Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Hydraulic Pump, steering |
| Operating pressure to | 8 bar |
| Function | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
| Pulleys | with belt pulley |
| Operating Mode | Hydraulic |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.82
Important compatibility info
| Type | Solenoid Valve, air suspension |
| Function | Solenoid Valve, air suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.82
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 11 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 51.06500.6515 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.84
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | both sides |
| Internal Thread Size | M16 x 1,5, M18 x 1,5 |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 960 241 63 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.88
Important compatibility info
| Hole Spacing | 70 mm |
| Suction side external thread size | M12 x 1,5 |
| Internal Thread Size | M10 x 1,5 |
| Operating Mode | Manual |
| Number of Connectors / Ports | 3 |
| Function | Tilt Pump, driver cab |
| Type | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.94
Important compatibility info
| Type | Oil Pump |
| Number of Teeth | 32 |
| Function | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.94
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Placement on Vehicle | Rear Axle Left, Front Axle Right |
| Length | 470 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188118 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 434 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.94
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Placement on Vehicle | Rear Axle Right, Front Axle Left |
| Length | 470 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188117 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 434 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.94
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Length | 452 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188174 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 415 mm |
| Placement on Vehicle | Front Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.94
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Length | 452 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188173 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 415 mm |
| Placement on Vehicle | Front Axle Right, Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.94
Important compatibility info
| Placement on Vehicle | Front Axle |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 155 mm |
| Outer diameter | 330 mm |
| Thickness | 144 mm |
| Centering Diameter | 133 mm |
| Surface | Coated |
| Number of mounting bores | 8 |
| Function | Brake Disc |
| Type | Brake Disc |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.99
Important compatibility info
| Number of mounting bores | 4 |
| Bolt Hole Circle Diameter | 110.5 mm |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 538 mm |
| Wheel Sided Joint Diameter | 88.90 mm |
| Transmission-side joint diameter | 79 mm |
| Bore Diameter | 10.9 mm |
| External Teeth, Wheel Side | 28 |
| Function | Drive Shaft |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.99
Important compatibility info
| Length | 479 mm |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Height | 169 mm |
| Width | 296 mm |
| Material | Plastic |
| Colour | Black |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.99
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 460 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1035 mm |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
| Stabiliser Diameter | 23.6 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (45304)
- 4x Febi Fastening Bolt, stabiliser bar (45305)
- 2x Febi Link/Coupling Rod, stabiliser bar (24122)
£123.07
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Thickness | 550 mm. 350 mm |
| Outer diameter | 227 mm. 240 mm |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.08
Important compatibility info
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| External Thread Size | M10 x 1,5, M22 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Placement on Vehicle | non-steered trailing axle |
| Outer diameter | 258 mm. 227 mm |
| Thickness | 290 mm. 500 mm |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.16
Important compatibility info
| Type | Timing Chain Kit |
| Number of Chain Links | 132 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain Kit |
| for OE number | 14401-RB1-003 S1 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49572)
- 1x Febi Holder, timing chain slide rail (175068)
- 1x Febi Guide, timing chain (175061)
- 1x Febi Guide, timing chain (175076)
£123.24
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Bore Diameter | 14 mm |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Mounting bores distance | 83 mm |
| Shock Absorber System | Twin-Tube |
| Min. Length | 340 mm |
| Max. Length | 515 mm |
| Pipe Diameter | 58 mm |
| Piston conrod diameter | 28 mm |
| Function | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.24
Important compatibility info
| Screw length below head | 479 mm |
| Number of Connectors / Ports | 2 |
| Function | Sender Unit, fuel tank |
| Type | Sender Unit, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.26
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023