Important compatibility info
Length | 300 mm |
Paired article numbers | 27196 |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left |
Weight | 0.358 kg |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 2 | 78 mm |
Length | 85 mm |
Function | Bellow Kit, drive shaft |
Placement on Vehicle | Wheel Side, Front Axle |
Type | Bellow Kit, drive shaft |
Weight | 0.21 kg |
Material | Thermoplast |
Inner diameter 1 | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14768)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Width of castor bearing surface | 25 mm |
Outer diameter | 50 mm |
Inner diameter | 10 mm |
Weight | 0.136 kg |
Material | Plastic |
Function | Deflection Pulley/Guide Pulley, timing belt |
Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.11 kg |
Opening Temperature | 80 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Aluminium |
Function | Wheel Brake Cylinder |
Weight | 0.097 kg |
Piston Diameter | 14.3 mm |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Placement on Vehicle | Rear Axle Left, Lower, inner, Rear Axle Right |
Length | 38 mm |
Width | 40 mm |
Material | Rubber/Metal |
Outer diameter | 40 mm |
Thickness | 38 mm |
Inner diameter | 11.6 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Placement on Vehicle | Rear Axle |
Material | Steel |
Outer diameter | 195 mm |
Thickness | 11.5 mm |
Inner diameter | 156 mm |
Surface | Zinc-coated |
Number of Teeth, ABS ring | 100 |
Function | Sensor Ring, ABS |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.17 kg |
Type | Air Filter |
Filter type | Filter Insert |
Height | 42 mm |
Length | 270 mm |
Function | Air Filter |
Width | 147 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.22 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 137 mm |
Material | Steel |
Spanner Size | 12, 14 |
Rod/Strut | Coupling Rod |
Thread Length | 21 mm |
Pipe Diameter | 9 mm |
Function | Link/Coupling Rod, stabiliser bar |
Replaces | 41616 |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with washers |
Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 160 mm |
Weight | 0.24 kg |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Paired article numbers | 15726 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.500 kg |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
External Thread Size | M14 x 1,5, M42 x 1,5 |
Function | Ball Joint |
Cone Size | 18 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 515 mm |
Weight | 0.090 kg |
Type | Brake Hose |
Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.143 kg |
Placement on Vehicle | transmission sided |
Length | 92 mm |
Material | Thermoplastic polyester elastomer |
Inner diameter 2 | 63 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172383)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Outer diameter | 32 mm |
Thickness | 48 mm |
Inner diameter | 12 mm |
Function | Mounting, stabiliser bar |
Placement on Vehicle | Rear Axle |
Length | 32 mm |
Width | 32 mm |
Material | Rubber |
Type | Mounting, stabiliser bar |
Weight | 0.150 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 380 mm |
Spanner Size | 17 |
Thread Length | 17 mm |
Function | Brake Hose |
Weight | 0.084 kg |
Internal Thread Size | M10 x 1 |
External Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 235 mm |
Width | 72.5 mm |
Function | Protective Cap/Bellow, shock absorber |
Type | Protective Cap/Bellow, shock absorber |
Additional Information | with bump stop |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Weight | 0.280 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 141 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Surface | Zinc-coated |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Weight | 0.1 kg |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Dipstick |
Outer Length | 754 mm |
Function | Oil Dipstick |
Length from grip collar to max. marking | 694 mm |
Length from grip collar to min. marking | 717 mm |
Weight | 0.028 kg |
Extra Description | febi Plus |
Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Placement on Vehicle | Front Axle, Rear |
Material | FPM (fluoride rubber) |
Outer diameter | 97 mm |
Thickness | 10 mm. 18 mm |
Inner diameter | 52 mm |
Function | Shaft Seal, differential |
Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023