Proud to be a UK-based company
Contact us
Important compatibility info
| Bore Diameter | 19 mm |
| Placement on Vehicle | Rear Axle |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Length | 540 mm |
| Material | Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.42
Important compatibility info
| for OE number | 21789668 |
| Inner Length | 3055 mm |
| Outer Length | 3322 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.42
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 54 mm |
| Number of Connectors / Ports | 2 |
| Current Strength | 100 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.42
Important compatibility info
| Number of Teeth | 168 |
| for OE number | 71771580 |
| Belts | with trapezoidal tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (10982)
- 1x Febi Tensioner Pulley, timing belt (11552)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (10649)
- 1x Febi Water Pump, engine cooling (10599)
£130.43
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Front Axle |
| Outer diameter | 226 mm. 150 mm |
| Thickness | 205 mm. 640 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.57
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.62
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Voltage | 12 V |
| Height | 84 mm |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Throttle Body (100768)
- 1x Febi Gasket, throttle body (103796)
£130.79
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Type | Alternator |
| Belt Pulley Diameter | 56 mm |
| Alternator Charge Current | 140 A |
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.91
Important compatibility info
| Placement on Vehicle | Left |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| Paired article numbers | 176649 |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.91
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 258 mm. 226 mm |
| Thickness | 157 mm. 474 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M22 x 1,5 |
| Additional Information | with piston |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.91
Important compatibility info
| Function | Vacuum Pump, braking system |
| Type | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.93
Important compatibility info
| Type | Sensor, eccentric shaft (variable valve lift) |
| Function | Sensor, eccentric shaft (variable valve lift) |
| Spanner Size | 10 |
| Number of Connectors / Ports | 9 |
| Bolt Head/Nut Design | External Hexagon |
| External Thread Size | M6 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.00
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 197 mm |
| Thickness | 210 mm. 708 mm |
| External Thread Size | M16 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Internal Thread Size | M22 x 1,5 |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.09
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.16
Important compatibility info
| Additional Information | with gaskets/seals |
| Heating / Cooling | without breather valve |
| Material | Aluminium |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cylinder Head Cover (108262)
- 1x Febi Gasket, cylinder head cover (36708)
- 4x Febi Seal, injector shaft (36166)
£131.27
Important compatibility info
| Function | Vacuum Pump, braking system |
| Type | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.37
Important compatibility info
| Material | Plastic |
| Colour | Black, White |
| Number of Connectors / Ports | 5 |
| Type | Control, swirl flaps (induction pipe) |
| Function | Control, swirl flaps (induction pipe) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.39
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Function | Control, swirl flaps (induction pipe) |
| Extra Description | febi Plus |
| Type | Control, swirl flaps (induction pipe) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.39
Important compatibility info
| Placement on Vehicle | Intake Side |
| Number of Teeth | 36 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.40
Important compatibility info
| Outer diameter | 86 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 32 mm |
| Bearing Type | Angular Ball Bearing |
| Width | 142 mm |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Height | 103 mm |
| Additional Information 2 | with fastening material |
| Outer diameter 1 | 111 mm |
| Number of mounting bores | 8 |
| Outer diameter 2 | 155 mm |
| Type | Fifth Wheel Kingpin |
| Function | Fifth Wheel Kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fifth Wheel Kingpin (104932)
- 8x Febi Screw (03436)
£131.41
Important compatibility info
| Piston conrod diameter | 12.4 mm |
| Min. Length | 287 mm |
| Mounting points diameter | 12 mm |
| Max. Length | 363 mm |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Hole Spacing | 130 mm |
| Placement on Vehicle | Rear Axle |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Placement on Vehicle | Rear Axle |
| for OE number | 1K0 511 409 CA S1 |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Additional Information 2 | with coupling rod |
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174081)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
- 2x Febi Link/Coupling Rod, stabiliser bar (29461)
£131.41
Important compatibility info
| Extra Description | ProKit |
| Adjustable | adjustable |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Colour | Black |
| Heating / Cooling | with jiggle pin |
| Paired article numbers | 179235 |
| Material | Plastic |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Placement on Vehicle | Left |
| Additional Information | with gasket/seal |
| Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Cone Size | 14 mm |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Paired article numbers | 179234 |
| Colour | Black |
| Placement on Vehicle | Right |
| Additional Information | with gasket/seal |
| Extra Description | febi Plus |
| Material | Plastic |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 622 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Function | Brake Drum |
| Type | Brake Drum |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 50 mm |
| Outer diameter | 261 mm |
| Thickness | 74.2 mm |
| Rim Hole Number | 4 -Hole |
| Max.skimmed drum measure | 228.5 mm |
| Centering Diameter | 61.9 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Inner diameter | 228.6 mm |
| Additional Information 2 | with wheel bearing, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.54
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.64
Important compatibility info
| Width | 22 mm |
| Outer diameter | 126 mm |
| Additional Information 2 | with screw |
| Inner diameter | 17 mm |
| Parameter | 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (193956)
- 1x Febi Screw (173360)
£131.66
Important compatibility info
| Surface | Coated |
| Width | 20 mm |
| Type | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Number of Teeth | 163 |
| Belts | with rounded tooth profile |
| Function | Water Pump & Timing Belt Kit |
| Replaces | 172703 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (173327)
- 1x Febi Water Pump, engine cooling (103082)
£131.68
Important compatibility info
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.69
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 104.5 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 52.3 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.76
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.81
Important compatibility info
| Pump Type | Mono Pump |
| Number of Connectors / Ports | 2 |
| Voltage | 24 V |
| for OE number | 1606929 |
| Type | Washer Fluid Pump, headlight cleaning / Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, headlight cleaning / Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.90
Important compatibility info
| Inner diameter 1 | 110 mm |
| Inner diameter 2 | 100 mm |
| Outer diameter 1 | 170 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Wheel Bearing Kit |
| Width 1 | 47 mm |
| Outer diameter 2 | 157 mm |
| Width 2 | 42 mm |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| for OE number | 940 350 03 35 S1 |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Wheel Bearing (23314)
- 1x Febi Wheel Bearing (45806)
£131.90
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring (40687)
- 1x Febi Filter, cabin air (18759)
- 1x Febi Fuel filter (101080)
- 1x Febi Fuel filter (47974)
- 1x Febi Air Filter (30443)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
- 1x Febi Oil Filter (49868)
- 1x Febi Fuel filter (31397)
£131.90
Important compatibility info
| Number of Teeth | 131 |
| Surface | Coated |
| Width | 25 mm |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (23413)
- 1x Febi Water Pump, engine cooling (24194)
£131.94
Important compatibility info
| Number of Ribs | 7 |
| Length | 1190 mm |
| Alternator type | for starter generator |
| Tensile Cord Material | Aramid |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (184952)
- 1x Febi Belt Tensioner, v-ribbed belt (183536)
£131.97
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 472 mm |
| Min. Length | 332 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Replaces | 20056; 20070 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.99
Important compatibility info
| Water pump impeller material | Metal |
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Vehicle Equipment | for vehicles with start-stop function |
| Number of Wings | 9 |
| Additional Information | with gasket/seal |
| Additional Information 2 | switchable water pump |
| Operating Mode | Vacuum-controlled |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.02
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Pressure | 200 bar |
| Type | Fuel Pump / Hydraulic Pump, steering |
| Function | Fuel Pump / Hydraulic Pump, steering |
| for OE number | 003 460 51 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.04
Important compatibility info
| Type | Crankshaft, air compressor |
| Function | Crankshaft, air compressor |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.07
Important compatibility info
| Function | Vacuum Pump, braking system |
| Number of Ribs | 6 |
| Outer diameter | 59 mm |
| Pulleys | with belt pulley |
| Type | Vacuum Pump, braking system |
| Additional Information | without gasket/seal |
| for OE number | 1 689 115 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.10
Important compatibility info
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 702 mm |
| Min. Length | 470 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.13
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 853 mm |
| Min. Length | 515 mm |
| Pipe Diameter | 76 mm. 63.5 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.15
Important compatibility info
| Pipe Diameter | 65 mm. 76 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Min. Length | 481 mm |
| Max. Length | 794 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.15
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber |
| Pipe Diameter | 57 mm. 45 mm |
| Min. Length | 436 mm |
| Max. Length | 735 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.15
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023