Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Alternator Charge Current | 105 A |
| Belt Pulley Diameter | 78 mm |
| Current Strength | 105 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 110 A |
| Belt Pulley Diameter | 47 mm |
| Current Strength | 110 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 93.5 mm |
| Wheel Sided Joint Diameter | 102.8 mm |
| External Teeth, Diff.Side | 28 |
| Min. Length | 1028 mm |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 725 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Colour | Black |
| Extra Description | febi Plus |
| Type | Fitting, intake manifold |
| Additional Information | with gaskets/seals |
| Material | Plastic |
| Function | Fitting, intake manifold |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.45
Important compatibility info
| Material | Plastic |
| Additional Information 2 | without sensor |
| Colour | Black |
| Number of Connectors / Ports | 4. 6 |
| Extra Description | febi Plus |
| Function | Clock Spring, airbag |
| Type | Clock Spring, airbag |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.46
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 239 |
| Width | 25.4 mm |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14640)
- 1x Febi Water Pump, engine cooling (18896)
£128.50
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Outer diameter | 139.9 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Bolt Hole Circle Diameter | 114.3 mm |
| Width | 140 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.52
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information | with lock nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 62 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.58
Important compatibility info
| Number of Wings | 6 |
| Housing material | Cast Aluminium |
| Seal Material | Rubber |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.73
Important compatibility info
| for OE number | 03F 145 140 D S1 |
| Additional Information | with fastening/mounting material |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.05
Important compatibility info
| for OE number | 03F 145 140 E S1 |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.05
Important compatibility info
| Number of Connectors / Ports | 2. 4 |
| Type | Control Unit, electric fan (engine cooling) |
| Function | Control Unit, electric fan (engine cooling) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.08
Important compatibility info
| Additional Information 2 | with spacer plate |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.22
Important compatibility info
| Voltage | 12 V |
| Function | Alternator |
| Type | Alternator |
| Belt Pulley Diameter | 76 mm |
| Number of Ribs | 2 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.26
Important compatibility info
| Bolt Hole Circle Diameter | 90 mm |
| Type | Vibration Absorber, propshaft |
| Function | Vibration Absorber, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Vibration Absorber, propshaft (10643)
- 3x Febi Screw (03931)
- 3x Febi Screw (09110)
- 1x Febi Assembly Kit, propshaft joint (22117)
£129.30
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 6 |
| Type | Throttle body |
| Function | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.37
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber |
| Pipe Diameter | 57 mm. 45 mm |
| Min. Length | 436 mm |
| Max. Length | 735 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.37
Important compatibility info
| Additional Information 2 | with gear |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.39
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023