Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 7 |
| Ignition Coil | 3 Spark |
| Function | Ignition Coil |
| Weight | 0.83 kg |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.54
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| Weight | 1.730 kg |
| Paired article numbers | 180725 |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.73
Important compatibility info
| Weight | 0.89 kg |
| Height | 84 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.93
Important compatibility info
| Thread Size | M27x1,5 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 86 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 100 mm |
| External Teeth, Wheel Side | 30 |
| Weight | 6.132 kg |
| Number of mounting bores | 6 |
| Min. Length | 617 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Additional Information 2 | with nut |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.09
Important compatibility info
| Outer diameter | 67.6 mm |
| Additional Information 2 | with seal ring |
| Weight | 1.147 kg |
| Opening Temperature | 77 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.09
Important compatibility info
| Material | Grey Cast Iron |
| Number of Wings | 5 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with lock nut, with gaskets/seals |
| Weight | 5.930 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.17
Important compatibility info
| Weight | 0.3 kg |
| Number of Connectors / Ports | 6 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| for OE number | 77 00 109 812 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.17
Important compatibility info
| Alternator Charge Current | 90 A |
| Weight | 5.662 kg |
| Belt Pulley Diameter | 50 mm |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Function | Alternator |
| Weight | 4.55 kg |
| Type | Alternator |
| Belt Pulley Diameter | 60 mm |
| Alternator Charge Current | 70 A |
| Pulleys | with belt pulley |
| Voltage | 12 V |
| Number of Ribs | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Vehicle Equipment | for vehicles with start-stop function |
| Number of Wings | 9 |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Additional Information 2 | switchable water pump |
| Operating Mode | Vacuum-controlled |
| Weight | 2.07 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 12 |
| Seal Material | Rubber/Metal, Rubber |
| Weight | 10.8 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Weight | 8.0 kg |
| External Thread Size | M30 x 1,5 |
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm, Control Arm |
| Cone Size | 42 mm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with spring |
| Additional Information 2 | with screw |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 84.7 mm |
| Wheel Sided Joint Diameter | 85.6 mm |
| Min. Length | 782 mm |
| External Teeth, Diff.Side | 27 |
| Thread Size | M16x1,5 |
| Paired article numbers | 183675 |
| External Teeth, Wheel Side | 31 |
| Weight | 7.182 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Voltage | 24 V |
| Operating Mode | Electric-pneumatic |
| Weight | 0.36 kg |
| Valve type | Solenoid Valve |
| Type | EGR valve, exhaust control |
| Function | EGR valve, exhaust control |
| Internal Thread Size | M10 x 1, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Weight | 12.0 kg |
| Thickness | 270 mm. 808 mm |
| Outer diameter | 260 mm. 286 mm |
| External Thread Size | M12 x 1,75, M16 x 2, M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.26
Important compatibility info
| Length | 585 mm |
| Hole Spacing | 152 mm |
| Placement on Vehicle | Rear Axle |
| Steering arm type | Trailing Arm |
| Weight | 14.120 kg |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.28
Important compatibility info
| Weight | 1.57 kg |
| Width | 25.9 mm |
| Outer diameter | 115.5 mm |
| Inner diameter | 14 mm |
| Number of Teeth | 46 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Additional Information 2 | without screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.38
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 66 |
| Function | Timing Chain Kit |
| Weight | 0.442 kg |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Timing Chain (49775)
- 1x Febi Tensioner, timing chain (104355)
- 1x Febi Tensioner, timing chain (104342)
£151.43
Important compatibility info
| Function | Window Regulator |
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 183418 |
| Number of Connectors / Ports | 2 |
| Weight | 2.3 kg |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.56
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 183419 |
| Number of Connectors / Ports | 2 |
| Weight | 2.3 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.56
Important compatibility info
| Function | Air Suspension Valve |
| Internal Thread Size | M22 x 1,5 |
| Weight | 1.95 kg |
| Number of Connectors / Ports | 4 |
| Type | Air Suspension Valve |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.59
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | both sides, Rear |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 8.617 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.59
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 59 mm |
| Weight | 7.1 kg |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.74
Important compatibility info
| Extra Description | febi Plus |
| Weight | 1.313 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.76
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | with brake fluid reservoir |
| Weight | 0.625 kg |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Driver Position | for right-hand drive vehicles |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.77
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Weight | 0.89 kg |
| for OE number | 77363827 SK |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.80
Important compatibility info
| Max. Length | 783 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Pipe Diameter | 73 mm. 63.5 mm |
| Placement on Vehicle | Rear Axle |
| Min. Length | 473 mm |
| Type | Shock Absorber |
| Weight | 6.36 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20088 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.95
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 5.01 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 632 mm |
| Min. Length | 370 mm |
| Pipe Diameter | 75 mm. 64 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.95
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 613 mm |
| Min. Length | 363 mm |
| Pipe Diameter | 57 mm. 50 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Weight | 3.1 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.95
Important compatibility info
| Outer diameter | 420 mm |
| Number of Teeth | 10 |
| Weight | 8.201 kg |
| Type | Clutch Disc |
| Function | Clutch Disc |
| Replaces | 105005 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.16
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | Fitting, intake manifold |
| Weight | 1.269 kg |
| Function | Fitting, intake manifold |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fitting, intake manifold (184536)
- 1x Febi Gasket, intake manifold (188181)
£152.17
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| Weight | 2.0 kg |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| for OE number | 24321-2B100 S1 |
| Number of Chain Links | 158 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
| Extra Description | Basic Short Kit |
| Weight | 0.893 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (108378)
- 1x Febi Tensioner, timing chain (170729)
- 1x Febi Guide, timing chain (174739)
- 1x Febi Guide, timing chain (174742)
£152.20
Important compatibility info
| Weight | 0.861 kg |
| Type | Cylinder Head Gasket Set, air compressor |
| Function | Cylinder Head Gasket Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 130 A |
| Belt Pulley Diameter | 65 mm |
| Weight | 7.02 kg |
| Current Strength | 130 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Parameter | 5 PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Weight | 2.813 kg |
| Number of Ribs | 4 |
| Outer diameter | 172 mm |
| Width | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 50 mm |
| Weight | 7.5 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Weight | 2.6 kg |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 353 mm |
| Min. Length | 277 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 104 |
| Timing Chain Size | G68HSF-6 |
| Function | Timing Chain |
| Weight | 0.57 kg |
| Type | Timing Chain |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Weight | 2.38 kg |
| Outer diameter 2 | 135 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 54 mm |
| Outer diameter | 67 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 55 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 10.350 kg |
| Bore Diameter | 19 mm. 21 mm |
| Steering arm type | Trailing Arm |
| Length | 383 mm |
| Placement on Vehicle | Rear Axle |
| Hole Pitch 1/ Hole Pitch 2 | 130/152 |
| Type | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Weight | 2.87 kg |
| Additional Information | with gaskets/seals |
| Function | Housing, oil cooler |
| Width | 265 mm |
| Length | 465 mm |
| Type | Housing, oil cooler |
| Thickness | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 2 kW |
| Weight | 4.3 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.20
Important compatibility info
| Height | 81 mm |
| Voltage | 12 V |
| Number of Connectors / Ports | 7 |
| Function | Throttle body |
| Weight | 0.905 kg |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Throttle Body (100796)
- 1x Febi Seal Ring, throttle body (103795)
£152.20
Important compatibility info
| Additional Information | with gaskets/seals |
| Weight | 1.336 kg |
| Type | Fitting, intake manifold |
| Function | Fitting, intake manifold |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fitting, intake manifold (183532)
- 1x Febi Gasket, intake manifold (188181)
£152.23
Important compatibility info
| Rod/Strut | Guide Rod |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
| Length | 644 mm |
| Outer diameter | 50 mm |
| Inner diameter | 40 mm. 65 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Weight | 10.6 kg |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.23
Important compatibility info
| Weight | 0.18 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.24
Important compatibility info
| Number of Connectors / Ports | 5 |
| Weight | 0.001 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.33
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 865 mm |
| Min. Length | 520 mm |
| Pipe Diameter | 74 mm. 65 mm |
| Mounting points diameter | 20 mm. 24 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| Weight | 4.24 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.34
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Material | Grey Cast Iron |
| Additional Information 2 | with seal ring |
| Weight | 6.170 kg |
| Number of grooves | 12 |
| Type | Water Pump, engine cooling |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£152.51
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023