Important compatibility info
| Thread Measurement 2 | M10X1.5 |
| Thread Size | M10X1.5 |
| Length | 223 mm |
| Material | Plastic |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Function | Filter, cabin air |
| Filter type | Particulate Filter |
| Width | 198 mm |
| Height | 10 mm |
| Length | 273 mm |
| Type | Filter, cabin air |
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Length | 284 mm |
| Thread Size | M10x1 |
| Thread Type | with internal thread |
| Additional Information | with banjo fitting |
| Additional Information 2 | with banjo bolt |
| Mounting Bolt Thread Size | M10x1.5 |
Important compatibility info
| Inner diameter | 14.2 mm |
| Diameter | 66.3 mm |
| Length | 76 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK7711 |
Important compatibility info
| Axle Joint Length | 306 mm |
| Thread Measurement 2 | M16X1.5 |
| Length | 306 mm |
| Thread Measurement 1 | M16X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Thread Type | with external thread |
| Type | Inner Tie Rod |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Axle Joint Length | 375 mm |
| Thread Measurement 2 | M14X1.5 |
| Thread Measurement 1 | M16X1.5 |
| Length | 375 mm |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
Important compatibility info
| Length | 515 mm |
| Required quantity | 2 |
| Function | Warning Contact, brake pad wear |
| Placement on Vehicle | Rear Axle |
| Type | Warning Contact, brake pad wear |
Important compatibility info
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Important compatibility info
| Thread Type | with internal thread |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left, Front Axle Right, outer |
| Type | Tie Rod End |
| Replaces | BTR4956 |
Important compatibility info
| Additional Information | with banjo fitting |
| Additional Information 2 | without banjo bolt |
| Length | 470 mm |
| Function | Brake Hose |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Thread Type | with internal thread |
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 51 mm |
| Diameter To | 55 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 55 mm |
| Diameter To | 59 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
Important compatibility info
| Axle Joint Thread Type | with right-hand thread, with internal thread |
| Thread Measurement 2 | M14X1.5 |
| Length | 176 mm |
| Thread Measurement 1 | M14X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 176 mm |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Additional Information 2 | with clamps |
| Length | 112 mm |
| Inner diameter 2 | 86 mm |
| Inner diameter 1 | 26 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
Important compatibility info
| Pressure | 1.3 bar |
| Material | Plastic |
| Pressure to | 20 psi |
| Function | Cap, coolant tank |
| Type | Cap, coolant tank |
Important compatibility info
| Material | Polychloroprene (Neoprene) |
| Function | Bellow Kit, drive shaft |
| Length | 112 mm |
| Inner diameter 2 | 86 mm |
| Inner diameter 1 | 26 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
Important compatibility info
| Function | Accessory Kit, brake shoes |
| Type | Accessory Kit, brake shoes |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Diameter | 25.4 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Additional Information 2 | without banjo bolt |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 321 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Additional Information | with banjo fitting |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















