Important compatibility info
| Mounting Type | Bolted |
| Number of mounting bores | 3 |
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Measurement 1 | M16x1.5 |
| Bore Diameter 1 | 17.2 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Bore Diameter 2 | 22 mm |
Important compatibility info
| Diameter | 66.3 mm |
| Length | 54 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6984 |
| Placement on Vehicle | Front Axle, Left, Right |
Important compatibility info
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Thread Measurement 2 | M14X1.5 |
| Length | 301 mm |
| Thread Measurement 1 | M14X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 301 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Height | 121 mm |
| Outer diameter | 103 mm |
| Filter type | with filter heating, Filter Insert |
| Outer diameter 2 | 92 mm |
| Type | Fuel Filter |
| Function | Fuel Filter |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Length | 110 mm |
| Inner diameter 2 | 84 mm |
| Inner diameter 1 | 26 mm |
| Material | Thermoplast |
| Lubrication | with grease lubrication |
| Type | Bellow Kit, drive shaft |
| Replaces | BCB6249 |
Important compatibility info
| Diameter | 22.2 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Measurement 2 | M10X1.5 |
| Thread Size | M10X1.5 |
| Length | 300 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL6768 |
Important compatibility info
| Thread Measurement 2 | M10X1.5 |
| Thread Size | M10X1.5 |
| Length | 300 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL6767 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Replaced by | BDL7061 |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Thread Measurement 2 | M12X1.25 |
| Thread Size | M12X1.25 |
| Length | 288 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Function | Filter, cabin air |
| Width 2 | 170 mm |
| Width 1 | 255 mm |
| Filter type | Activated Carbon Filter |
| Height | 35 mm |
| Type | Filter, cabin air |
| Length | 250 mm |
Important compatibility info
| Function | Fuel filter |
| Outlet Diameter | 10 mm |
| Inlet Diameter | 10 mm |
| Outer diameter | 90 mm |
| Height | 154 mm |
| Type | Fuel filter |
| Filter type | In-Line Filter |
Important compatibility info
| Length 1 | 1612 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear, Right Rear |
Important compatibility info
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Inner diameter 2 | 44 mm |
| Inner diameter 1 | 11 mm |
| Length | 160 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
| Material | Rubber |
Important compatibility info
| Function | Bushing, axle cross member |
| Type | Bushing, axle cross member |
| Placement on Vehicle | Front Axle, Left, Right, Front |
Important compatibility info
| Colour | Black |
| Inner diameter 1 | 24 mm |
| Function | Charge Air Hose |
| Inner diameter 2 | 24 mm |
| Type | Charge Air Hose |
| Material | PE (Polyethylene) |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1000S)
Important compatibility info
| Inner diameter 2 | 15.4 mm |
| Inner diameter 1 | 15.4 mm |
| Material | NBR (nitrile butadiene rubber) |
| Function | Intake Hose, air filter |
| Type | Intake Hose, air filter |
Important compatibility info
| Bearing Code | Gen 1 |
| Inner diameter 1 | 25 mm |
| Outer diameter 1 | 52 mm |
| Only in connection with | BHN212, FHN212 |
| Width 1 | 37 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















