Important compatibility info
Additional Information | with fastening/mounting material |
Number of Wings | 8 |
Weight | 3.466 kg |
Function | Water Pump, engine cooling |
Material | Grey Cast Iron |
Water pump impeller material | Grey Cast Iron |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing |
Placement on Vehicle | Front Axle |
Width | 115 mm |
Outer diameter | 127 mm |
Inner diameter | 68 mm |
Weight | 6.2 kg |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 9.51 kg |
Material | Grey Cast Iron |
Number of Wings | 9 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Seal Material | Rubber |
Internal Thread Size | M10 x 1,5 |
Additional Information | with gaskets/seals |
for OE number | 906 200 60 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 63 mm |
Outer diameter | 159 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Additional Information 2 | with bolts/screws |
Weight | 3.193 kg |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 11.700 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Hole Spacing | 130 mm |
Placement on Vehicle | Front Axle |
Length | 566 mm |
Steering arm type | Trailing Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Connecting Rod |
Weight | 3.49 kg |
for OE number | 51.02400.6044 |
Function | Connecting Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.665 kg |
Length | 110 mm |
Width | 114 mm |
Thickness | 100 mm |
Type | Pump, fuel pre-supply |
Function | Pump, fuel pre-supply |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Trailing Arm |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle |
Length | 600 mm |
Weight | 6.970 kg |
Hole Spacing | 50 mm |
Mounting points diameter | 70 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Operating Mode | Electric |
Paired article numbers | 176514 |
Weight | 1.441 kg |
Placement on Vehicle | Right Front |
Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Width of castor bearing surface | 32 mm |
Function | Belt Tensioner, V-ribbed belt |
Outer diameter | 75 mm |
Material | Metal |
Type | Belt Tensioner, V-ribbed belt |
Weight | 1.624 kg |
Quantity | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 503 mm |
Height | 46 mm |
Width | 337 mm |
Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
Additional Information 2 | with bolts/screws |
Filter type | Screen Filter |
Transmission Type | Automatic Transmission |
Weight | 1.4 kg |
Type | Hydraulic Filter, automatic transmission |
Function | Hydraulic Filter, automatic transmission |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.89 kg |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Placement on Vehicle | Rear Axle |
Mounting points diameter | 24 mm |
Piston conrod diameter | 20 mm |
Max. Length | 427 mm |
Min. Length | 303 mm |
Pipe Diameter | 73 mm. 63 mm |
Function | Shock Absorber |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Replaced by | 20282 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Weight | 4.68 kg |
Stabiliser Diameter | 25.4 mm |
Placement on Vehicle | Front Axle |
Type | Stabiliser Bar, suspension |
Function | Stabiliser Bar, suspension |
Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171121)
- 2x Febi Link/Coupling Rod, stabiliser bar (24122)
Important compatibility info
Placement on Vehicle | Right |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Aluminium |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 2.0 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.37 kg |
Outer diameter | 420 mm |
Thickness | 74 mm |
Inner diameter | 10.5 mm |
Inner diameter 1 | 17.5 mm |
Number of Wings | 7 |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
for OE number | 000 200 97 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with spacer plate |
Weight | 1.935 kg |
Type | Cylinder Head, air compressor |
Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 259 mm. 205 mm |
Weight | 9.5 kg |
Placement on Vehicle | Rear Axle |
Function | Bellow, air suspension |
Thickness | 510 mm. 138 mm |
External Thread Size | M24 x 1,5, M16 x 1,5, M10 x 1,5 |
Type | Bellow, air suspension |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, air suspension |
Type | Bellow, air suspension |
Weight | 11.0 kg |
Outer diameter | 225 mm. 258 mm |
Thickness | 262 mm. 628 mm |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle |
Rolling piston material | Steel |
Additional Information | with piston rod, with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.177 kg |
Cable Length | 2320 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Diagnostic Probe |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
Placement on Vehicle | Right |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 80 mm. 71 mm |
Mounting points diameter | 20 mm. 30 mm |
Weight | 5.76 kg |
Shock Absorber Design | Telescopic Shock Absorber |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Shock Absorber Type | Oil Pressure |
Function | Shock Absorber |
Piston conrod diameter | 17 mm |
Placement on Vehicle | Rear Axle |
Min. Length | 428 mm |
Max. Length | 680 mm |
Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023