Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with fastening/mounting material |
| Number of Wings | 8 |
| Weight | 3.466 kg |
| Function | Water Pump, engine cooling |
| Material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Cone Size 2 | 25 mm |
| External Thread Size | M14 x 1,5 |
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 181744 |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 10.974 kg |
| Cone Size 1 | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Placement on Vehicle | Front Axle, inner |
| Width | 78 mm |
| Outer diameter | 150 mm |
| Weight | 5.757 kg |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 6.574 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 580 mm |
| Wheel Sided Joint Diameter | 85.5 mm |
| Transmission-side joint diameter | 60.4 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Weight | 2.900 kg |
| Fill Medium | Brake Fluid |
| Type | Clutch Booster |
| Function | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Inner diameter | 193 mm |
| Filter type | Filter Insert |
| Weight | 2.9 kg |
| Type | Air Filter |
| Function | Air Filter |
| Height | 420 mm |
| Outer diameter | 319 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Material | ACM (Polyacrylate), Metal |
| Weight | 0.14 kg |
| Type | Gasket, oil sump |
| Function | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Weight | 1.294 kg |
| Type | Rod/Strut, wheel suspension |
| Rod/Strut | Push Rod |
| Function | Rod/Strut, wheel suspension |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 24008 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Weight | 2.940 kg |
| Length | 537 mm |
| Width | 377 mm |
| Material | PP (Polypropylene) |
| Thickness | 219 mm |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Number of Connectors / Ports | 2 |
| Additional Information 2 | with lid |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Voltage | 24 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Mounting points diameter | 6 mm |
| Function | Coolant Control Valve |
| Weight | 0.478 kg |
| Type | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Number of Connectors / Ports | 2 |
| Operating pressure to | 11 bar |
| Function | Hydraulic Pump, steering |
| for OE number | 2E0 422 145 B |
| Weight | 2.000 kg |
| Type | Hydraulic Pump, steering |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Weight | 6.054 kg |
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Alternator Charge Current | 124 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
| Weight | 1.174 kg |
| for OE number | 03C 115 105 T |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Pulleys | with belt pulley |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Weight | 2.600 kg |
| Type | Hydraulic Pump, steering |
| Operating pressure to | 9 bar |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Width | 63 mm |
| Outer diameter | 159 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Additional Information 2 | with bolts/screws |
| Weight | 3.193 kg |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.50
Important compatibility info
| Weight | 11.700 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Placement on Vehicle | Front Axle |
| Length | 566 mm |
| Steering arm type | Trailing Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.62
Important compatibility info
| Number of Teeth | 119 |
| Weight | 1.343 kg |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (188804)
- 1x Febi Water Pump, engine cooling (36204)
£123.66
Important compatibility info
| Type | Connecting Rod |
| Weight | 3.49 kg |
| for OE number | 51.02400.6044 |
| Function | Connecting Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.73
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 6.6 kg |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.75
Important compatibility info
| Weight | 0.665 kg |
| Length | 110 mm |
| Width | 114 mm |
| Thickness | 100 mm |
| Type | Pump, fuel pre-supply |
| Function | Pump, fuel pre-supply |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.79
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Operating Mode | Electric |
| Paired article numbers | 176514 |
| Weight | 1.441 kg |
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.80
Important compatibility info
| Steering arm type | Trailing Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle |
| Length | 600 mm |
| Weight | 6.970 kg |
| Hole Spacing | 50 mm |
| Mounting points diameter | 70 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.80
Important compatibility info
| Operating Mode | Automatic |
| Width of castor bearing surface | 32 mm |
| Function | Belt Tensioner, V-ribbed belt |
| Outer diameter | 75 mm |
| Material | Metal |
| Type | Belt Tensioner, V-ribbed belt |
| Weight | 1.624 kg |
| Quantity | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.86
Important compatibility info
| Length | 503 mm |
| Height | 46 mm |
| Width | 337 mm |
| Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
| Additional Information 2 | with bolts/screws |
| Filter type | Screen Filter |
| Transmission Type | Automatic Transmission |
| Weight | 1.4 kg |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.87
Important compatibility info
| Weight | 3.89 kg |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear Axle |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 20 mm |
| Max. Length | 427 mm |
| Min. Length | 303 mm |
| Pipe Diameter | 73 mm. 63 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaced by | 20282 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.91
Important compatibility info
| Additional Information | with rubber mounts |
| Weight | 4.68 kg |
| Stabiliser Diameter | 25.4 mm |
| Placement on Vehicle | Front Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171121)
- 2x Febi Link/Coupling Rod, stabiliser bar (24122)
£123.94
Important compatibility info
| Additional Information 2 | with spacer plate |
| Weight | 1.935 kg |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.98
Important compatibility info
| Weight | 1.37 kg |
| Outer diameter | 420 mm |
| Thickness | 74 mm |
| Inner diameter | 10.5 mm |
| Inner diameter 1 | 17.5 mm |
| Number of Wings | 7 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| for OE number | 000 200 97 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.98
Important compatibility info
| Outer diameter | 259 mm. 205 mm |
| Weight | 9.5 kg |
| Placement on Vehicle | Rear Axle |
| Function | Bellow, air suspension |
| Thickness | 510 mm. 138 mm |
| External Thread Size | M24 x 1,5, M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.14
Important compatibility info
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Weight | 11.0 kg |
| Outer diameter | 225 mm. 258 mm |
| Thickness | 262 mm. 628 mm |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle |
| Rolling piston material | Steel |
| Additional Information | with piston rod, with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.16
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.177 kg |
| Cable Length | 2320 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| Placement on Vehicle | Right |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.19
Important compatibility info
| Pipe Diameter | 80 mm. 71 mm |
| Mounting points diameter | 20 mm. 30 mm |
| Weight | 5.76 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Function | Shock Absorber |
| Piston conrod diameter | 17 mm |
| Placement on Vehicle | Rear Axle |
| Min. Length | 428 mm |
| Max. Length | 680 mm |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.23
Important compatibility info
| External Thread Size | M10 x 1 |
| Weight | 3.15 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 702 mm |
| Min. Length | 470 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.23
Important compatibility info
| Weight | 5.0 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Bottom eye, Top eye |
| Max. Length | 700 mm |
| Min. Length | 455 mm |
| Pipe Diameter | 63 mm. 76 mm |
| Mounting points diameter | 20 mm. 16 mm |
| Piston conrod diameter | 19 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.23
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Mounting points diameter | 12 mm. 14 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 659 mm |
| Min. Length | 404 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Weight | 3.345 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20044; 20346 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.23
Important compatibility info
| Function | Shock Absorber |
| Pipe Diameter | 60 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Max. Length | 668 mm |
| Min. Length | 403 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Placement on Vehicle | Rear Axle |
| Weight | 4.0 kg |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.23
Important compatibility info
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Weight | 11.5 kg |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Bolt Hole Circle Diameter | 120 mm |
| Outer diameter | 325 mm |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 27 mm |
| Brake Disc Thickness | 30 mm |
| Thickness | 70 mm |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.24
Important compatibility info
| Number of Teeth | 141 |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Weight | 2.65 kg |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (24756)
- 1x Febi Water Pump, engine cooling (24360)
£124.32
Important compatibility info
| Weight | 1.154 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186663, 186735 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.38
Important compatibility info
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Weight | 1.42 kg |
| Number of Chain Links | 138 |
| Replaces | 47661 |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29534)
- 1x Febi Guide, timing chain (29535)
- 1x Febi Sliding Rail Bolts, timing chain (47398)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Sprocket, crankshaft (30458)
£124.44
Important compatibility info
| Paired article numbers | 186069 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 735 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Right |
| Weight | 7.775 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Weight | 2.785 kg |
| Rotation Direction | Clockwise rotation |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Operating pressure to | 170 bar |
| Type | Hydraulic Pump, steering |
| for OE number | 2 064 855 |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M26 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
| Weight | 0.47 kg |
| Number of screws | 18 |
| for OE number | 51.03905.0177 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Length | 840 mm |
| Outer diameter | 52.0 mm |
| Rod/Strut | Push Rod |
| Outer thread | M27 x 1,5 mm |
| Driver Position | for left-hand drive vehicles |
| Weight | 9.42 kg |
| Inner thread | M30 x 1,5 RHT mm |
| Cone Size | 32 mm |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
£124.48
Important compatibility info
| Weight | 1.099 kg |
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Weight | 1.433 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 22 |
| Rated Power | 1.8 kW |
| Weight | 4.73 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Weight | 1.590 kg |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Weight | 9.44 kg |
| Material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Seal Material | Paper, Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Cone Size | 30 mm |
| Additional Information 2 | with crown nut |
| Width | 120 mm |
| Height | 120 mm |
| Length | 520 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Diameter 1 | 60 mm |
| Type | Centre Rod Assembly |
| Weight | 8.000 kg |
| Adjustable | Adjustable |
| Function | Centre Rod Assembly |
| Rod/Strut | Pressure Rod |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023