Important compatibility info
Length | 109 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Weight | 0.110 kg |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (03335)
- 1x Febi Spring Washer (03336)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Outer diameter | 60 mm |
Material | FPM (fluoride rubber) |
Additional Information 2 | with mounting sleeve |
Height | 8.5 mm |
Placement on Vehicle | frontal sided |
Inner diameter | 44 mm |
Weight | 0.03 kg |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Weight | 0.031 kg |
Length | 1460 mm |
Replaces | 16931 |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Weight | 0.53 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 88 mm |
Inner diameter 1 | 24 mm |
Length | 84 mm |
Replaces | 38337 |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Height | 197 mm |
Outer diameter | 88 mm |
Filter type | In-Line Filter |
Function | Fuel filter |
Type | Fuel filter |
Pipe Diameter | 10 mm |
Weight | 0.390 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Weight | 0.56 kg |
External Thread Size | M14 x 1,5 |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 284.8 mm |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 79 °C |
Heating / Cooling | with vent hole |
Weight | 0.113 kg |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (24643)
- 1x Febi Gasket, water pump (03505)
Important compatibility info
Outer diameter | 119 mm |
Inner diameter | 80 mm |
Type | Air Filter |
Function | Air Filter |
Weight | 0.297 kg |
Filter type | Filter Insert |
Height | 335 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Length | 294 mm |
Spanner Size | 30 |
Weight | 0.591 kg |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
External Thread Size | M14 x 1,5, M16 x 1 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.33 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 89 mm |
Thickness | 77 mm |
Spanner Size | 19 |
Function | Tie Rod End |
Internal Thread Size | M12 x 1,5 |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.385 kg |
Placement on Vehicle | Rear Axle |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Weight | 0.07 kg |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.075 kg |
Length | 95 mm |
Width | 95 mm |
Thickness | 27 mm |
Inner diameter 1 | 77 mm |
Colour | Black |
Outer diameter 1 | 93 mm |
Type | Cap, power steering fluid reservoir |
Function | Cap, power steering fluid reservoir |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chemical Properties | Elastic |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Length | 701 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Weight | 0.062 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 65 mm |
Material | Steel |
Paired article numbers | 27359 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 12 mm |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Weight | 0.390 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.390 kg |
Placement on Vehicle | Front Axle Left |
Length | 65 mm |
Material | Steel |
Paired article numbers | 27360 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 12 mm |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.110 kg |
Placement on Vehicle | Rear Axle |
Length | 134 mm |
Outer diameter 1 | 14 mm |
Outer diameter 2 | 17 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.370 kg |
Pipe Diameter | 9 mm |
Material | Steel |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 115 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information | with nuts |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Height | 52 mm |
Width | 240 mm |
Length | 241 mm |
Filter type | Filter Insert |
Weight | 0.40 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.490 kg |
Height | 35 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Length | 354 mm |
Width | 236 mm |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023