Important compatibility info
| Length | 296 mm |
| Function | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Thread Measurement 1 | M10x1 |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Additional Information | with banjo fitting |
| Placement on Vehicle | Rear Axle Left |
Important compatibility info
| Function | Inner Tie Rod |
| Thread Measurement 2 | M14x1.5 |
| Thread Measurement 1 | M20x1.5 |
| Length | 201 mm |
| Axle Joint Length | 201 mm |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Length | 158 mm |
| Inner diameter 1 | 11 mm |
| Inner diameter 2 | 33 mm |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Material | Rubber |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Length | 105 mm |
| Thread Measurement 2 | M18X1.5 |
| Type | Tie Rod End |
| Cone Size | 22 mm |
| Thread Measurement 1 | M24X1.5 |
| Function | Tie Rod End |
Important compatibility info
| Length | 95 mm |
| Thread Measurement 1 | M16X1.5 |
| Thread Measurement 2 | M24X1.5 LHT |
| Thread Type | with left-hand thread |
| Cone Size | 20 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 270 mm |
| Material | Metal |
| Type | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Thread Size | M10X1.25 |
Important compatibility info
| Axle Joint Length | 276 mm |
| Thread Measurement 2 | M14X1.5 |
| Length | 276 mm |
| Thread Measurement 1 | M12X1.0 |
| Function | Inner Tie Rod |
| Axle Joint Thread Type | with right-hand thread, with internal thread |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Extra Description | Trilobe |
| Length | 117 mm |
| Inner diameter 2 | 74 mm |
| Inner diameter 1 | 25 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Length | 90 mm |
| Inner diameter 2 | 90 mm |
| Inner diameter 1 | 24 mm |
| Lubrication | with grease lubrication |
| Type | Bellow Kit, drive shaft |
Important compatibility info
| Function | Bellow Kit, steering |
| Length | 215 mm |
| Inner diameter 1 | 17 mm |
| Inner diameter 2 | 58 mm |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Material | Rubber |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6346 |
Important compatibility info
| Thread Measurement 2 | M12X1.5 |
| Length | 278 mm |
| Thread Measurement 1 | M14X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 278 mm |
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Type | Inner Tie Rod |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Size | M10x1 |
| Length | 379 mm |
| Thread Type | with internal thread |
Important compatibility info
| Mounting Type | Bolted |
| Number of Rivet Holes | 2 |
| Bore Diameter 1 | 13.5 mm |
| Function | Ball Joint |
| Additional Information 2 | without bolts/screws |
| Type | Ball Joint |
| Diameter | 16 mm |
| Steering arm type | for control arm |
| Number of mounting bores | 2 |
| Cone Size | 16 mm |
Important compatibility info
| Length | 170 mm |
| Inner diameter 1 | 12 mm |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Inner diameter 2 | 40 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber |
| Additional Information 2 | with clamps |
Important compatibility info
| Thread Measurement 1 | M14x1.5 |
| Thread Type | with right-hand thread, with internal thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR4605 |
| Placement on Vehicle | Front Axle Left, outer |
Important compatibility info
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Axle Joint Length | 334 mm |
| Thread Measurement 2 | M14X1.5 |
| Length | 334 mm |
| Thread Measurement 1 | M16X1.5 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
Important compatibility info
| Thread Measurement 1 | M14x1.5 |
| Thread Type | with right-hand thread, with internal thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR5540 |
Important compatibility info
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR5829 |
| Placement on Vehicle | Front Axle Right, outer |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Rod/Strut, wheel suspension |
| Type | Rod/Strut, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR5830 |
| Placement on Vehicle | Front Axle Left, outer |
Important compatibility info
| Thread Measurement 2 | M10x1 |
| Length | 492 mm |
| Thread Type | with internal thread, with external thread |
| Function | Brake Hose |
| Thread Measurement 1 | M10x1 |
| Type | Brake Hose |
Important compatibility info
| Function | Brake Hose |
| Length | 410 mm |
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle Right |
| Thread Type | with external thread |
Important compatibility info
| Length | 515 mm |
| Function | Brake Hose |
| Additional Information | with banjo fitting |
| Additional Information 2 | without banjo bolt |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Left |
| Thread Type | with internal thread |
Important compatibility info
| Additional Information 2 | without banjo bolt |
| Length | 515 mm |
| Function | Brake Hose |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Additional Information | with banjo fitting |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Length | 400 mm |
| Function | Brake Hose |
| Thread Type | with internal thread, with external thread |
| Type | Brake Hose |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Measurement 2 | M12X1.25 |
| Thread Size | M12X1.25 |
| Length | 90 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Function | Fuel filter |
| Outlet Diameter | 8 mm |
| Inlet Diameter | 8 mm |
| Outer diameter | 81 mm |
| Height | 160 mm |
| Type | Fuel filter |
| Filter type | In-Line Filter |
Important compatibility info
| Placement on Vehicle | Left, Lower, Front |
| Function | Charge Air Hose |
| Colour | Black |
| Material | PE (Polyethylene) |
| Inner diameter 1 | 47 mm |
| Type | Charge Air Hose |
| Inner diameter 2 | 34 mm |
| Replaced by | BTH1047 |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1102S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1105S)
Important compatibility info
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR5968 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR5969 |
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
| Type | Accessory Kit, disc brake pad |
Important compatibility info
| Thread Type | with internal thread |
| Length | 224 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Additional Information | with banjo fitting |
| Placement on Vehicle | Rear Axle, Left, outer |
| Thread Measurement 1 | M10x1 |
Important compatibility info
| Function | Brake Hose |
| Length | 513 mm |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with banjo fitting |
Important compatibility info
| Additional Information 2 | without banjo bolt |
| Function | Brake Hose |
| Length | 513 mm |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Additional Information | with banjo fitting |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Mounting Type | Pressed |
| Version | Fitting Kit |
| Bore Diameter 1 | 19.2 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Bore Diameter 2 | 22 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, transmission sided |
| Function | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
| Length | 97 mm |
| Inner diameter 2 | 64 mm |
| Inner diameter 1 | 29 mm |
| Type | Bellow Kit, drive shaft |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 266 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 75 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL7002 |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 75 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL7001 |
Important compatibility info
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 55 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL7006 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Height | 121 mm |
| Width | 119 mm |
| Inlet Diameter | 10 mm |
| Outlet Diameter | 10 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Filter type | In-Line Filter |
Important compatibility info
| Length | 121 mm |
| Inner diameter | 18.1 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6188 |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Repair Kit, stabiliser coupling rod |
| Material | Textile |
| Inner diameter | 17 mm |
| Type | Repair Kit, stabiliser coupling rod |
Important compatibility info
| Axle Joint Thread Type | with right-hand thread, with internal thread |
| Thread Measurement 2 | M16X1.5 |
| Length | 198 mm |
| Thread Measurement 1 | M16X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 198 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Thread Measurement 1 | M14x1.5 |
| Thread Type | with internal thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Type | with internal thread |
| Thread Size | M10x1 |
| Length | 494 mm |
| Function | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Type | Brake Hose |
| Additional Information | with banjo fitting |
Important compatibility info
| Material | Plastic |
| for OE number | 038 121 132 G |
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Placement on Vehicle | Rear Axle, Left, Right |
| Function | Bushing, axle cross member |
| Type | Bushing, axle cross member |
Important compatibility info
| Length | 215 mm |
| Inner diameter 1 | 11 mm |
| Inner diameter 2 | 38 mm |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































