Important compatibility info
Material | Grey Cast Iron |
Weight | 0.350 kg |
Function | Wheel Brake Cylinder |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Wheel Brake Cylinder |
Piston Diameter | 19.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 11 mm |
Weight | 0.503 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Cone Size | 16 mm |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (19543)
- 3x Febi Screw (18550)
- 3x Febi Nut (18551)
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Weight | 0.389 kg |
Filter type | Filter Insert |
Width | 144 mm |
Height | 42 mm |
Length | 344 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.010 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.147 kg |
Height | 44 mm |
Outer diameter | 116 mm |
Tightening Torque | 25 Nm |
Type | Cover, fuel filter |
Function | Cover, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Paired article numbers | 183174 |
Spanner Size | 21 |
Internal Thread Size | M16 x 1,5 |
Function | Tie Rod End |
Type | Tie Rod End |
Cone Size 2 | 16 mm |
External Thread Size | M12 x 1,25 |
Weight | 0.743 kg |
Cone Size 1 | 13 mm |
Length | 165 mm |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Additional Information | with lock nut |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 04421 |
Thread Type | with right-hand thread |
Function | Tie Rod End |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Internal Thread Size | M16 x 1,5 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 04422 |
Thread Type | with right-hand thread |
Function | Tie Rod End |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M12 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Weight | 0.03 kg |
Cable Length | 653 mm |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 140 mm |
Inner diameter | 12 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.185 kg |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Weight | 0.03 kg |
Cable Length | 475 mm |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
for OE number | 006 545 10 14 |
Function | Switch, clutch control (cruise control) |
Type | Switch, clutch control (cruise control) |
Weight | 0.09 kg |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear |
Length | 1503 mm |
Function | Cable Pull, parking brake |
Paired article numbers | 33168 |
Weight | 0.480 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.54 kg |
Function | Tie Rod End |
Thickness | 105 mm |
Spanner Size | 17 |
Length | 135 mm |
External Thread Size | M12 x 1,75 |
Internal Thread Size | M16 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Diameter | 1 mm |
Length | 219 mm |
External Thread Size | M12 x 1,75 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with nuts |
Weight | 0.381 kg |
Spanner Size | 18 |
Material | Steel |
Extra Description | ProKit |
Rod/Strut | Coupling Rod |
Thread Length | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.300 kg |
External Thread Size | M12 x 1,75 |
Internal Thread Size | M14 x 2 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod End |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 165 mm |
Weight | 0.08 kg |
Filter type | Filter Insert |
Height | 36 mm |
Length | 226 mm |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Width | 80 mm |
Length | 100 mm |
Function | Bushing, leaf spring |
Weight | 0.278 kg |
Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Placement on Vehicle | Front Axle Left, only fitted on one side |
Length | 1080 mm |
Colour | Black, Grey |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Cable Length | 1010 mm |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.33 kg |
Outer diameter | 41 mm |
Inner diameter | 32 mm |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 2,5 |
Spanner Size | 30 |
Outer diameter | 20 mm |
Weight | 0.356 kg |
Thread Length | 30 mm |
Inner diameter | 4 mm |
Quality/ Grade | 10.9 |
Type | Spring Bolt |
Screw length below head | 127 mm |
Function | Spring Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, Front |
Material | Rubber/Metal |
Outer diameter | 45 mm |
Thickness | 65 mm |
Inner diameter | 12.4 mm |
Weight | 0.269 kg |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Front Axle |
Outer diameter | 60 mm. 33 mm |
Thickness | 87 mm |
Inner diameter | 20 mm |
Function | Mounting, control/trailing arm |
Weight | 0.263 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 3 |
Weight | 0.035 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 785 mm |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Warning Contact, brake pad wear |
Number of Connectors / Ports | 2 |
Length | 1227 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Brake Type | Disc Brake |
Weight | 0.06 kg |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.450 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thread Type | with right-hand thread |
Function | Tie Rod End |
External Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Placement on Vehicle | Rear Axle |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Weight | 0.07 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Weight | 0.145 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 87 mm |
Material | Steel |
Inner diameter | 8 mm |
Rod/Strut | Coupling Rod |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Weight | 0.514 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 213 mm |
Function | Inner Tie Rod |
External Thread Size | M16 x 1,5, M12 x 1 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 560 mm |
Spanner Size | 17 |
Function | Brake Hose |
Weight | 0.15 kg |
Internal Thread Size | M10 x 1 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.091 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 222 mm |
Material | Thermoplast |
Inner diameter 1 | 19 mm |
Inner diameter 2 | 61 mm |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (102113)
- 1x Febi Clamping Clip (33359)
- 1x Febi Clamping Clip (45640)
Important compatibility info
External Thread Size | M12 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Weight | 0.38 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 95 mm |
Thickness | 91 mm |
Spanner Size | 19 |
Function | Tie Rod End |
Additional Information | with lock nut |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.062 kg |
Placement on Vehicle | Front Axle |
Type | Accessory Kit, disc brake pad |
Brake System | ATE |
Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front, Right Front |
Material | Plastic |
Colour | Black |
Weight | 0.49 kg |
Type | Door Handle, interior equipment |
Function | Door Handle, interior equipment |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.370 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Outer diameter | 75 mm |
Inner diameter | 19 mm |
Height | 76 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.246 kg |
Material | Rubber/Metal |
Outer diameter | 77 mm |
Thickness | 41 mm |
Inner diameter | 12 mm |
Placement on Vehicle | Front Axle |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Replaces | 02130 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (02430)
- 1x Febi Rolling Bearing, suspension strut support mount (02132)
Important compatibility info
Weight | 0.190 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Plastic |
Outer diameter | 110 mm |
Inner diameter | 32 mm |
Function | Rolling Bearing, suspension strut support mount |
Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 38 mm |
Width | 214 mm |
Filter type | Filter Insert |
Paired article numbers | 48535 |
Placement on Vehicle | Front, Right |
Function | Air Filter |
Length | 236 mm |
Type | Air Filter |
Weight | 0.18 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.309 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Outer diameter | 45 mm. 26 mm |
Thickness | 91 mm |
Inner diameter | 16 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.18 kg |
Placement on Vehicle | Front, Left |
Length | 236 mm |
Height | 38 mm |
Width | 214 mm |
Filter type | Filter Insert |
Paired article numbers | 48534 |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.101 kg |
Length | 89 mm |
Height | 55 mm |
Width | 89 mm |
Filter type | Filter Insert, Pre-Filter, with water separator |
Chemical Properties | Rape Seed oil resistant |
Function | Fuel filter |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter Set, cabin air |
Width | 115 mm |
Filter type | Pollen Filter |
Length | 227 mm |
Weight | 0.087 kg |
Height | 17.5 mm |
Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 596 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
External Thread Size | M10 x 1 |
Weight | 0.120 kg |
Type | Brake Hose |
Function | Brake Hose |
Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Intake Valve |
Notches / Holes Number | 3 |
Function | Intake Valve |
Length | 101 mm |
Valve stem diameter | 5.5 mm |
Valve head diameter | 28.3 mm |
Weight | 0.035 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.180 kg |
Length | 116 mm |
Material | Thermoplast |
Inner diameter 1 | 32 mm |
Inner diameter 2 | 74 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (27124)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Housing material | Metal |
Internal Thread Size | M16 x 1,5 |
Gasket inner diameter | 61.5 mm |
Gasket outer diameter | 68.5 mm |
Function | Fuel Filter |
Type | Fuel Filter |
Height | 139 mm |
Outer diameter | 81 mm |
Filter type | Spin-on Filter, with water drain screw |
Weight | 0.39 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Outer diameter | 74 mm |
Function | Sealing Cap, oil filler neck |
Weight | 0.045 kg |
Additional Information | with gasket/seal |
Extra Description | febi Plus |
Type | Sealing Cap, oil filler neck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Outer diameter | 60 mm |
Thickness | 75 mm |
Inner diameter | 18 mm |
Weight | 0.25 kg |
Placement on Vehicle | Front, Rear Axle Left, Rear Axle Right |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.1 kg |
Outer diameter | 23 mm |
Opening Temperature | 95 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Spanner Size | 22 |
Colour | Grey |
Number of Connectors / Ports | 1 |
Shifting Points | 0.5 bar |
Function | Oil Pressure Switch |
Screw length below head | 13 mm |
Type | Oil Pressure Switch |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pressure Switch (37504)
- 1x Febi Seal Ring, oil pressure switch (37505)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023