Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Wings | 5 |
| Housing material | Cast Aluminium |
| Water pump impeller material | Metal |
| Seal Material | Metal |
| Function | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.66
Important compatibility info
| Function | Alternator |
| for OE number | 5705.AA |
| Type | Alternator |
| Belt Pulley Diameter | 54 mm |
| Alternator Charge Current | 150 A |
| Pulleys | with belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.95
Important compatibility info
| for OE number | 21789671 |
| Inner Length | 2921 mm |
| Outer Length | 3310 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.95
Important compatibility info
| Outer diameter | 44 mm |
| Additional Information 2 | with Temperature Switch |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Function | Thermostat, coolant |
| Housing Type | with housing |
| Opening Temperature | 105 °C |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.95
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.04
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Stabiliser Diameter | 25.5 mm |
| Additional Information | with rubber mounts |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171018)
- 2x Febi Link/Coupling Rod, stabiliser bar (36043)
- 4x Febi Nut, stabiliser bar (22264)
- 4x Febi Screw (45756)
£127.05
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 168 |
| for OE number | 16 06 305 S2 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (28375)
- 1x Febi Water Pump, engine cooling (17283)
£127.13
Important compatibility info
| Internal Thread Size | M38 x 1,5 LHT |
| Type | Centre Rod Assembly |
| Cone Size | 30 mm |
| Extra Description | ProKit |
| Pipe Diameter | 62 mm |
| Additional Information | with nuts |
| External Thread Size | M24 x 1,5 |
| Function | Centre Rod Assembly |
| Width | 40 mm |
| Length | 884 mm |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Thickness | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.20
Important compatibility info
| Hole Spacing | 152 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 575 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Bearing/Mounting Type | Molecular Bearing |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.24
Important compatibility info
| Core Depth | 26 mm |
| Core Width | 142 mm |
| Function | Heat Exchanger, interior heating |
| Type | Heat Exchanger, interior heating |
| Core Length | 205 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.24
Important compatibility info
| Pipe Diameter | 70 mm. 75 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 532 mm |
| Min. Length | 335 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.26
Important compatibility info
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Thickness | 63.1 mm |
| Outer diameter | 345 mm |
| Placement on Vehicle | Rear Axle |
| Minimum thickness | 22.4 mm |
| Brake Disc Thickness | 24 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.28
Important compatibility info
| for OE number | 23897048 |
| Function | Accelerator Pedal |
| Type | Accelerator Pedal |
| Operating Mode | Electronic |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.38
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.39
Important compatibility info
| Pulleys | with belt pulley |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Type | Hydraulic Pump, steering |
| Operating pressure to | 9 bar |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.41
Important compatibility info
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 457 200 29 01 S1 |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.44
Important compatibility info
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| External Thread Size | M10 x 1,5, M22 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Placement on Vehicle | non-steered trailing axle |
| Outer diameter | 258 mm. 227 mm |
| Thickness | 290 mm. 500 mm |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.44
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 059 906 461 Q |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.44
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 21 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Paired article numbers | 185906 |
| Cone Size 2 | 28 mm |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.44
Important compatibility info
| Number of Connectors / Ports | 2. 4 |
| Type | Control Unit, electric fan (engine cooling) |
| Function | Control Unit, electric fan (engine cooling) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.44
Important compatibility info
| Width | 23 mm |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 148 |
| Surface | PTFE (Polytetrafluorethylene) coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (30586)
- 1x Febi Water Pump, engine cooling (24358)
£127.45
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 52.5 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented, two-piece brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.46
Important compatibility info
| External Thread Size | M14 x 2 |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 42147 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.57
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 595 mm |
| Min. Length | 380 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.62
Important compatibility info
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 273 mm. 230 mm |
| Thickness | 167 mm. 527 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.62
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm, Triangular Control Arm (CV) |
| Paired article numbers | 182236 |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.67
Important compatibility info
| Steering arm type | Trailing Arm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | both sides |
| Length | 625 mm |
| Hole Spacing | 115 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.68
Important compatibility info
| Function | Repair Set, propshaft centre bearing |
| Bearing Type | Cylindrical Roller Bearing |
| Inner diameter | 30 mm |
| Width | 20 mm |
| Type | Repair Set, propshaft centre bearing |
| Hole Spacing | 68 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (38548)
- 1x Febi Boot, propshaft (100491)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38758)
£127.70
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 52 mm |
| Additional Information 2 | with crown nut |
| Outer diameter | 52 mm |
| Length | 1512 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M35 x 1,5 LHT |
| External Thread Size | M20 x 1,5 |
| Cone Size | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.74
Important compatibility info
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm |
| Rod/Strut | Coupling Rod |
| Cone Size | 38 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.74
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023