Proud to be a UK-based company
Contact us
Important compatibility info
| Pulleys | with belt pulley |
| Alternator Charge Current | 105 A |
| Voltage | 12 V |
| Weight | 6.57 kg |
| Function | Alternator |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Length | 108 mm |
| Height | 78 mm |
| Width | 117 mm |
| Type | Housing, fuel filter |
| Function | Housing, fuel filter |
| Weight | 0.546 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 29 mm |
| Bolt Hole Circle Diameter | 64 mm |
| Outer diameter | 136 mm |
| Thickness | 90 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 3.800 kg |
| Width | 136 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Type | Alternator |
| Alternator Charge Current | 150 A |
| Pulleys | with belt pulley |
| Function | Alternator |
| Belt Pulley Diameter | 54 mm |
| Weight | 7.2 kg |
| for OE number | 5705.GC |
| Voltage | 12 V |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Pipe Diameter | 58.5 mm |
| Mounting points diameter | 21 mm |
| Hole Spacing | 152 mm |
| Rod/Strut | Guide Rod |
| Steering arm type | Trailing Arm |
| Inner diameter | 21 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 629 mm |
| Weight | 15.76 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.37
Important compatibility info
| Material | PA (polyamide) |
| Function | Cylinder Head Cover |
| Weight | 3.090 kg |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.39
Important compatibility info
| Function | Mounting, automatic transmission |
| Placement on Vehicle | Left |
| Weight | 4.242 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.49
Important compatibility info
| Placement on Vehicle | Right |
| Height | 150 mm |
| Width | 400 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193027 |
| Port / Connector type | ASS4 7 Pin |
| Number of Connectors / Ports | 6 |
| Light Function | with indicator, with stop light, with reverse light, with rear fog light, with reflector (triangular), with side marker light, with taillight (LED), without number plate light |
| Weight | 1.3 kg |
| Depth | 120 mm |
| Protection Type (IP Code) | IP56K |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R10, R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.58
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | slotted/perforated, internally vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 73.2 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Weight | 11.6 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.59
Important compatibility info
| Weight | 17.8 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 571 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.63
Important compatibility info
| Additional Information 2 | with valves |
| Additional Information | with gaskets/seals |
| Weight | 1.049 kg |
| Type | Bearing Bracket, camshaft |
| Function | Bearing Bracket, camshaft |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bearing Bracket, camshaft (171970)
- 1x Febi Control Valve, camshaft adjustment (40201)
- 1x Febi Central Magnet, camshaft adjustment (40198)
- 1x Febi Gasket, timing case cover (171570)
- 1x Febi Gasket, timing case cover (170573)
£137.64
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Weight | 1.257 kg |
| Bearing Type | Ball Bearing |
| Additional Information 2 | with rolling bearing |
| Additional Information | with fastening/mounting material |
| Length | 220 mm |
| Inner diameter | 41 mm |
| Placement on Vehicle | Front |
| Hole Spacing | 193 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.65
Important compatibility info
| Weight | 13.5 kg |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Length | 650 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.65
Important compatibility info
| Weight | 2.3 kg |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.85
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1044 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Weight | 11.680 kg |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 60 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.89
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 990 mm |
| Rod/Strut | Push Rod |
| Weight | 10.500 kg |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.89
Important compatibility info
| Weight | 4.20 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Left |
| for OE number | 1369381080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.95
Important compatibility info
| Weight | 10.500 kg |
| Bore Diameter | 19 mm |
| Placement on Vehicle | Rear Axle |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Length | 540 mm |
| Material | Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.95
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Inner diameter | 41 mm |
| Weight | 1.457 kg |
| Additional Information 2 | with rolling bearing |
| Length | 220 mm |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Rear |
| Hole Spacing | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.03
Important compatibility info
| Weight | 6.25 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Pipe Diameter | 80 mm. 71 mm |
| Mounting points diameter | 20 mm. 30 mm |
| Piston conrod diameter | 17 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 770 mm |
| Min. Length | 476 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.09
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 644 mm |
| Min. Length | 384 mm |
| Pipe Diameter | 65 mm. 76 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Weight | 5.6 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.09
Important compatibility info
| Min. Length | 426 mm |
| Max. Length | 696 mm |
| Mounting points diameter | 24 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Pipe Diameter | 80 mm. 69 mm |
| Weight | 6.2 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.09
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 3.043 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.10
Important compatibility info
| Timing Chain Size | G53HS-8, G53HS-7 |
| Chain Type | Simplex, with chain lock |
| Weight | 0.392 kg |
| Placement on Vehicle | Upper |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Number of Chain Links | 86 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49508)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Gasket Set, cylinder head cover (107453)
£138.14
Important compatibility info
| Weight | 1.1 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.14
Important compatibility info
| Weight | 0.801 kg |
| Screw length below head | 82 mm |
| Function | Repair Kit, flywheel |
| Type | Repair Kit, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, crankshaft (39948)
- 12x Febi Flywheel Bolt (46335)
- 1x Febi Pilot Bearing, clutch (11588)
£138.16
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Weight | 2.64 kg |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 122. 81 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (30779)
- 1x Febi Water Pump, engine cooling (22206)
£138.19
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 569 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Weight | 10.2 kg |
| Hole Spacing | 115 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.20
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 2.2 kW |
| Weight | 4.2 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.29
Important compatibility info
| Function | Throttle body |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Weight | 0.656 kg |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.30
Important compatibility info
| Weight | 2.5 kg |
| Outer diameter | 177 mm |
| Placement on Vehicle | Rear |
| Number of Holes | 6 |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.30
Important compatibility info
| Function | Alternator |
| Number of Ribs | 6 |
| Alternator Charge Current | 105 A |
| Pulleys | with belt pulley |
| Weight | 5.45 kg |
| Voltage | 12 V |
| Type | Alternator |
| Belt Pulley Diameter | 49 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.30
Important compatibility info
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| Weight | 0.76 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.30
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2 kW |
| Weight | 4.5 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.30
Important compatibility info
| Weight | 5.19 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 472 mm |
| Min. Length | 332 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Replaces | 20056; 20070 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.31
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Placement on Vehicle | Exhaust Side |
| Paired article numbers | 174705 |
| Weight | 0.162 kg |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Weight | 2.200 kg |
| Number of mounting bores | 2 |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M26 x 1,5, M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 7.932 kg |
| External Teeth, Diff.Side | 34 |
| Min. Length | 976 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 74.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Number of mounting bores | 4 |
| Weight | 0.505 kg |
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Weight | 1.4 kg |
| Number of Wings | 7 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Water pump impeller material | Metal |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 13568-39016 S5 |
| Weight | 3.02 kg |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (173548)
- 1x Febi Water Pump, engine cooling (24589)
£138.34
Important compatibility info
| Length | 785 mm |
| Width | 280 mm |
| Height | 285 mm |
| Weight | 5.20 kg |
| Colour | Black |
| Function | Oil sump |
| Wet Sump Material | Sheet Steel |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Function | Gasket Set, automatic transmission |
| Extra Description | febi Plus |
| Type | Gasket Set, automatic transmission |
| Weight | 0.370 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Operating Mode | Automatic |
| Weight | 1.155 kg |
| Width of castor bearing surface | 31 mm |
| Material | Metal |
| Outer diameter | 60 mm |
| Vehicle Main Current | for vehicles with 48V main current |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.608 kg |
| Function | Throttle body |
| Number of Connectors / Ports | 5 |
| Operating Mode | Electric |
| Voltage | 12 V |
| Height | 72 mm |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Weight | 2.87 kg |
| Type | Crankshaft, air compressor |
| Function | Crankshaft, air compressor |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.39
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 6.79 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.40
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.082 kg |
| Cable Length | 354 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.41
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Pressure Converter, exhaust control |
| Weight | 0.17 kg |
| Extra Description | febi Plus |
| Type | Pressure Converter, exhaust control |
| for OE number | 58 51 030 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.44
Important compatibility info
| Number of Connectors / Ports | 8 |
| Type | Mass Air Flow Sensor |
| Weight | 0.048 kg |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023