Important compatibility info
| Additional Information 2 | without banjo bolt |
| Length | 588 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with banjo fitting |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Extra Description | Trilobe |
| Length | 98 mm |
| Inner diameter 2 | 80 mm |
| Inner diameter 1 | 24 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Additional Information 2 | with clamps |
Important compatibility info
| Function | Tie Rod End |
| Type | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | FTR5916 |
Important compatibility info
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR5915 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Length | 441 mm |
| Function | Brake Hose |
| Additional Information | with banjo fitting |
| Placement on Vehicle | Front Axle Left |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Additional Information 2 | with banjo bolt |
| Thread Size | M10x1 |
| Mounting Bolt Thread Size | M10x1 |
Important compatibility info
| Inner diameter | 73 mm |
| Function | Rolling Bearing, suspension strut support mount |
| Height | 27 mm |
| Outer diameter | 102 mm |
| Type | Rolling Bearing, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Number of mounting bores | 3 |
| Mounting Type | Bolted |
| Diameter | 21.8 mm |
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Size | M20x1.5 |
| Bore Diameter | 10.3 mm |
| Bore Diameter 2 | 24.5 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
Important compatibility info
| Inner diameter | 14 mm |
| Diameter | 45.02 mm |
| Length | 56.9 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6059 |
| Placement on Vehicle | Rear Axle, Left, Right, outer, Lower |
Important compatibility info
| Function | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Rear Axle |
| Type | Repair Kit, stabiliser coupling rod |
| Inner diameter | 18 mm |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 58 mm |
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
Important compatibility info
| Inner diameter | 24 mm |
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 26 mm |
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL6556HD |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL6557HD |
Important compatibility info
| Thread Measurement 2 | M12X1.75 |
| Thread Size | M12X1.75 |
| Length | 225 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Colour | Black |
| Material | PE (Polyethylene) |
| Inner diameter 2 | 50 mm |
| Inner diameter 1 | 34 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1102S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
| Material | PE (Polyethylene) |
| Inner diameter 1 | 53 mm |
| Colour | Black |
| Inner diameter 2 | 53 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
| Thread Measurement 2 | M12X1.75 |
| Thread Size | M12X1.75 |
| Length | 225 mm |
| Placement on Vehicle | Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Length 1 | 1450 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 348 mm |
| Function | Brake Hose |
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Type | Brake Hose |
| Thread Type | with internal thread, with external thread |
Important compatibility info
| Type | Accessory Kit, disc brake pad |
| Function | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Bore Diameter 1 | 21 mm |
| Function | Ball Joint |
| Number of mounting bores | 3 |
| Mounting Type | Bolted |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Colour | Black |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Inner diameter 1 | 54 mm |
| Inner diameter 2 | 47 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Additional Information 2 | without bolts/screws |
| Number of Rivet Holes | 4 |
| Thread Size | M16x1.5 |
| Bore Diameter | 11 mm |
| Bore Diameter 1 | 17.7 mm |
| Function | Ball Joint |
| Number of mounting bores | 4 |
| Mounting Type | Bolted |
| Bore Diameter 2 | 20.1 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
Important compatibility info
| Additional Information 2 | without banjo bolt |
| Length | 445 mm |
| Function | Brake Hose |
| Thread Type | with internal thread |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Additional Information | with banjo fitting |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Length | 502 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Type | Brake Hose |
| Length | 543 mm |
| Function | Brake Hose |
| Thread Type | with internal thread |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | without banjo bolt |
| Additional Information | with banjo fitting |
Important compatibility info
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 150 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Right |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL6716 |
Important compatibility info
| Axle Joint Length | 328 mm |
| Thread Measurement 2 | M12X1.25 |
| Thread Measurement 1 | M16X1.0 |
| Length | 328 mm |
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Inner Tie Rod |
Important compatibility info
| Inner diameter 1 | 35 mm |
| Colour | Black |
| Inner diameter 2 | 35 mm |
| Material | Silicone |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Important compatibility info
| Function | Tie Rod End |
| Thread Measurement 2 | M14x1.5mm |
| Thread Measurement 1 | M12x1.25mm |
| Placement on Vehicle | Front Axle Left |
| Type | Tie Rod End |
| Length | 182 mm |
| Paired article numbers | FTR6069 |
Important compatibility info
| Function | Tie Rod End |
| Thread Measurement 2 | M14x1.5mm |
| Thread Measurement 1 | M12x1.25mm |
| Type | Tie Rod End |
| Length | 182 mm |
| Paired article numbers | FTR6068 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Brake System | TRW |
| Wear Warning Contact | not prepared for wear warning indicator |
| Height 1 | 47 mm |
| Width 1 | 92 mm |
| Thickness/Strength 1 | 17.1 mm |
| Number of pads | 4 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Length 1 | 244 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Important compatibility info
| Axle Joint Length | 383 mm |
| Thread Measurement 2 | M16X1.5 |
| Length | 383 mm |
| Thread Measurement 1 | M16X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Thread Type | with external thread |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
| Length | 114 mm |
| Inner diameter 2 | 78 mm |
| Inner diameter 1 | 26 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Type | Bellow Kit, drive shaft |
| Material | Polychloroprene (Neoprene) |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 417 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Thread Type | with internal thread |
Important compatibility info
| Additional Information | with banjo fitting |
| Placement on Vehicle | Front Axle Left |
| Length | 391 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Measurement 1 | M10x1 |
| Thread Type | with internal thread |
| Additional Information 2 | without banjo bolt |
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Homologated |
| Brake System | TRW |
| Number of wear indicators | 2 Per Axle |
| Thickness/Strength 1 | 15.2 mm |
| Number of threaded bolts | 4 |
| Function | Brake Pad Set, disc brake |
| Number of pads | 4 |
| Type | Brake Pad Set, disc brake |
| Height 1 | 42.5 mm |
| Width 1 | 95.5 mm |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Diameter | 17.5 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Outer diameter | 107 mm |
| Inner diameter | 70 mm |
| Function | Rolling Bearing, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 36 mm |
| Type | Rolling Bearing, suspension strut support mount |
Important compatibility info
| Function | Brake Hose |
| Length | 305 mm |
| Type | Brake Hose |
| Thread Size | M10x1 |
| Placement on Vehicle | Rear Axle Left |
| Thread Type | with internal thread |
Important compatibility info
| Function | Brake Hose |
| Length | 305 mm |
| Type | Brake Hose |
| Thread Size | M10x1 |
| Placement on Vehicle | Rear Axle Right |
| Thread Type | with internal thread |
Important compatibility info
| Thread Size | M10x1 |
| Additional Information | with banjo fitting |
| Function | Brake Hose |
| Length | 326 mm |
| Thread Type | with internal thread |
| Type | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Placement on Vehicle | Rear Axle Left |
Important compatibility info
| Additional Information | with banjo fitting |
| Thread Size | M10x1 |
| Function | Brake Hose |
| Length | 326 mm |
| Type | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Thread Type | with internal thread |
| Placement on Vehicle | Rear Axle Right |
Important compatibility info
| Function | Brake Hose |
| Length | 541 mm |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Thread Type | with internal thread, with external thread |
Important compatibility info
| Version | Fitting Kit |
| Thread Measurement 1 | M16x1.5 |
| Function | Ball Joint |
| Type | Ball Joint |
| Mounting Type | Pressed |
| Diameter | 47.2 mm |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Bore Diameter 2 | 20 mm |
| Bore Diameter 1 | 17.4 mm |
Important compatibility info
| Length | 500 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
| Placement on Vehicle | Front Axle |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































