Proud to be a UK-based company
Contact us
Important compatibility info
| Height | 83 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.05
Important compatibility info
| Function | Cable Pull, manual transmission |
| Inner length 1 | 722 mm |
| Type | Cable Pull, manual transmission |
| Inner length 2 | 742 mm |
| Outer length 1 | 990 mm |
| Outer length 2 | 1010 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.05
Important compatibility info
| Placement on Vehicle | Centre |
| Type | Solenoid Valve, air suspension |
| Function | Solenoid Valve, air suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.05
Important compatibility info
| Number of Teeth | 27 |
| Number of Wings | 12 |
| Housing material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.05
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Pipe Diameter | 70 mm. 41 mm |
| Min. Length | 217 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 13 mm |
| Max. Length | 279 mm |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.08
Important compatibility info
| for OE number | 14401-RB1-003 S3 |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 132 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49572)
- 1x Febi Guide, timing chain (175061)
- 1x Febi Holder, timing chain slide rail (175068)
- 1x Febi Guide, timing chain (175076)
- 1x Febi Gear/Sprocket, camshaft (175078)
- 1x Febi Sprocket, crankshaft (175065)
- 1x Febi Shaft Seal, camshaft (177678)
£117.19
Important compatibility info
| Number of Holes | 6 |
| Placement on Vehicle | Front |
| Thickness | 12 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.22
Important compatibility info
| Function | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Mounting points diameter | 16 mm |
| Min. Length | 358 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 400 mm |
| Pipe Diameter | 50 mm. 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.30
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 532 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.34
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 48 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.34
Important compatibility info
| Additional Information 2 | with ABS sensor ring |
| Surface | Oiled |
| Brake Disc Thickness | 11 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Minimum thickness | 9.5 mm |
| Centering Diameter | 52 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Thickness | 90 mm |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Outer diameter | 290 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.38
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 70 mm |
| Wheel Sided Joint Diameter | 80.5 mm |
| Min. Length | 819 mm |
| External Teeth, Diff.Side | 26 |
| Thread Size | M24 x 1,5 |
| External Teeth, Wheel Side | 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.41
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 275 mm |
| Min. Length | 233 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.43
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
| for OE number | 03C 115 105 T |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.44
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.44
Important compatibility info
| Number of Chain Links | 144 |
| Timing Chain Size | G53HR |
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Type | Timing Chain Kit |
| Replaces | 30337 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Tensioner, timing chain (29856)
- 1x Febi Guide, timing chain (29533)
- 1x Febi Guide, timing chain (29532)
- 1x Febi Sliding Rail Bolts, timing chain (48336)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Pulley Bolt (48338)
- 1x Febi Sprocket, crankshaft (30458)
£117.51
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Rod/Strut | Guide Rod |
| Steering arm type | Trailing Arm |
| Length | 565 mm |
| Outer diameter | 52 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.53
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Guide Rod |
| Thickness | 103 mm |
| Length | 1500 mm |
| Width | 62 mm |
| Pipe Diameter | 38 mm |
| Internal Thread Size | M30 x 1,5 LHT |
| External Thread Size | M20 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
| Cone Size | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Additional Information | with piston, with piston rod |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 184 mm |
| Thickness | 560 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 33.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Combi Switch Function | Window Regulator, Mirror Adjustment, Heated wing mirror on/off |
| for OE number | 1895 436 |
| Function | Multi-Function Switch |
| Placement on Vehicle | Driver side |
| Type | Multi-Function Switch |
| Number of Connectors / Ports | 21 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| for OE number | ERR2266 |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Extra Description | febi Plus |
| for OE number | 22391563 |
| Function | Dosing Module, urea injection |
| Type | Dosing Module, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Inner length 2 | 770 mm |
| Inner length 1 | 810 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1039 mm |
| Outer length 2 | 1090 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Type | Timing Chain |
| Number of Chain Links | 152 |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Number of Teeth | 48 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 637 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 122 mm |
| Thickness | 60 mm |
| Inner diameter | 40 mm |
| Bolt Hole Circle Diameter | 95 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Steering arm type | Trailing Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle |
| Length | 600 mm |
| Hole Spacing | 50 mm |
| Mounting points diameter | 70 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.55
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.56
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 703 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.56
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 55 mm |
| for OE number | 3140086G00 |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.57
Important compatibility info
| Length | 425 mm |
| Width | 55 mm |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.65
Important compatibility info
| Function | Shock Absorber |
| Type | Shock Absorber |
| Max. Length | 562 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Min. Length | 362 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.75
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 74. 66 |
| Timing Chain Size | G67AM, G67HP, G67HR |
| Chain Type | Simplex, Closed chain |
| Placement on Vehicle | Upper, Lower |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29858)
- 1x Febi Tensioner, timing chain (21291)
- 1x Febi Timing Chain (21267)
- 1x Febi Guide, timing chain (24952)
- 1x Febi Guide, timing chain (24898)
- 1x Febi Guide, timing chain (24829)
- 1x Febi Guide, timing chain (24830)
£117.75
Important compatibility info
| Length | 694 mm. 681 mm |
| Placement on Vehicle | Rear Axle |
| Width | 57 mm |
| Type | Spring Pack |
| Function | Spring Pack |
| Spring Design | Leaf spring |
| Number of spring leaves | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.76
Important compatibility info
| Number of spring leaves | 1 |
| Placement on Vehicle | Rear Axle |
| Width | 57 mm |
| Spring Design | Leaf spring |
| Length | 695 mm. 681 mm |
| Function | Spring Pack |
| Type | Spring Pack |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.78
Important compatibility info
| Outer diameter | 228 mm. 215 mm |
| External Thread Size | M16 x 1,5, M10 x 1,5, M24 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Thickness | 238 mm. 617 mm |
| Additional Information | with piston rod, with piston |
| Placement on Vehicle | non-steered leading axle |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.78
Important compatibility info
| Length | 840 mm |
| Outer diameter | 52.0 mm |
| Rod/Strut | Push Rod |
| Outer thread | M27 x 1,5 mm |
| Driver Position | for left-hand drive vehicles |
| Weight | 9.42 kg |
| Inner thread | M30 x 1,5 RHT mm |
| Cone Size | 32 mm |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
£117.80
Important compatibility info
| Surface | Coated |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 120 |
| Timing Chain Size | G53HS-7 |
| Function | Timing Chain Kit |
| Part number of the recommended special tools | ADK85501 |
| Type | Timing Chain Kit |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (100704)
- 1x Febi Tensioner, timing chain (28458)
- 1x Febi Guide, timing chain (31543)
- 1x Febi Guide, timing chain (31544)
- 1x Febi Sprocket, crankshaft (31545)
- 1x Febi Gear/Sprocket, camshaft (31546)
- 1x Febi Gasket, timing case (32153)
- 1x Febi Shaft Seal, crankshaft (32154)
- 1x Febi Pulley Bolt (47593)
- 1x Febi Oil Hose (49568)
£117.93
Important compatibility info
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Number of Connectors / Ports | 2 |
| Operating Mode | Manual |
| Suction side external thread size | M12 x 1,5 |
| Internal Thread Size | M10 x 1,5 |
| Type | Tilt Pump, driver cab |
| Hole Spacing | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.94
Important compatibility info
| Number of grooves | 9 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Housing material | Aluminium |
| Water pump impeller material | Plastic |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.98
Important compatibility info
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 155 mm. 280 mm |
| Thickness | 155 mm. 605 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.00
Important compatibility info
| Belts | with rounded tooth profile |
| Function | Water Pump & Timing Belt Kit |
| Width | 30 mm |
| Number of Teeth | 120 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 038 198 119 A S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21724)
- 1x Febi Water Pump, engine cooling (38512)
£118.02
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 32 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Outer diameter 2 | 150 mm |
| Outer diameter 1 | 70 mm |
| Function | Wheel Bearing Kit |
| Outer diameter | 92 mm |
| Width | 54 mm |
| Additional Information | with fastening/mounting material |
| Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.04
Important compatibility info
| Function | V-Ribbed Belt Set |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Units / Pulleys | incl. deflection pulley |
| Length 1 | 1342 mm |
| Additional Information | with clamping elements |
| Length 2 | 1526 mm |
| Number of ribs 2 | 8 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (38983)
- 1x Febi V-Ribbed Belt (40707)
- 1x Febi V-Ribbed Belt (34350)
- 2x Febi Belt Tensioner, v-ribbed belt (27117)
£118.04
Important compatibility info
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 140 |
| Chain Type | Simplex, Closed chain |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31005)
- 1x Febi Tensioner, timing chain (109308)
- 1x Febi Guide, timing chain (177812)
- 1x Febi Guide, timing chain (174544)
- 1x Febi Guide, timing chain (174609)
£118.19
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.6 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.19
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Internal Thread Size | M10 x 1,5 |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 60 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.29
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023