Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.191 kg |
| Material | Cast Aluminium |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.42
Important compatibility info
| Weight | 7.750 kg |
| Material | Grey Cast Iron |
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 51.06500.6669 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.42
Important compatibility info
| Weight | 0.658 kg |
| Length | 1150 mm |
| Width | 387 mm |
| Material | Rubber |
| Thickness | 18 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.42
Important compatibility info
| Hole Spacing | 115 mm |
| Weight | 10.8 kg |
| Placement on Vehicle | Rear Axle |
| Length | 666 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.42
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Weight | 5.63 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 526 mm |
| Min. Length | 325 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Replaces | 20032 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.47
Important compatibility info
| Operating pressure to | 8 bar |
| for OE number | 49110-3X01A |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Weight | 1.906 kg |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Outer diameter | 17 mm |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.49
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 2.858 kg |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.51
Important compatibility info
| Weight | 1.1 kg |
| Width of castor bearing surface | 26.5 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.53
Important compatibility info
| Weight | 3.8 kg |
| Placement on Vehicle | Rear Axle |
| Width | 136 mm |
| Outer diameter | 81 mm |
| Inner diameter | 27 mm |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.53
Important compatibility info
| Weight | 2.49 kg |
| Function | Bush, kingpin |
| Extra Description | ProKit |
| Type | Bush, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (38490)
- 1x Febi Ball Joint (28356)
- 1x Febi Mounting, control/trailing arm (44400)
- 2x Febi Mounting, control/trailing arm (26933)
- 1x Febi Screw (44467)
- 1x Febi Screw (44469)
- 2x Febi Nut (44470)
£115.53
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.8 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.53
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 70 mm |
| Wheel Sided Joint Diameter | 80.5 mm |
| Min. Length | 819 mm |
| External Teeth, Diff.Side | 26 |
| Thread Size | M24 x 1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 6.474 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.53
Important compatibility info
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Weight | 1.63 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.55
Important compatibility info
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Weight | 6.0 kg |
| Surface | Oiled |
| Centering Diameter | 52 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Brake Disc Thickness | 8 mm |
| Additional Information 2 | with ABS sensor ring |
| Thickness | 86 mm |
| Outer diameter | 260 mm |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.56
Important compatibility info
| Function | Water Pump, engine cooling |
| Additional Information 2 | switchable water pump |
| Type | Water Pump, engine cooling |
| Number of Wings | 9 |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| Additional Information | with gasket/seal |
| Weight | 1.52 kg |
| Number of grooves | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.56
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.86 kg |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 448 mm |
| Core Width | 153 mm |
| Core Depth | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Extra Description | Full Kit |
| Weight | 1.22 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 150 |
| Timing Chain Size | Z46-16 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. The special tool must be used for installation / removal.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48577)
- 1x Febi Tensioner, timing chain (40379)
- 1x Febi Guide, timing chain (36631)
- 1x Febi Guide, timing chain (36632)
- 1x Febi Gear/Sprocket, camshaft (104253)
- 1x Febi Bolt, camshaft gear (46364)
- 1x Febi Shaft Seal, crankshaft (38238)
- 1x Febi Pulley Bolt (32025)
- 12x Febi Screw (172940)
- 1x Febi Screw (172938)
- 2x Febi Screw (173689)
- 1x Febi Screw (173512)
£115.57
Important compatibility info
| Weight | 0.843 kg |
| Function | EGR Valve |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Weight | 0.690 kg |
| Height | 233 mm |
| Outer diameter | 111 mm |
| Filter type | Filter Insert |
| Type | Fuel filter set |
| Function | Fuel filter set |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Length | 1675 mm |
| Weight | 1.096 kg |
| Tensile Cord Material | Polyester |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Number of Ribs | 7 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (180079)
- 1x Febi Belt Tensioner, v-ribbed belt (100188)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (36826)
£115.57
Important compatibility info
| Weight | 2.830 kg |
| Fill Medium | Mineral Oil |
| Function | Clutch Booster |
| Type | Clutch Booster |
| Additional Information 2 | with sensor |
| Mounting bores distance | 139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Weight | 0.102 kg |
| Type | Oxygen Sensor |
| Number of circuits | 4 |
| Cable Length | 625 mm |
| Lambda Sensor | Heated |
| External Thread Size | M18 x 1,5 |
| Function | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Number of Holes | 6 |
| Weight | 0.32 kg |
| Type | Solenoid Valve, shift cylinder |
| Function | Solenoid Valve, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Function | Starter |
| Weight | 3.96 kg |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Placement on Vehicle | Front |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Function | Wiper Motor |
| Weight | 1.208 kg |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Placement on Vehicle | Centre |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 200 |
| Function | Timing Chain |
| Weight | 0.680 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Function | Timing Chain Kit |
| Weight | 0.711 kg |
| Number of Chain Links | 98 |
| Chain Type | Simplex, Closed chain |
| Type | Timing Chain Kit |
| Timing Chain Size | G68V |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25404)
- 1x Febi Tensioner, timing chain (32786)
- 1x Febi Guide, timing chain (45731)
- 1x Febi Guide, timing chain (49229)
- 1x Febi Guide, timing chain (49231)
£115.57
Important compatibility info
| Number of Connectors / Ports | 6 |
| for OE number | 4 515 688 |
| Weight | 0.038 kg |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.69
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 358 mm |
| Thickness | 73.5 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 85 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Weight | 9.66 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.69
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Mounting points diameter | 11 mm |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
| Number of Connectors / Ports | 2 |
| Weight | 2.77 kg |
| Type | Hydraulic Pump, steering |
| for OE number | 1 439 958 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.71
Important compatibility info
| Weight | 2.7 kg |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.73
Important compatibility info
| External Thread Size | M16 x 2, M12 x 1,5, M22 x 1,5, M8 x 1,25, M12 x 1,75 |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| Weight | 6.6 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Outer diameter | 258 mm |
| Thickness | 695 mm. 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.79
Important compatibility info
| Weight | 2.5 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.79
Important compatibility info
| Function | Camshaft Adjuster |
| Number of Teeth | 40 |
| Weight | 0.940 kg |
| Height | 36.8 mm |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Exhaust Side |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.82
Important compatibility info
| Weight | 0.92 kg |
| Placement on Vehicle | Intake Side |
| Height | 36.5 mm |
| Number of Teeth | 40 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.82
Important compatibility info
| Weight | 10.7 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 324 mm |
| Thickness | 52 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.84
Important compatibility info
| Placement on Vehicle | Rear Axle, Front |
| Additional Information | with piston |
| Outer diameter | 258 mm. 226 mm |
| Thickness | 157 mm. 475 mm |
| Weight | 7.3 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.87
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 321 mm |
| Thickness | 52.3 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Weight | 10.66 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 10 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.02
Important compatibility info
| Length | 430 mm |
| Spanner Size | 19 |
| Weight | 3.33 kg |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with seal ring |
| Additional Information | with oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.06
Important compatibility info
| Weight | 11.09 kg |
| Placement on Vehicle | Front Axle |
| Length | 697 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.13
Important compatibility info
| Function | Throttle body |
| Weight | 0.96 kg |
| Type | Throttle body |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.14
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 148 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Weight | 1.697 kg |
| Width | 23 mm |
| Belts | with trapezoidal tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (30618)
- 1x Febi Timing Belt Kit (30586)
£116.14
Important compatibility info
| Function | EGR Valve |
| Placement on Vehicle | Right |
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Paired article numbers | 174957 |
| Weight | 0.792 kg |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.17
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.133 kg |
| Cable Length | 964 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.18
Important compatibility info
| Weight | 0.82 kg |
| Number of Connectors / Ports | 5 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.19
Important compatibility info
| Weight | 2.55 kg |
| Number of Teeth | 141 |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Replaces | 45119 |
| Type | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (30580)
- 1x Febi Water Pump, engine cooling (24360)
£116.23
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 274 mm |
| Thickness | 10.9 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 52.3 mm |
| Surface | Oiled |
| Function | Brake Disc |
| Weight | 7.0 kg |
| Rotor Style | Solid |
| Additional Information 2 | with ABS sensor ring, with grease cap |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.27
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 6.8 kg |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Oiled |
| Function | Brake Disc |
| Brake Disc Thickness | 10 mm |
| Thickness | 10 mm |
| Outer diameter | 270 mm |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Additional Information 2 | with ABS sensor ring, with grease cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.27
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Additional Information 2 | with ball joint, with rubber mount |
| Steering arm type | Control Arm |
| Paired article numbers | 180935 |
| Weight | 6.275 kg |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.30
Important compatibility info
| External Thread Size | M8 x 1,25, M22 x 1,5 |
| Placement on Vehicle | non-steered trailing axle |
| Outer diameter | 286 mm |
| Thickness | 262 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Weight | 7.14 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.30
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023