Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Pulleys | with belt pulley |
| Length | 205 mm |
| Height | 145 mm |
| Width | 247 mm |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40342 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (14522)
- 2x Febi Camber Correction Screw (07758)
- 1x Febi Bolt, control arm (11154)
- 1x Febi Nut, exhaust manifold (01554)
- 1x Febi Nut (06877)
- 1x Febi Nut (22263)
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 90. 70 |
| Function | Timing Chain Kit |
| Timing Chain Size | G68WN, G68V |
| Type | Timing Chain Kit |
| for OE number | 021 109 503 D S1 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25364)
- 1x Febi Chain, intermediate shaft (09585)
- 1x Febi Guide, timing chain (25182)
- 1x Febi Guide, timing chain (25222)
- 1x Febi Guide, timing chain (25220)
- 1x Febi Tensioner, timing chain (25240)
- 1x Febi Tensioner, timing chain (25238)
Important compatibility info
| Additional Information | with lock nut, with rubber mounts |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40164 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (33523)
- 1x Febi Nut (40161)
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40163 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (33524)
- 1x Febi Nut (40161)
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
| for OE number | 1715 681 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
| Belt Pulley Diameter | 55 mm |
| Alternator Charge Current | 120 A |
| Pulleys | with belt pulley |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter 1 | 110 mm |
| Inner diameter 2 | 100 mm |
| Outer diameter 1 | 170 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Wheel Bearing Kit |
| Width 1 | 47 mm |
| Outer diameter 2 | 157 mm |
| Width 2 | 42 mm |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| for OE number | 940 350 03 35 S1 |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Wheel Bearing (23314)
- 1x Febi Wheel Bearing (45806)
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with bolts, with seal ring |
| for OE number | 5 0036 2859 |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size 1 | 20 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Cone Size 2 | 25 mm |
| External Thread Size | M14 x 1,5 |
| Material | Cast Steel |
| Paired article numbers | 181746 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| for OE number | 070 103 469 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 |
| Function | Alternator |
| Alternator Charge Current | 75 A |
| Pulleys | with belt pulley |
| Voltage | 12 V |
| Type | Alternator |
| Belt Pulley Diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 646 mm |
| Min. Length | 411 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20436 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1666 mm |
| Cone Size | 22 mm |
| Pipe Diameter | 42 mm |
| External Thread Size | M18 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Black |
| Extra Description | febi Plus |
| Type | Fitting, intake manifold |
| Additional Information | with gaskets/seals |
| Material | Plastic |
| Function | Fitting, intake manifold |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Type | Repair Kit, driver cab suspension |
| Function | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Hydraulic Pump, steering |
| Operating pressure to | 8 bar |
| Function | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
| Pulleys | with belt pulley |
| Operating Mode | Hydraulic |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















