Important compatibility info
Weight | 0.565 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Length | 275.5 mm |
Extra Description | ProKit |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M14 x 1,5 |
Type | Inner Tie Rod |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Placement on Vehicle | transmission sided |
Width | 11 mm |
Material | FPM (fluoride rubber) |
Outer diameter | 104 mm |
Inner diameter | 90 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Fuel filter |
Function | Fuel filter |
Inner diameter | 60 mm |
Internal Thread Size | M16 x 1,5 |
Filter type | Spin-on Filter |
Height | 158 mm |
Outer diameter | 84 mm |
Weight | 0.380 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.320 kg |
Placement on Vehicle | Front Axle Left |
Length | 75 mm |
Paired article numbers | 08169 |
Function | Tie Rod End |
Type | Tie Rod End |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M14 x 2 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Height | 134 mm |
Outer diameter | 53 mm |
Filter type | Filter Insert |
Type | Oil Filter |
Function | Oil Filter |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Function | Wheel Brake Cylinder |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.203 kg |
Piston Diameter | 22 mm |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.136 kg |
Placement on Vehicle | Front, both sides |
Width | 22 mm. 18 mm |
Function | Joint Bearing, driver cab suspension |
Inner diameter | 30 mm |
Type | Joint Bearing, driver cab suspension |
Outer diameter | 47 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.236 kg |
Height | 102 mm |
Width | 24 mm |
Port / Connector type | DIN Connector |
DIN / ISO | 72591 |
Number of circuits | 2 |
Type | Holder, rotating beacon |
Function | Holder, rotating beacon |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Type | Gasket, exhaust manifold |
Length | 119 mm |
Width | 90 mm |
Function | Gasket, exhaust manifold |
Weight | 0.037 kg |
Thickness | 1.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.340 kg |
Placement on Vehicle | Front Axle Right |
Length | 255 mm |
Material | Steel |
Paired article numbers | 19649 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 179 mm |
Diameter | 1 mm |
Material | Steel |
Spanner Size | 18 |
Paired article numbers | 179806 |
Rod/Strut | Coupling Rod |
Thread Length | 31 mm |
Weight | 0.525 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,75 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
External Thread Size | M10 x 1,25 |
Weight | 0.59 kg |
Cone Size | 16 mm |
Mounting points diameter | 10.5 mm |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with bolts/screws, with washers |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.079 kg |
Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 34.5 mm |
Thickness | 40 mm |
Inner diameter | 14.2 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Weight | 0.171 kg |
Outer diameter | 40 mm |
Thickness | 45 mm |
Inner diameter | 12.2 mm |
Placement on Vehicle | Rear Axle Left, inner, Upper, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.060 kg |
Placement on Vehicle | Rear Axle Left, Centre, inner, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 40.3 mm |
Thickness | 73 mm |
Inner diameter | 12.2 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Material | Steel |
Paired article numbers | 179803 |
Spanner Size | 18 |
Diameter | 1 mm |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,75 |
Rod/Strut | Coupling Rod |
Length | 179 mm |
Placement on Vehicle | Front Axle Left |
Thread Length | 31 mm |
Weight | 0.525 kg |
Additional Information | with nuts |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 250 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.30 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 60 mm |
Function | Shaft Seal, crankshaft |
Weight | 0.015 kg |
Inner diameter | 45 mm |
Rotation Direction | Clockwise rotation |
Placement on Vehicle | frontal sided |
Width | 8 mm |
Material | PTFE (polytetrafluoroethylene) |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.360 kg |
Length | 94 mm |
Paired article numbers | 19874 |
Placement on Vehicle | Front Axle Left |
Additional Information | with lock nut |
Function | Tie Rod End |
Type | Tie Rod End |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.123 kg |
Length | 1450 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 5 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023