Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (17467)
- 1x Febi Coolant Pipe (48752)
- 1x Febi Seal Ring, water pump (49087)
- 1x Febi Seal Ring, water pump (49086)
£175.21
Important compatibility info
| Additional Information 2 | with nut |
| Bore Diameter | 8.5 mm |
| Thread Size | M24x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| External Teeth, Wheel Side | 25 |
| Number of mounting bores | 6 |
| Wheel Sided Joint Diameter | 98.3 mm |
| Placement on Vehicle | Front Axle Left |
| Min. Length | 515 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£175.39
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| Voltage | 24 V |
| Number of Connectors / Ports | 4 |
| Cable Length | 895 mm |
| Type | NOx Sensor, urea injection |
| Function | NOx Sensor, urea injection |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£175.42
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Voltage | 24 V |
| Number of Connectors / Ports | 4 |
| Cable Length | 1 mm |
| Type | NOx Sensor, urea injection |
| Function | NOx Sensor, urea injection |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£175.42
Important compatibility info
| Length | 1820 mm |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle, from steering gear to 1st intermediate steering lever |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£175.49
Important compatibility info
| Voltage | 24 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 100 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£175.69
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 901 mm |
| Pipe Diameter | 70 mm. 80 mm |
| Mounting points diameter | 20 mm |
| Placement on Vehicle | Rear Axle, non-steered trailing axle |
| Shock Absorber Type | Oil Pressure |
| Function | Shock Absorber |
| Piston conrod diameter | 20 mm |
| Min. Length | 558 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£175.71
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 5 |
| Cable Length | 596 mm |
| Type | NOx Sensor, NOx catalytic converter |
| Function | NOx Sensor, NOx catalytic converter |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£175.73
Important compatibility info
| Function | Water Pump, engine cooling |
| Outer diameter | 88 mm |
| Number of Teeth | 7 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£175.92
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 4 |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£175.92
Important compatibility info
| Manufacturer | Aspöck |
| Placement on Vehicle | Right |
| Height | 148 mm |
| Width | 420 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193018 |
| Port / Connector type | AMP 7 pin, 4 x 2 pin Superseal |
| Number of Connectors / Ports | 15 |
| Light Function | with rear fog light, with reverse light, with indicator, with taillight, with stop light, with reflector (triangular), without licence plate light |
| Depth | 85 mm |
| Protection Type (IP Code) | IP54 |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£175.92
Important compatibility info
| Type | Wheel Hub |
| Function | Wheel Hub |
| Bearing Type | Ball Bearing |
| Weight | 20.92 kg |
| Inner diameter | 120 mm |
| Outer diameter | 380 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter 1 | 150 mm |
| Bolt Hole Circle Diameter | 335 mm |
| Placement on Vehicle | Trailing Axle |
£175.95
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Voltage | 12 V |
| Number of Connectors / Ports | 5 |
| Cable Length | 890 mm |
| Type | NOx Sensor, urea injection |
| Function | NOx Sensor, urea injection |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£175.97
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Function | Alternator |
| Alternator Charge Current | 150 A |
| Pulleys | with belt pulley |
| Type | Alternator |
| Belt Pulley Diameter | 49 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.05
Important compatibility info
| Pulleys | with belt pulley |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Type | Hydraulic Pump, steering |
| Operating pressure to | 13 bar |
| Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.13
Important compatibility info
| Rolling piston material | Steel |
| Additional Information | with piston |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| External Thread Size | M10 x 1,5, M22 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 183440 |
| Outer diameter | 272 mm. 220 mm |
| Thickness | 256 mm. 605 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.44
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| External Thread Size | M10 x 1,5, M22 x 1,5 |
| Additional Information | with piston |
| Paired article numbers | 183438 |
| Thickness | 256 mm. 608 mm |
| Outer diameter | 220 mm. 273 mm |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.44
Important compatibility info
| Type | Actuator, seat adjustment |
| Function | Actuator, seat adjustment |
| Operating Mode | Pneumatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.45
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.47
Important compatibility info
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Length | 666 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.60
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023