Proud to be a UK-based company
Contact us
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Unit, glow time |
| Type | Control Unit, glow time |
| Number of Connectors / Ports | 6 |
| Weight | 0.08 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£164.08
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 1.046 kg |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 796 mm |
| Inner length 1 | 796 mm |
| Outer length 1 | 1051 mm |
| Outer length 2 | 1073 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£164.08
Important compatibility info
| Additional Information 2 | with plug |
| Weight | 0.437 kg |
| Width | 250 mm |
| Thickness | 100 mm |
| Placement on Vehicle | transmission sided |
| Operating Mode | Electric |
| Function | Mechatronics, automatic transmission |
| Extra Description | febi Plus |
| Length | 250 mm |
| Type | Mechatronics, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mechatronics, automatic transmission (32342)
- 1x Febi Plug Housing, automatic transmission control unit (36332)
£164.52
Important compatibility info
| Function | Water Pump, engine cooling |
| Weight | 5.6 kg |
| Outer diameter | 88 mm |
| Number of Teeth | 7 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£164.78
Important compatibility info
| Steering arm type | Control Arm, Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 10.520 kg |
| Placement on Vehicle | both sides, Rear Axle Lower |
| Length | 602 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Bore Diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£164.84
Important compatibility info
| Function | Expansion Tank, coolant |
| Length | 490 mm |
| Width | 240 mm |
| Material | PP (Polypropylene) |
| Thickness | 325 mm |
| Weight | 3.9 kg |
| Fill quantity | 5.5 l |
| Opening pressure | 110 kPa. 70 kPa |
| Additional Information | with coolant level sensor, with lids |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.03
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 56 mm |
| Weight | 7.15 kg |
| for OE number | 36012358 |
| Current Strength | 140 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Number of Ribs | 6 |
| Function | Oil Cooler, engine oil |
| Weight | 3.214 kg |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Weight | 0.98 kg |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Material | Plastic |
| Paired article numbers | 172924 |
| Colour | Black |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Weight | 0.451 kg |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Weight | 8.215 kg |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 60 mm |
| Function | Alternator |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Weight | 0.451 kg |
| Placement on Vehicle | Intake Side |
| Material | Plastic |
| Paired article numbers | 172921 |
| Colour | Black |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Weight | 0.89 kg |
| Height | 81 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 7 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Function | Tilt Pump, driver cab |
| Weight | 2.4 kg |
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M14 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Width | 76.1 mm |
| Weight | 1.46 kg |
| Placement on Vehicle | Rear Axle |
| Length | 85.4 mm |
| Brake System | Brembo |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.30
Important compatibility info
| Number of Teeth | 38 |
| Weight | 0.694 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (171987)
- 1x Febi Screw (101125)
- 1x Febi Quill, cylinder head (101129)
£165.46
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 810 mm |
| Min. Length | 495 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 6.6 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.81
Important compatibility info
| Weight | 4.73 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 710 mm |
| Min. Length | 445 mm |
| Pipe Diameter | 70 mm. 60 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Replaces | 20130 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.81
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 815 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Weight | 4.92 kg |
| Min. Length | 500 mm |
| Pipe Diameter | 80 mm. 71 mm |
| Function | Shock Absorber |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 17 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.81
Important compatibility info
| Function | Shock Absorber |
| Mounting points diameter | 20 mm. 24 mm |
| Max. Length | 714 mm |
| Min. Length | 438 mm |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Weight | 8.3 kg |
| Piston conrod diameter | 16 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.81
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023