Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Length | 413 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 35 mm |
| Mounting points diameter | 15 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Bore Diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Length | 667 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 16 mm |
| Additional Information | with oil, with oil filter, with oil drain plug |
| Number of Teeth | 116 |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (100325)
- 1x Febi Oil Filter (109139)
- 1x Febi Screw Plug, oil sump (48907)
- 1x Febi Engine Oil (108352)
Important compatibility info
| Function | Ignition Coil |
| Ignition Coil | 4 Spark |
| Number of Connectors / Ports | 7 |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Driver side |
| Function | Repair Kit, kingpin |
| Extra Description | febi Plus |
| Type | Repair Kit, kingpin |
| Paired article numbers | 198303 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 22 |
| Combi Switch Function | with indicator function, with wipe-wash function, with hazard warning light function, with high beam function, with headlight flasher, with light dimmer function, with wipe interval function |
| for OE number | 001 540 47 45 |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
| Vehicle Equipment 2 | for vehicles without parking light control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 881 mm |
| Min. Length | 528 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 67 mm |
| Current Strength | 70 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Housing, fuel filter |
| Additional Information 2 | with pressure sensor |
| Housing material | Aluminium |
| Type | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Housing, fuel filter (179567)
- 1x Febi Sensor, oil pressure (100939)
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 50 mm |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with axle nut |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Paired article numbers | 183634 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 28 |
| Min. Length | 586 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cylinder Head Cover |
| for OE number | 651 010 08 30 |
| Function | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| Additional Information | with gasket/seal |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 8 |
| Length | 1920 mm |
| Function | V-Ribbed Belt Set |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Units / Pulleys | incl. deflection pulley |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Deflection Rollers | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Deflection/Guide Pulley, v-ribbed belt (30389)
- 1x Febi Belt Tensioner, v-ribbed belt (27135)
- 1x Febi V-Ribbed Belt (34136)
Important compatibility info
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 168 |
| for OE number | 71771580 |
| Belts | with trapezoidal tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (10982)
- 1x Febi Tensioner Pulley, timing belt (11552)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (10649)
- 1x Febi Water Pump, engine cooling (10599)
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Pressure | 200 bar |
| Type | Fuel Pump / Hydraulic Pump, steering |
| Function | Fuel Pump / Hydraulic Pump, steering |
| for OE number | 003 460 51 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Front Axle |
| Outer diameter | 226 mm. 150 mm |
| Thickness | 205 mm. 640 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Expansion Tank, coolant |
| Additional Information 2 | with lid |
| Opening Pressure | 1.3 bar |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Voltage | 12 V |
| Height | 84 mm |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Throttle Body (100768)
- 1x Febi Gasket, throttle body (103796)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















