Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Inner diameter 2 | 77 mm |
| Inner diameter 1 | 22 mm |
| Length | 94 mm |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Additional Information 2 | with clamps |
Important compatibility info
| Length 1 | 2432 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Centre |
Important compatibility info
| Length | 1203 mm |
| Function | Cable Pull, clutch control |
| Type | Cable Pull, clutch control |
Important compatibility info
| Axle Joint Length | 328 mm |
| Thread Measurement 2 | M16X1.5 |
| Length | 328 mm |
| Thread Measurement 1 | M12X1.0 |
| Function | Inner Tie Rod |
| Axle Joint Thread Type | with right-hand thread, with internal thread |
| Type | Inner Tie Rod |
Important compatibility info
| Bearing Code | Gen 0 |
| Placement on Vehicle | Front Axle |
| Inner diameter 1 | 41 mm |
| Inner diameter 2 | 29 mm |
| Outer diameter 1 | 68 mm |
| Only in connection with | BHN205, FHN205 |
| Width 1 | 18 mm |
| Outer diameter 2 | 50 mm |
| Width 2 | 14.5 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
Important compatibility info
| Thread Measurement 2 | M20X1.5 F |
| Length | 150 mm |
| Thread Measurement 1 | M18X1.5 M |
| Function | Inner Tie Rod |
| Axle Joint Length | 150 mm |
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Type | Inner Tie Rod |
Important compatibility info
| Length | 190 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Type | with internal thread |
Important compatibility info
| Length | 331 mm |
| Thread Measurement 1 | M16x1.5 |
| Thread Measurement 2 | M16X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 331 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Inner Tie Rod |
Important compatibility info
| Thread Size | M10x1 |
| Additional Information | with banjo fitting |
| Length | 285 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Thread Type | with internal thread |
Important compatibility info
| Length | 370 mm |
| Function | Brake Hose |
| Thread Measurement 2 | M10x1 |
| Type | Brake Hose |
| Thread Measurement 1 | M10x1 |
| Thread Type | with internal thread |
Important compatibility info
| Version | Fitting Kit |
| Thread Measurement 1 | M14x1.5 |
| Bore Diameter | 34.3 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Mounting Type | Pressed |
| Steering arm type | for control arm |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Length | 98 mm |
| Inner diameter 2 | 88 mm |
| Inner diameter 1 | 25 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
Important compatibility info
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 285 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL6650 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 285 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL6649 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Function | Bellow Kit, steering |
| Length | 214 mm |
| Inner diameter 1 | 11 mm |
| Inner diameter 2 | 55 mm |
| Type | Bellow Kit, steering |
| Replaces | BSG3171 |
| Material | Rubber |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Material | PE (Polyethylene) |
| Inner diameter 1 | 55 mm |
| Function | Charge Air Hose |
| Colour | Black |
| Inner diameter 2 | 55 mm |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
| Thread Measurement 2 | M14X1.5 |
| Length | 269 mm |
| Thread Measurement 1 | M14X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 269 mm |
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Type | Inner Tie Rod |
Important compatibility info
| Function | Tie Rod End |
| Type | Tie Rod End |
Important compatibility info
| Inner diameter | 14.3 mm |
| Diameter | 70.3 mm |
| Length | 70 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6352 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















