |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Measurement 2 | M12X1.25 |
| Thread Size | M12X1.25 |
| Length | 216 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Mounting Type | Pressed |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.25 |
| Bore Diameter | 40 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Bore Diameter 1 | 14.6 mm |
| Bore Diameter 2 | 16 mm |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Length | 94 mm |
| Inner diameter 2 | 64 mm |
| Inner diameter 1 | 25 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, transmission sided |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Additional Information 2 | with clamps |
Important compatibility info
| Material | Aluminium |
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 255 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Thread Measurement 2 | M10X1.5 |
| Thread Size | M10X1.5 |
| Length | 240 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL6306 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Mounting Type | Pressed |
| Steering arm type | for control arm |
| Function | Ball Joint |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
| Height | 25 mm |
| Function | Rolling Bearing, suspension strut support mount |
| Inner diameter | 67 mm |
| Outer diameter | 112 mm |
| Type | Rolling Bearing, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Thread Measurement 1 | M10x1 |
| Thread Type | with internal thread |
| Thread Measurement 2 | M10x1 |
| Length | 276 mm |
| Function | Brake Hose |
| Type | Brake Hose |
Important compatibility info
| Diameter | 19 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Length 1 | 1905 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear, Right Rear |
Important compatibility info
| Housing Type | without housing |
| Additional Information | without gaskets/seals |
| Opening Temperature | 90 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Replaced by | BBT366 |
Important compatibility info
Important compatibility info
| Length 1 | 1840 mm |
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Left Front, Right Front |
| Type | Cable Pull, parking brake |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















