Important compatibility info
Weight | 0.421 kg |
Length | 82 mm |
Material | Rubber |
Inner diameter 1 | 22 mm |
Inner diameter 2 | 83 mm |
Function | Bellow Kit, drive shaft |
Placement on Vehicle | Wheel Side, Front Axle Right |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (02414)
- 1x Febi Circlip (03185)
- 1x Febi Spring Washer (07254)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38757)
- 1x Febi Screw (03634)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Weight | 0.51 kg |
Placement on Vehicle | Right Rear |
Length | 2160 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Paired article numbers | 04671 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Weight | 0.105 kg |
Replaces | 04800 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PTFE (polytetrafluoroethylene) |
Placement on Vehicle | frontal sided |
Width | 8 mm |
Function | Shaft Seal, crankshaft |
Inner diameter | 55 mm |
Outer diameter | 68 mm |
Weight | 0.02 kg |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.390 kg |
Cone Size | 15.8 mm |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Additional Information | with lock nut |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.370 kg |
Additional Information | with rubber-metal mounts |
Placement on Vehicle | Front Axle |
Inner diameter | 12 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (12064)
- 2x Febi Bushing, stabiliser coupling rod (12065)
Important compatibility info
Weight | 0.474 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 150 mm |
Rod/Strut | Coupling Rod |
Bolt Head/Nut Design | Male Hex, Hexagon Socket |
Function | Link/Coupling Rod, stabiliser bar |
Outer diameter | 35 mm |
External Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 10658 |
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front Axle Left |
Weight | 0.426 kg |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Thickness | 119 mm |
Placement on Vehicle | Rear Axle |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.480 kg |
Additional Information | with counter nut |
Length | 241 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
External Thread Size | M16 x 1,5, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 22 mm |
Material | Plastic |
Outer diameter | 65 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
for OE number | 640 202 04 19 |
Weight | 0.104 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 20 mm |
Number of Teeth | 75 |
Function | Timing Belt |
Belts | with trapezoidal tooth profile |
Weight | 0.5 kg |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.405 kg |
Placement on Vehicle | Front Axle Left |
Length | 120 mm |
Paired article numbers | 06966 |
Function | Tie Rod End |
Additional Information | with lock nut |
Type | Tie Rod End |
External Thread Size | M14 x 1,5, M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Length | 410 mm |
Width | 223 mm |
Material | NBR (nitrile butadiene rubber) |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | frontal sided |
Height | 6 mm |
Outer diameter | 52 mm |
Inner diameter | 40 mm |
Weight | 0.013 kg |
Type | Shaft Seal, crankshaft |
Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 9 mm |
Weight | 0.380 kg |
Placement on Vehicle | Front Axle Left |
Length | 263 mm |
Material | Steel |
Paired article numbers | 24928 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M12 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Placement on Vehicle | Front Axle Right |
Length | 285 mm |
Paired article numbers | 28671 |
Rod/Strut | Coupling Rod |
Thread Length | 26 mm |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M12 x 1,75 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.155 kg |
Placement on Vehicle | Wheel Side, Rear Axle |
Length | 77 mm |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 23 mm |
Inner diameter 2 | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (36553)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Material | Rubber/Metal, Aluminium |
Outer diameter | 35 mm. 24 mm |
Thickness | 66 mm |
Inner diameter | 12 mm |
Placement on Vehicle | Rear Axle Upper, inner |
Weight | 0.087 kg |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Placement on Vehicle | Front Axle Left |
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Paired article numbers | 174216 |
Weight | 0.172 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023