Important compatibility info
Number of Connectors / Ports | 2 |
Colour Coding | Grey |
Additional Information | with gasket/seal, with retaining spring |
Function | Sensor, coolant temperature |
Screw length below head | 20 mm |
Weight | 0.015 kg |
Type | Sensor, coolant temperature |
Replaces | 33911 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 65.2 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Material | Aluminium |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Type | Mounting, control/trailing arm |
Weight | 0.45 kg |
Replaces | 29346 |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.094 kg |
Length | 1100 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 5 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Function | Oil Filter |
Type | Oil Filter |
Height | 145 mm |
Outer diameter | 73 mm |
Additional Information 2 | with seal ring |
Filter type | Filter Insert |
Seal Diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.3 kg |
Length | 300 mm |
Height | 30 mm |
Width | 205 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.236 kg |
Placement on Vehicle | Front Axle Left, transmission sided, Front Axle Right |
Length | 87 mm |
Material | Rubber |
Function | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 72 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38342)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45644)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Length | 126 mm |
Height | 126 mm |
Outer diameter | 21 mm. 60 mm. 72 mm. 82 mm. 83 mm |
Weight | 0.26 kg |
Function | Bellow Kit, drive shaft |
Placement on Vehicle | Front Axle, Rear Axle |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.110 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 265 mm |
Function | Brake Hose |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Coupling Rod |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.386 kg |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with bolts/screws |
Material | Steel |
Length | 90 mm |
Replaces | 32490 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (32489)
- 2x Febi Clamping Bolt, ball joint (07866)
Important compatibility info
Weight | 0.378 kg |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Inner diameter | 12 mm |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 57 mm |
Outer diameter | 113 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.485 kg |
Function | Tie Rod End |
Type | Tie Rod End |
External Thread Size | M14 x 1,5 |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, differential |
Type | Mounting, differential |
Weight | 0.154 kg |
Inner diameter | 12 mm |
Thickness | 60 mm |
Outer diameter | 58 mm |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 23418 |
Length | 100 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Placement on Vehicle | Rear Axle |
Weight | 0.080 kg |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.03 kg |
Placement on Vehicle | transmission sided |
Width | 8.8 mm |
Material | PTFE (polytetrafluoroethylene) |
Outer diameter | 105 mm |
Inner diameter | 85 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Replaces | 11813 |
Additional Information 2 | with mounting sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Placement on Vehicle | Rear |
Material | FPM (fluoride rubber) |
Outer diameter | 75 mm |
Thickness | 10 mm |
Inner diameter | 43 mm |
Function | Shaft Seal, differential |
Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (21840)
- 1x Febi Nut (22263)
- 1x Febi Screw (21478)
Important compatibility info
Weight | 0.200 kg |
Internal Thread Size | M10 x 1,5 |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 21920 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Spanner Size | 13 |
Thickness | 38 mm |
Material | Aluminium |
Height | 32 mm |
Length | 125 mm |
Type | Link/Coupling Rod, stabiliser bar |
Hole Spacing | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.200 kg |
Paired article numbers | 21922 |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left |
Internal Thread Size | M10 x 1,5 |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Length | 125 mm |
Height | 32 mm |
Material | Aluminium |
Thickness | 38 mm |
Spanner Size | 13 |
Hole Spacing | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Length | 125 mm |
Weight | 0.250 kg |
Spanner Size | 13 |
Thickness | 38 mm |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 21926 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with bolts/screws |
Hole Spacing | 90 mm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Nut (22263)
- 1x Febi Link/Coupling Rod, stabiliser bar (21920)
- 2x Febi Screw (21919)
Important compatibility info
Additional Information | with nuts |
Spanner Size | 13 |
Weight | 0.250 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 21924 |
Rod/Strut | Coupling Rod |
Hole Spacing | 90 mm |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Material | Aluminium |
Length | 125 mm |
Additional Information 2 | with bolts/screws |
Thickness | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (21922)
- 2x Febi Screw (21919)
- 2x Febi Nut (22263)
Important compatibility info
Weight | 0.14 kg |
Material | Rubber |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Height | 205 mm |
Inner diameter | 48 mm |
Inner diameter 1 | 11 mm. 18 mm. 26 mm. 38 mm. 45 mm |
Inner diameter 2 | 36 mm. 44 mm. 50 mm. 57 mm |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.15 kg |
Height | 18 mm |
Spanner Size | 17 |
Colour | Grey |
Type | Cap, wheel bolt |
Function | Cap, wheel bolt |
Extra Description | febi Plus |
Additional Information | with puller |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with puller |
Weight | 0.15 kg |
Spanner Size | 17 |
Height | 18 mm |
Function | Cap, wheel bolt |
Extra Description | febi Plus |
Type | Cap, wheel bolt |
Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Weight | 0.452 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Function | Wheel Bolt |
Wheel Fastening | Ball seat A/G |
Thread Length | 27 mm |
Surface | Chromed |
Spanner Size | 17, 19 |
Length | 53.5 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Weight | 0.45 kg |
Screw length below head | 29 mm |
Outer diameter | 23.7 mm |
Material | Steel |
Quality/ Grade | 8.8 |
Type | Wheel Bolt |
Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 0.175 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, headlight cleaning |
Type | Washer Fluid Pump, headlight cleaning |
Replaces | 103611 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 76 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Mounting points diameter | 17 mm |
Weight | 0.205 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Placement on Vehicle | Front Axle, Rear Axle |
Height | 151 mm |
Outer diameter | 27 mm. 75 mm. 92 mm. 100 mm. 108 mm. 116 mm |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Weight | 0.23 kg |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.485 kg |
Placement on Vehicle | Front Axle |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | without ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (26360)
- 2x Febi Nut (14392)
- 1x Febi Screw (24796)
- 1x Febi Bolt, control arm (39749)
- 1x Febi Washer (39748)
- 1x Febi Nut (32615)
Important compatibility info
Colour | Black |
Number of Connectors / Ports | 2 |
Type | Sensor, exterior temperature |
Function | Sensor, exterior temperature |
Weight | 0.003 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.70 kg |
Placement on Vehicle | Right |
Material | NBR (nitrile butadiene rubber) |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fuel filter |
Pressure | 4 bar |
Type | Fuel filter |
Weight | 0.274 kg |
Height | 176 mm |
Outer diameter | 74 mm |
Additional Information 2 | with pressure regulator |
Filter type | In-Line Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle |
Weight | 0.41 kg |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Length | 138 mm |
Height | 66 mm |
Outer diameter | 67 mm. 73 mm |
Additional Information 2 | without ball bearing |
Inner diameter | 11 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 64 mm |
Thickness | 80 mm |
Inner diameter | 12 mm |
Weight | 0.486 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
for OE number | 4D0 407 183 AC |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.065 kg |
Placement on Vehicle | Left |
Material | NBR (nitrile butadiene rubber) |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 713 mm |
Eject Force | 330 N |
Stroke | 313 mm |
Weight | 0.331 kg |
Housing length | 378.5 mm |
Mounting points diameter | 18 mm |
Placement on Vehicle | Left |
Housing Diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 104173 |
Number of Connectors / Ports | 2 |
Resistance | 1700 Ohm |
Cable Length | 1365 mm |
Function | Sensor, wheel speed |
Weight | 0.140 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Number of Connectors / Ports | 3 |
Function | Pressure Switch, air conditioning |
Type | Pressure Switch, air conditioning |
for OE number | 1K0 959 126 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.59 kg |
Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 80.5 mm |
Thickness | 68 mm |
Inner diameter | 19 mm |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.202 kg |
Function | Gas Spring, boot/cargo area |
Placement on Vehicle | both sides |
Length | 279 mm |
Housing Diameter | 19 mm |
Eject Force | 700 N |
Stroke | 64 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Housing length | 204 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hydraulic Filter, automatic transmission |
Material | Plastic |
Weight | 0.381 kg |
Length | 231.5 mm |
Height | 122 mm |
Type | Hydraulic Filter, automatic transmission |
Filter type | Screen Filter |
Width | 196 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting and Bolting Kit, control/trailing arm |
Placement on Vehicle | Front Axle |
Steering arm type | Control Arm |
Weight | 3.15 kg |
Type | Mounting and Bolting Kit, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Screw (21475)
- 6x Febi Nut (14392)
- 2x Febi Nut (24795)
- 2x Febi Screw (24796)
- 2x Febi Screw (21476)
- 4x Febi Screw (31032)
- 2x Febi Nut (22263)
- 2x Febi Nut (32615)
- 2x Febi Bolt, control arm (39749)
- 2x Febi Washer (39748)
- 2x Febi Nut (24799)
Important compatibility info
Weight | 0.50 kg |
Placement on Vehicle | Front Axle Left, Upper, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 32319 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 32318 |
Placement on Vehicle | Front Axle Right, Upper, Front |
Weight | 0.50 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.4 kg |
Placement on Vehicle | Rear Axle |
Length | 116.2 mm |
Width | 58.6 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | pneumatic |
Function | Fuel Pressure Regulator |
Pressure | 4 bar |
Weight | 0.05 kg |
Type | Fuel Pressure Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without lid |
Material | Plastic |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Weight | 0.624 kg |
Additional Information | with coolant level sensor |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.969 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information | with fastening/mounting material |
Steering | with tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (21840)
- 1x Febi Inner Tie Rod (26151)
Important compatibility info
Length | 55 mm |
Width | 42 mm |
Thickness | 22 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Placement on Vehicle | Left |
Weight | 0.01 kg |
Type | Sensor, camshaft position |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Upper, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 31331 |
Weight | 0.47 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023