Important compatibility info
Outer diameter | 178 mm |
Inner diameter | 140 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Steel |
Number of Teeth, ABS ring | 100 |
Function | Sensor Ring, ABS |
Weight | 0.18 kg |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.205 kg |
Length | 93 mm |
Material | Rubber |
Inner diameter 1 | 25 mm |
Inner diameter 2 | 76 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172926)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Function | Cable Pull, parking brake |
Length | 1840 mm |
Brake Type | Disc Brake |
Type | Cable Pull, parking brake |
Weight | 0.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sleeve, nozzle holder |
Length | 106 mm |
Inner diameter 1 | 22 mm |
Inner diameter 2 | 8 mm |
Thickness | 25 mm |
Material | Copper |
Width | 25 mm |
Weight | 0.084 kg |
Outer diameter 1 | 25 mm |
Outer diameter 2 | 12 mm |
Type | Sleeve, nozzle holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Wheel Side |
Material | Rubber |
Inner diameter 1 | 25 mm |
Inner diameter 2 | 63 mm |
Function | Bellow Kit, drive shaft |
Weight | 0.507 kg |
Type | Bellow Kit, drive shaft |
Length | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Molybdenum Grease (08414)
Important compatibility info
Rod/Strut | Coupling Rod |
Paired article numbers | 106863 |
Spanner Size | 21 |
Thickness | 66.75 mm |
Material | Steel |
Function | Link/Coupling Rod, stabiliser bar |
Thread Length | 38 mm |
External Thread Size | M14 x 2 |
Length | 190 mm |
Placement on Vehicle | Rear Axle Right |
Weight | 0.625 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 211 mm |
Diameter | 1 mm |
Material | Steel |
Inner diameter | 12 mm |
Rod/Strut | Coupling Rod |
Weight | 0.654 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Length | 48 mm |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Outer diameter | 40 mm |
Inner diameter | 12.2 mm |
Function | Mounting, control/trailing arm |
Weight | 0.214 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 171536 |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Weight | 0.52 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Width | 259 mm |
Length | 344 mm |
Height | 64 mm |
Weight | 0.297 kg |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 171535 |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Weight | 0.52 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Accessory Kit, disc brake pad |
Placement on Vehicle | Front Axle |
Type | Accessory Kit, disc brake pad |
Weight | 0.119 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.030 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Cable Length | 695 mm |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
External Thread Size | M10 x 1,5 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Spanner Size | 15 |
Rod/Strut | Coupling Rod |
Thread Length | 31 mm |
Weight | 0.341 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Length | 185 mm |
Diameter | 1 mm |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.261 kg |
Thickness | 66 mm |
Placement on Vehicle | Rear Axle, Rear |
Width | 54.5 mm |
Outer diameter | 66 mm |
Inner diameter | 14 mm. 33 mm |
Function | Mounting, differential |
Material | Rubber/Metal |
Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.030 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Cable Length | 732 mm |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Filter, cabin air |
Filter type | Activated Carbon Filter |
Width | 231 mm |
Height | 32 mm |
Weight | 0.290 kg |
Function | Filter, cabin air |
Length | 246 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.182 kg |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Length | 247 mm |
Height | 73 mm |
Width | 202 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Weight | 0.09 kg |
Replaces | 03490 |
Voltage | 12 V |
Function | Washer Fluid Pump, headlight cleaning |
Type | Washer Fluid Pump, headlight cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 119 mm |
Inner diameter | 80 mm |
Type | Air Filter |
Function | Air Filter |
Weight | 0.297 kg |
Filter type | Filter Insert |
Height | 335 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 197 mm |
Outer diameter | 88 mm |
Filter type | In-Line Filter |
Function | Fuel filter |
Type | Fuel filter |
Pipe Diameter | 10 mm |
Weight | 0.390 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Weight | 0.53 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 88 mm |
Inner diameter 1 | 24 mm |
Length | 84 mm |
Replaces | 38337 |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Weight | 0.56 kg |
External Thread Size | M14 x 1,5 |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 284.8 mm |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 109 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Weight | 0.110 kg |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (03335)
- 1x Febi Spring Washer (03336)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
External Thread Size | M12 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Weight | 0.38 kg |
Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
Length | 106 mm |
Thickness | 76 mm |
Spanner Size | 17 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 79 °C |
Heating / Cooling | with vent hole |
Weight | 0.113 kg |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (24643)
- 1x Febi Gasket, water pump (03505)
Important compatibility info
Function | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Weight | 0.031 kg |
Length | 1460 mm |
Replaces | 16931 |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 60 mm |
Material | FPM (fluoride rubber) |
Additional Information 2 | with mounting sleeve |
Height | 8.5 mm |
Placement on Vehicle | frontal sided |
Inner diameter | 44 mm |
Weight | 0.03 kg |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chemical Properties | Elastic |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Length | 701 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Weight | 0.062 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.075 kg |
Length | 95 mm |
Width | 95 mm |
Thickness | 27 mm |
Inner diameter 1 | 77 mm |
Colour | Black |
Outer diameter 1 | 93 mm |
Type | Cap, power steering fluid reservoir |
Function | Cap, power steering fluid reservoir |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Length | 294 mm |
Spanner Size | 30 |
Weight | 0.591 kg |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
External Thread Size | M14 x 1,5, M16 x 1 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.110 kg |
Placement on Vehicle | Rear Axle |
Length | 134 mm |
Outer diameter 1 | 14 mm |
Outer diameter 2 | 17 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.33 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 89 mm |
Thickness | 77 mm |
Spanner Size | 19 |
Function | Tie Rod End |
Internal Thread Size | M12 x 1,5 |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.370 kg |
Pipe Diameter | 9 mm |
Material | Steel |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 115 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information | with nuts |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 65 mm |
Material | Steel |
Paired article numbers | 27359 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 12 mm |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Weight | 0.390 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.385 kg |
Placement on Vehicle | Rear Axle |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.390 kg |
Placement on Vehicle | Front Axle Left |
Length | 65 mm |
Material | Steel |
Paired article numbers | 27360 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 12 mm |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Weight | 0.07 kg |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 174 mm |
Height | 30 mm |
Width | 140 mm |
Filter type | Pollen Filter |
Function | Filter Set, cabin air |
Weight | 0.05 kg |
Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rated Power | 70 W |
Bulb Fitment Code | H1 |
Fulfils ECE norm | R37 |
Type | Bulb / Bulb, front fog light |
Voltage | 24 V |
Bulb Type | H1 |
Function | Bulb / Bulb, front fog light |
Weight | 0.006 kg |
Base design light bulb | P14.5s |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.290 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Outer diameter | 65 mm |
Thickness | 80 mm |
Inner diameter | 12 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.392 kg |
Placement on Vehicle | Front Axle |
Length | 115 mm |
Width | 90 mm |
Material | Rubber |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Ignition Switch |
Number of Connectors / Ports | 7 |
Weight | 0.051 kg |
Type | Ignition Switch |
Control Type | Rotary Operation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Bulb Type | H3 |
Bulb Fitment Code | H3 |
Weight | 0.006 kg |
Function | Bulb / Bulb, front fog light |
Type | Bulb / Bulb, front fog light |
Rated Power | 70 W |
Fulfils ECE norm | R37 |
Base design light bulb | PK22s |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Height | 52 mm |
Width | 240 mm |
Length | 241 mm |
Filter type | Filter Insert |
Weight | 0.40 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.149 kg |
Function | V-Ribbed Belt |
Number of Ribs | 6 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1463 mm |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 297 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Thread Length | 24.5 mm |
DIN / ISO | 985 |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.491 kg |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Cone Size | 22 mm |
Mounting points diameter | 11 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Outer diameter | 40.2 mm |
Type | Mounting, control/trailing arm |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Length | 133 mm |
Material | Rubber/Metal |
Weight | 0.346 kg |
Hole Spacing | 105 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.35 kg |
Type | Mounting, support frame/subframe |
Placement on Vehicle | both sides, Lower, Front |
Length | 98 mm |
Outer diameter 1 | 13 mm |
Outer diameter 2 | 52.5 mm |
Function | Mounting, support frame/subframe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023