Proud to be a UK-based company
Contact us
Important compatibility info
| Brake System | ATE |
| Placement on Vehicle | Rear Axle |
| Type | Accessory Kit, brake shoes |
| Function | Accessory Kit, brake shoes |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.04
Important compatibility info
| Function | Air Filter |
| Height | 27 mm |
| Width | 198 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Length | 290 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.04
Important compatibility info
| Height | 56 mm |
| Length | 212 mm |
| Filter type | Filter Insert |
| Width | 203 mm |
| Additional Information 2 | with pre-filter |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.04
Important compatibility info
| for OE number | 282 050 16 00 |
| Type | Finger Follower, engine timing |
| Function | Finger Follower, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.04
Important compatibility info
| Paired article numbers | 193006 |
| Number of Connectors / Ports | 7 |
| Type | Plug |
| Function | Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.04
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 185 mm |
| Material | Rubber |
| Inner diameter 1 | 12 mm |
| Function | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Type | Bellow Kit, steering |
| Inner diameter 2 | 37 mm |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (12531)
- 1x Febi Fastening Clamp (03326)
- 1x Febi Fastening Clamp (03327)
- 1x Febi Molybdenum Grease (02582)
£10.04
Important compatibility info
| Material | Plastic |
| Colour | White |
| Number of Connectors / Ports | 6 |
| Control Type | Rotary Operation |
| Function | Ignition Switch |
| Type | Ignition Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.05
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 225 mm |
| Rod/Strut | Coupling Rod |
| External Thread Size | M12 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 22.5 mm |
| Spanner Size | 17 |
| Thickness | 62 mm |
| Material | Steel |
| Replaces | 05162 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.05
Important compatibility info
| Material | Steel |
| Surface | Phosphatized |
| Thread Length | 22 mm. 48 mm |
| Quality/ Grade | 10.9 |
| Length | 112 mm |
| Shaft Length | 17 mm |
| Bolt Head Diameter | 32 mm |
| Function | Wheel Stud |
| Screw length below head | 46 mm. 60 mm |
| External Thread Size | M22 x 1,5 |
| Type | Wheel Stud |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Stud (05751)
- 1x Febi Wheel Nut (06425)
- 1x Febi Wheel Nut (04029)
£10.05
Important compatibility info
| Height | 200 mm |
| Outer diameter | 76 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.05
Important compatibility info
| Internal Thread Size | 3/4" - 16 UNF |
| Type | Fuel filter |
| Function | Fuel filter |
| Filter type | Spin-on Filter |
| Height | 131 mm |
| Additional Information 2 | with seal ring |
| Outer diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.05
Important compatibility info
| Height | 155 mm |
| Additional Information | with gaskets/seals |
| Outer diameter | 72 mm |
| Inner diameter | 34 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
| Gasket outer diameter | 79.8 mm. 78 mm |
| Gasket inner diameter | 72.8 mm. 72.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.05
Important compatibility info
| Height | 171 mm |
| Outer diameter | 84 mm |
| Filter type | Spin-on Filter, with water drain screw |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.05
Important compatibility info
| Outer diameter | 150 mm |
| Material | NBR (nitrile butadiene rubber) |
| Placement on Vehicle | Right, Left |
| Thickness | 15 mm |
| Inner diameter | 120 mm |
| Function | Shaft Seal, wheel hub |
| Replaces | 19007 |
| Type | Shaft Seal, wheel hub |
| Colour | blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.06
Important compatibility info
| Width | 10 mm |
| Number of Teeth | 81 |
| Belts | with rounded tooth profile |
| Function | Toothed Belt, power take-off |
| Belt Material | Polyester |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Type | Toothed Belt, power take-off |
| Units / Pulleys | Water Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.06
Important compatibility info
| Outer diameter | 41 mm |
| Thickness | 72 mm |
| Inner diameter | 24 mm |
| Function | Mounting, stabiliser bar |
| Width | 40 mm |
| Material | Rubber |
| Placement on Vehicle | Front Axle |
| Length | 35 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.06
Important compatibility info
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Rear Axle |
| Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.06
Important compatibility info
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
| Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.06
Important compatibility info
| Placement on Vehicle | Front Axle Left, only fitted on one side |
| Length | 850 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.06
Important compatibility info
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle Right |
| Length | 110 mm |
| Function | Rubber Buffer, suspension |
| Width | 55 mm |
| Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023