Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 86.0 mm |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 7.478 kg |
| External Teeth, Diff.Side | 29 |
| Min. Length | 804 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Material | Grey Cast Iron |
| Weight | 10.33 kg |
| Seal Material | Rubber |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 65 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.41
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 6.83 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.45
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Length | 413 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 35 mm |
| Mounting points diameter | 15 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.0 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.50
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 61 mm |
| Outer diameter | 74 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Weight | 3.065 kg |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.63
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Weight | 8.5 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 226 mm. 150 mm |
| Thickness | 205 mm. 640 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.64
Important compatibility info
| Thread Size | M24x1,5 |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 92.3 mm |
| Paired article numbers | 183832 |
| Weight | 7.836 kg |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with axle nut |
| Min. Length | 610 mm |
| ABS Ring Diameter | 97 mm |
| External Teeth, Diff.Side | 30 |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 92.3 mm |
| External Teeth, Wheel Side | 31 |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.70
Important compatibility info
| Weight | 1.94 kg |
| Additional Information 2 | with lid |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.85
Important compatibility info
| Weight | 0.68 kg |
| Height | 100 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Function | Throttle body |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.87
Important compatibility info
| Weight | 0.31 kg |
| Type | Repair Set, retarder |
| Function | Repair Set, retarder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.89
Important compatibility info
| for OE number | 11 12 7 588 412 |
| Weight | 2.122 kg |
| Material | Plastic |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.91
Important compatibility info
| Voltage | 12 V |
| Function | Throttle body |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| for OE number | 03F 133 062 B |
| Weight | 0.847 kg |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.93
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197341 |
| Number of Connectors / Ports | 2. 5 |
| Weight | 1.5 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.13
Important compatibility info
| Placement on Vehicle | Right Front |
| Weight | 1.245 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.19
Important compatibility info
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Weight | 0.738 kg |
| Paired article numbers | 178916 |
| Additional Information 2 | without screw |
| Placement on Vehicle | Exhaust Side |
| Number of Teeth | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.20
Important compatibility info
| Number of Teeth | 36 |
| Placement on Vehicle | Intake Side |
| Additional Information 2 | without screw |
| Paired article numbers | 177847 |
| Weight | 0.610 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.20
Important compatibility info
| Weight | 2.885 kg |
| Width | 60 mm |
| Outer diameter | 172 mm |
| Inner diameter | 40 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.32
Important compatibility info
| Pulleys | with belt pulley |
| Alternator Charge Current | 105 A |
| Voltage | 12 V |
| Weight | 6.57 kg |
| Function | Alternator |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Weight | 13.32 kg |
| Placement on Vehicle | Front Axle |
| Length | 1645 mm |
| Width | 62 mm |
| Cone Size | 30 mm |
| Extra Description | ProKit |
| Type | Tie Rod |
| Function | Tie Rod |
| Pipe Diameter | 48 mm |
| Rod/Strut | Guide Rod |
| Thickness | 115 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Length | 108 mm |
| Height | 78 mm |
| Width | 117 mm |
| Type | Housing, fuel filter |
| Function | Housing, fuel filter |
| Weight | 0.546 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023