Important compatibility info
Material | ACM (Polyacrylate), Metal |
Weight | 0.14 kg |
Type | Gasket, oil sump |
Function | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.500 kg |
Steering arm type | Control Arm |
Paired article numbers | 15695 |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.500 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 15694 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.851 kg |
Type | Parts Set, maintenance service |
Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring (40687)
- 1x Febi Urea Filter (100593)
- 1x Febi Fuel filter (28068)
- 1x Febi Fuel filter (47974)
- 1x Febi Air Filter (30443)
- 1x Febi Oil Filter (45320)
- 1x Febi Filter, cabin air (18759)
- 1x Febi Fuel filter (31397)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
Important compatibility info
Length | 815 mm |
Material | Cast Steel |
Additional Information 2 | with crown nut |
Spanner Size | 17 |
Placement on Vehicle | Front Axle, Centre |
External Thread Size | M12 x 1,25 |
Function | Tie Rod |
Type | Tie Rod |
Pipe Diameter | 32 mm |
Cone Size | 15.8 mm |
Weight | 3.63 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Weight | 0.233 kg |
Type | Steering Column Switch / Switch, engine brake |
Function | Steering Column Switch / Switch, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 934 mm |
Outer diameter | 40 mm |
Rod/Strut | Push Rod |
Cone Size | 30.2 mm |
Pipe Diameter | 52 mm |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Weight | 10.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 12.05 kg |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Placement on Vehicle | Front Axle |
Length | 1315 mm |
Cone Size | 30 mm |
Pipe Diameter | 50 mm |
Type | Tie Rod |
Function | Tie Rod |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M10 x 1,5 |
External Teeth, Wheel Side | 36 |
Weight | 8.765 kg |
External Teeth, Diff.Side | 26 |
Min. Length | 981 mm |
Wheel Sided Joint Diameter | 88 mm |
Transmission-side joint diameter | 93.7 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 1.369 kg |
Placement on Vehicle | Rear |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Weight | 2.405 kg |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Extra Description | febi Plus |
for OE number | 070 103 469 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Rear |
Weight | 3.125 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 12 |
Rated Power | 1.7 kW |
Weight | 3.2 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Function | Repair Kit, suspension strut support mount |
Placement on Vehicle | Front Axle |
Weight | 4.054 kg |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | without ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals |
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Weight | 1.54 kg |
Number of Wings | 8 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Heating / Cooling | for vehicles without oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 11 |
Rated Power | 2.3 kW |
Weight | 3.7 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with piston rod, with piston |
Placement on Vehicle | Rear Axle |
Outer diameter | 228 mm. 184 mm |
Thickness | 560 mm |
Function | Bellow, air suspension |
External Thread Size | M16 x 1,5 |
Weight | 7.5 kg |
Type | Bellow, air suspension |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 268 mm |
Thickness | 73.3 mm |
Brake Disc Thickness | 12 mm |
Minimum thickness | 10 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 65 mm |
Surface | Oiled |
Function | Brake Disc |
Rotor Style | Solid |
Weight | 6.65 kg |
Type | Brake Disc Rotor |
Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Pump |
Number of Teeth | 32 |
Weight | 1.091 kg |
Function | Oil Pump |
Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.192 kg |
Placement on Vehicle | Front Axle |
Length | 1035 mm |
Function | Stabiliser Bar, suspension |
Extra Description | ProKit |
Type | Stabiliser Bar, suspension |
Additional Information 2 | with coupling rod |
Stabiliser Diameter | 23.6 mm |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (45304)
- 4x Febi Fastening Bolt, stabiliser bar (45305)
- 2x Febi Link/Coupling Rod, stabiliser bar (24122)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023