Important compatibility info
Placement on Vehicle | Rear Axle, Wheel Side |
Length | 69 mm |
Material | Rubber |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 68 mm |
Function | Bellow Kit, drive shaft |
Weight | 0.20588 kg |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (34943)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Weight | 0.190 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 44 mm |
Material | Plastic |
Outer diameter | 107 mm |
Inner diameter | 35 mm |
Bearing Type | Angular Ball Bearing |
Function | Rolling Bearing, suspension strut support mount |
Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, drive shaft |
Inner diameter 2 | 72 mm |
Inner diameter 1 | 22 mm |
Material | Thermoplast |
Length | 127 mm |
Weight | 0.061 kg |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 345 mm |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Weight | 0.02 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Switch Relay, headlight dimmer |
Voltage | 12 V |
Number of Connectors / Ports | 5 |
Weight | 0.03 kg |
Type | Switch Relay, headlight dimmer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 267 mm |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.32 kg |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M10 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 62 mm |
Material | Rubber |
Function | Bellow Kit, drive shaft |
Inner diameter 3 | 74 mm |
Weight | 0.27 kg |
Placement on Vehicle | Front Axle, Rear Axle |
Outer diameter | 94 mm. 86 mm. 78 mm. 66 mm. 38 mm. 32 mm. 28 mm. 24 mm |
Length | 130 mm |
Type | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Rubber Buffer, suspension |
Width | 72 mm |
Length | 100 mm |
Placement on Vehicle | Front Axle Right, Front Axle Left |
Function | Rubber Buffer, suspension |
Material | PU (Polyurethane) |
Weight | 0.060 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Hose |
Type | Brake Hose |
Thread Length | 9 mm |
Weight | 0.086 kg |
Length | 325 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Internal Thread Size | M10 x 1 |
External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Inner diameter | 14.1 mm |
Outer diameter | 42.5 mm |
Material | Rubber/Metal |
Length | 50 mm |
Weight | 0.25 kg |
Type | Mounting, control/trailing arm |
Placement on Vehicle | Rear Axle Left, Front, Outer, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Length | 79.5 mm |
Spanner Size | 18 |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 11.9 |
Function | Pulley Bolt |
Screw length below head | 56 mm |
Weight | 0.250 kg |
Placement on Vehicle | frontal sided |
Type | Pulley Bolt |
Surface | Zink flake coated |
Bolt / Nut Version | with lockwasher |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.120 kg |
Length | 375 mm |
Height | 29 mm |
Width | 167 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.221 kg |
Length | 259 mm |
Height | 32 mm |
Width | 98 mm |
Filter type | Activated Carbon Filter |
Type | Filter Set, cabin air |
Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 320 mm |
Material | Steel |
Thickness | 63 mm |
Rod/Strut | Suspension Rod |
Thread Length | 25.4 mm |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.372 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 0.4 mm |
Function | Gasket, oil pump |
Material | NBR (nitrile butadiene rubber), Steel |
Weight | 0.020 kg |
Type | Gasket, oil pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 167 mm |
Height | 64 mm |
Outer diameter | 64 mm |
Inner diameter | 23 mm |
Filter type | Filter Insert |
Seal Diameter | 71 mm |
Function | Oil Filter |
Weight | 0.092 kg |
Type | Oil Filter |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.200 kg |
Length | 239 mm |
Height | 50 mm |
Width | 162 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.100 kg |
Material | Plastic |
Function | Cap, coolant tank |
Opening Pressure | 2 bar |
for OE number | 17 11 7 639 021 |
Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.21 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Steel |
Spanner Size | 17 |
Rod/Strut | Coupling Rod |
Colour | Silver |
Function | Link/Coupling Rod, stabiliser bar |
Diameter | 33 mm |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Thread Length | 45 mm |
Additional Information 2 | with washers, with nut |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.1 kg |
Opening Temperature | 80 °C |
Function | Thermostat, coolant |
Replaces | 10267 |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (09739)
- 1x Febi Seal, thermostat (10258)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023