Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 4.41 kg |
| Width | 78 mm |
| Outer diameter | 217 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Pressure | 200 bar |
| Type | Fuel Pump / Hydraulic Pump, steering |
| Function | Fuel Pump / Hydraulic Pump, steering |
| Weight | 2.78 kg |
| for OE number | 003 460 51 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Weight | 2.5 kg |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 3.720 kg |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.51
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
| Inner diameter | 18 mm |
| Operating Mode | Hydraulic |
| Weight | 1.1405 kg |
| Rotation Direction | Clockwise rotation |
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.70
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front Axle Right |
| Length | 470 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188118 |
| Weight | 4.0 kg |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 434 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.82
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Front Axle Left |
| Length | 470 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188117 |
| Weight | 4.0 kg |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 434 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.82
Important compatibility info
| Length | 452 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188174 |
| Weight | 4.0 kg |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 415 mm |
| Placement on Vehicle | Front Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.82
Important compatibility info
| Length | 452 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188173 |
| Weight | 4.0 kg |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 415 mm |
| Placement on Vehicle | Front Axle Right, Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.82
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Weight | 1.459 kg |
| Inner diameter | 28 mm |
| Outer diameter | 158 mm |
| Width | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.90
Important compatibility info
| Weight | 1.020 kg |
| Function | Hydraulic Hose, steering |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.93
Important compatibility info
| Weight | 10.7 kg |
| Placement on Vehicle | Rear Axle |
| Length | 510 mm |
| Steering arm type | Trailing Arm |
| Adjustable | Adjustable on both sides |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.97
Important compatibility info
| Weight | 4.87 kg |
| Placement on Vehicle | Steering arm side |
| Function | Repair Kit, kingpin |
| Extra Description | febi Plus |
| Type | Repair Kit, kingpin |
| Paired article numbers | 198303 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.97
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Weight | 5.8 kg |
| Function | Bellow, air suspension |
| Thickness | 550 mm. 350 mm |
| Outer diameter | 227 mm. 240 mm |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.97
Important compatibility info
| Function | Starter |
| Rated Power | 2.0 kW |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Type | Starter |
| Weight | 5.61 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.98
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.500 kg |
| Type | Mounting, engine |
| for OE number | 222 240 61 00 |
| Hole Spacing | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.02
Important compatibility info
| Placement on Vehicle | Front Axle |
| Cone Size | 30 mm |
| Pipe Diameter | 60 mm |
| Length | 1686 mm |
| Rod/Strut | Guide Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Replaces | 39596 |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Type | Tie Rod |
| Weight | 16.55 kg |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.06
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 5.9 kg |
| Function | Brake Drum |
| Placement on Vehicle | Rear Axle |
| Width | 42.8 mm |
| Outer diameter | 245 mm |
| Thickness | 71.5 mm |
| Centering Diameter | 49.4 mm |
| Additional Information 2 | with wheel bearing |
| Inner diameter | 203 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Max.skimmed drum measure | 204.5 mm |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.16
Important compatibility info
| Weight | 4.200 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.22
Important compatibility info
| Weight | 1.585 kg |
| Bolt Hole Circle Diameter | 90 mm |
| Type | Vibration Damper, propshaft |
| Function | Vibration Damper, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Vibration Damper, propshaft (10643)
- 3x Febi Screw (03931)
- 3x Febi Screw (09110)
- 1x Febi Assembly Kit, propshaft joint (22117)
£129.22
Important compatibility info
| Outer diameter | 300 mm |
| Thickness | 84.7 mm |
| Placement on Vehicle | Rear Axle |
| Function | Brake Disc |
| Centering Diameter | 52.3 mm |
| Weight | 7.54 kg |
| Minimum thickness | 9.5 mm |
| Additional Information 2 | with ABS sensor ring |
| Bolt Hole Circle Diameter | 108 mm |
| Rim Hole Number | 5 -Hole |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 11 mm |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.23
Important compatibility info
| Cone Size 1 | 20 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 10.974 kg |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Cone Size 2 | 25 mm |
| External Thread Size | M14 x 1,5 |
| Material | Cast Steel |
| Paired article numbers | 181746 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.23
Important compatibility info
| Function | Starter |
| Rated Power | 2 kW |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Weight | 4.68 kg |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.30
Important compatibility info
| Weight | 0.88 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 6 |
| Type | Throttle body |
| Function | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.37
Important compatibility info
| Weight | 2.46 kg |
| Width | 46 mm |
| Outer diameter | 144 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (30171)
- 4x Febi Pulley Bolt (33822)
£129.39
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Outer diameter | 241 mm. 257 mm |
| Thickness | 690 mm. 275 mm |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Weight | 7.0 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.40
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Paired article numbers | 182353 |
| Colour | Silver |
| Weight | 4.5 kg |
| Type | Brake Caliper |
| Brake caliper piston diameter | 46 mm |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.42
Important compatibility info
| Weight | 4.5 kg |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Paired article numbers | 182352 |
| Colour | Silver |
| Function | Brake Caliper |
| Brake caliper piston diameter | 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.42
Important compatibility info
| Placement on Vehicle | transmission sided |
| Weight | 3.131 kg |
| Type | Repair Kit, flywheel |
| Function | Repair Kit, flywheel |
| Screw length below head | 107 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 12x Febi Flywheel Bolt (44542)
- 1x Febi Shaft Seal, crankshaft (45413)
- 1x Febi Pilot Bearing, clutch (19139)
£129.43
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 640 mm |
| Material | Steel |
| Steering arm type | Control Arm |
| Bore Diameter | 16.5 mm |
| Weight | 7.200 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 111 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.43
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 50 mm |
| Weight | 6.5 kg |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.43
Important compatibility info
| Weight | 10.422 kg |
| Cone Size | 30 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Thread Size | M24 x 1,5 |
| Placement on Vehicle | Front Axle |
| Pipe Diameter | 44 mm |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Additional Information | with nuts |
| Brake Type | Drum Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.43
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Housing, fuel filter |
| Additional Information 2 | with pressure sensor |
| Housing material | Aluminium |
| Weight | 1.620 kg |
| Type | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Housing, fuel filter (179567)
- 1x Febi Sensor, oil pressure (100939)
£129.43
Important compatibility info
| Weight | 2.044 kg |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.43
Important compatibility info
| Number of Ribs | 8 |
| Weight | 3.321 kg |
| Length | 1920 mm |
| Function | V-Ribbed Belt Set |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Units / Pulleys | incl. deflection pulley |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Deflection Rollers | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Deflection/Guide Pulley, v-ribbed belt (30389)
- 1x Febi Belt Tensioner, v-ribbed belt (27135)
- 1x Febi V-Ribbed Belt (34136)
£129.43
Important compatibility info
| Pulleys | with belt pulley |
| Function | Alternator |
| Weight | 6.818 kg |
| Voltage | 12 V |
| Number of Ribs | 7 |
| Type | Alternator |
| Belt Pulley Diameter | 49 mm |
| Alternator Charge Current | 150 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.43
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Weight | 1.226 kg |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.43
Important compatibility info
| External Teeth, Diff.Side | 26 |
| External Teeth, Wheel Side | 25 |
| Weight | 6.138 kg |
| Min. Length | 642 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.43
Important compatibility info
| Thickness | 66 mm |
| Weight | 16.8 kg |
| Placement on Vehicle | Front Axle Left |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| Surface | Coated |
| Paired article numbers | 175490 |
| Centering Diameter | 67 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Brake Disc Thickness | 36 mm |
| Outer diameter | 374 mm |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.51
Important compatibility info
| Type | Mounting, engine |
| for OE number | 2 433 354 |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 2.775 kg |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.56
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 239 |
| Weight | 1.579 kg |
| Width | 25.4 mm |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14640)
- 1x Febi Water Pump, engine cooling (18896)
£129.61
Important compatibility info
| Max. Length | 764 mm |
| Function | Shock Absorber |
| Weight | 4.5 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Mounting points diameter | 16 mm |
| Pipe Diameter | 55 mm. 63.5 mm |
| Min. Length | 464 mm |
| Placement on Vehicle | Rear Axle |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.70
Important compatibility info
| Length | 580 mm |
| Material | Steel |
| Outer diameter | 396 mm |
| Number of Connectors / Ports | 4 |
| Weight | 13.900 kg |
| Capacity | 60 l |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Operating Pressure | 10 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.79
Important compatibility info
| Weight | 1.29 kg |
| Chain Type | Simplex, Closed chain |
| Function | Oil Pump |
| Type | Oil Pump |
| for OE number | 06A 115 105 B S2 |
| Additional Information | with chain tensioner |
| Timing Chain Size | G62 |
| Number of Chain Links | 50 |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33636)
- 1x Febi Chain Tensioner, oil pump drive (33693)
- 1x Febi Oil Pump (22204)
£130.06
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 11.43 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 338 mm |
| Thickness | 73.2 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.12
Important compatibility info
| Width | 26 mm |
| Number of Teeth | 141 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Surface | Coated |
| Weight | 2.15 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (34124)
- 1x Febi Water Pump, engine cooling (22206)
£130.15
Important compatibility info
| Pipe Diameter | 70 mm. 75 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 532 mm |
| Min. Length | 335 mm |
| Type | Shock Absorber |
| Weight | 5.34 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.17
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 5.870 kg |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.17
Important compatibility info
| Piston conrod diameter | 17 mm |
| Min. Length | 351 mm |
| Max. Length | 541 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber |
| Pipe Diameter | 82 mm. 72 mm |
| Replaces | 20107 |
| Weight | 4.78 kg |
| Mounting points diameter | 24 mm |
| Type | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.17
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 654 mm |
| Min. Length | 408 mm |
| Pipe Diameter | 80 mm. 71 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| Weight | 6.65 kg |
| Replaces | 20225 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.17
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023