Proud to be a UK-based company
Contact us
Important compatibility info
| Max. Length | 272 mm |
| Min. Length | 222 mm |
| Pipe Diameter | 45 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,5 |
| Weight | 4.5 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Yoke |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Weight | 5.89 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 128 mm |
| Outer diameter | 128 mm |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| for OE number | 3748.A3 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 85 A |
| Belt Pulley Diameter | 48 mm |
| Weight | 4.6 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Water pump impeller material | Grey Cast Iron |
| Material | Grey Cast Iron |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Weight | 7.075 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Weight | 2.321 kg |
| Placement on Vehicle | Front Axle |
| Width | 95 mm |
| Outer diameter | 150 mm |
| Inner diameter | 21.5 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (05417)
- 1x Febi Shaft Seal, wheel hub (28257)
- 1x Febi Wheel Bearing (06126)
£113.59
Important compatibility info
| Weight | 0.9 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 50 |
| Timing Chain Size | G67HP, G67HR, G67AM |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Replaces | 102375 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (28446)
- 1x Febi Timing Chain (25360)
- 1x Febi Seal, timing chain tensioner (32294)
- 1x Febi Gasket Set, cylinder head cover (23548)
- 2x Febi Shaft Seal, crankshaft (38238)
£113.59
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 51 mm |
| Outer diameter | 89 mm |
| Inner diameter | 28 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Weight | 4.710 kg |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 180935 |
| Weight | 6.275 kg |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 18 mm |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 379 mm |
| Min. Length | 334 mm |
| Weight | 2.9 kg |
| Operating Mode | Pneumatic |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Weight | 2.13 kg |
| Length | 190 mm |
| Height | 160 mm |
| Width | 150 mm |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023