Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.244 kg |
| Placement on Vehicle | Lower Front Axle, Rear |
| Outer diameter | 59 mm. 24 mm |
| Thickness | 55 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 150 mm |
| Inner diameter 1 | 24 mm |
| Inner diameter 2 | 95 mm |
| Function | Bellow Kit, drive shaft |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Weight | 0.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14298)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45646)
- 2x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Material | Plastic, PA (polyamide) |
| Function | Guide, timing chain |
| Friction Lining Material | Plastic |
| Placement on Vehicle | Left |
| Weight | 0.118 kg |
| Type | Guide, timing chain |
| Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Weight | 0.070 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 300 mm |
| Function | Inner Tie Rod |
| Weight | 0.615 kg |
| External Thread Size | M12 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.095 kg |
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.248 kg |
| Length | 253 mm |
| Height | 36 mm |
| Width | 217 mm |
| Filter type | Filter Insert, Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.335 kg |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Width | 105 mm |
| Material | Rubber/Metal |
| Outer diameter | 55 mm. 26 mm |
| Thickness | 45 mm |
| Inner diameter | 20 mm. 11 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Inner diameter | 27 mm |
| Function | Mounting, stabiliser bar |
| Material | Rubber |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
| Weight | 0.08 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Rear, Left Rear, Right Rear |
| Length | 1615 mm. 805 mm |
| Function | Cable Pull, parking brake |
| Weight | 0.39 kg |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.12 kg |
| Width | 15 mm |
| Number of Teeth | 129 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | PU (Polyurethane) |
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.16 kg |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12488)
- 2x Febi Protective Cap/Bellow, shock absorber (12478)
£14.06
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 0.310 kg |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 17 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.22 kg |
| Length | 250 mm |
| Height | 35 mm |
| Width | 180 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.055 kg |
| Placement on Vehicle | Rear Axle |
| Length | 1243 mm |
| Colour | Black, Grey |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.200 kg |
| Length | 1330 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 9 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | FPM (fluoride rubber) |
| Outer diameter | 125 mm |
| Thickness | 12 mm |
| Inner diameter | 105 mm |
| Function | Shaft Seal, manual transmission |
| Weight | 0.66 kg |
| Type | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chemical Properties | Elastic |
| Weight | 0.11 kg |
| Length | 1029 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.194 kg |
| Material | Rubber/Metal |
| Function | Flange, carburettor |
| Type | Flange, carburettor |
| Replaces | 12129 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Cooling Hose | from radiator to water pipe |
| Weight | 0.36 kg |
| Function | Radiator Hose |
| Type | Radiator Hose |
| for OE number | 1351.FR |
| Placement on Vehicle | Lower Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.348 kg |
| Height | 160 mm |
| Width | 102 mm |
| Port / Connector type | DIN Connector |
| Fastening Type | 2-point attachment |
| DIN / ISO | 72591 |
| Number of circuits | 2 |
| Type | Holder, rotating beacon |
| Function | Holder, rotating beacon |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Suspension Rod |
| Material | Steel |
| Length | 310 mm |
| Placement on Vehicle | Front Axle Right |
| Weight | 0.406 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.14 kg |
| Placement on Vehicle | both sides |
| Length | 255 mm |
| Housing Diameter | 15 mm |
| Eject Force | 420 N |
| Stroke | 104 mm |
| Mounting points diameter | 8.3 mm |
| Piston conrod diameter | 6 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 143.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.370 kg |
| Piston Diameter | 22 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Paired article numbers | 23733 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.237 kg |
| Function | Screw Set, gears (timing chain) |
| Type | Screw Set, gears (timing chain) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (101125)
- 4x Febi Sliding Rail Bolts, timing chain (101126)
- 2x Febi Screw (101128)
- 1x Febi Quill, cylinder head (101129)
- 1x Febi Bolt, camshaft gear (46364)
£14.06
Important compatibility info
| Weight | 0.580 kg |
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1666 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Additional Information 2 | with pre-filter |
| Weight | 0.35 kg |
| Filter type | Filter Insert |
| Width | 232 mm |
| Length | 350 mm |
| Height | 44 mm |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.005 kg |
| Function | Sensor, intake air temperature |
| Outer diameter | 10 mm |
| Thickness | 52 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, intake air temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 145 mm |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 98 mm |
| Placement on Vehicle | Front Axle, Wheel Side |
| Weight | 0.25 kg |
| Function | Bellow Kit, drive shaft |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Function | Mount, exhaust system |
| Placement on Vehicle | Catalytic Converter, Soot Particulate Filter |
| Material | Rubber/Metal |
| Type | Mount, exhaust system |
| Weight | 0.287 kg |
| for OE number | 1J0 253 144 H |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 1162 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.175 kg |
| Function | V-Ribbed Belt |
| Number of Ribs | 10 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.600 kg |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 195 mm |
| Material | Metal |
| Rod/Strut | Coupling Rod |
| Surface | Zinc-coated |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.199 kg |
| Length | 70 mm |
| Width | 54 mm |
| Outer diameter | 41 mm |
| Thickness | 54 mm |
| Inner diameter | 16.5 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 100 mm |
| Material | Rubber |
| Inner diameter 2 | 70 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.251 kg |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100429)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
£14.06
Important compatibility info
| Length | 96 mm |
| Function | Linkage, door release |
| Weight | 0.08 kg |
| Type | Linkage, door release |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.43 kg |
| Placement on Vehicle | Rear Axle, Wheel Side, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 100 mm |
| Inner diameter 1 | 21 mm |
| Material | Rubber |
| Length | 96 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03362)
- 1x Febi Clamping Clip (38758)
- 6x Febi Bolt, drive shaft flange (03004)
- 1x Febi Spring Washer (07253)
- 1x Febi Circlip (03335)
- 1x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Weight | 0.28 kg |
| Placement on Vehicle | Lower Right |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.035 kg |
| Number of Connectors / Ports | 2 |
| Switch Point | 95 °C. 90 °C |
| Colour Coding | Blue |
| Function | Temperature Switch, radiator fan |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.03 kg |
| Placement on Vehicle | transmission sided |
| Width | 8.8 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 105 mm |
| Inner diameter | 85 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Replaces | 11813 |
| Additional Information 2 | with mounting sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.312 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
- 1x Febi Suspension Strut Support Mount (47358)
£14.06
Important compatibility info
| Weight | 0.015 kg |
| for OE number | 129 545 02 24 |
| Function | Sensor, coolant level |
| Number of Connectors / Ports | 2 |
| Housing Colour | Black/White |
| Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Shape/Form | rectangular |
| Weight | 0.112 kg |
| Height | 62 mm |
| Length | 90 mm |
| Width | 64 mm |
| Material | Plastic |
| Colour | Black |
| Type | Lift Point Pad, jack |
| Function | Lift Point Pad, jack |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.18 kg |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with fastening material, without ball bearing |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (34391)
- 1x Febi Nut (24375)
- 1x Febi Washer (01965)
£14.06
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | without ball bearing |
| Inner diameter | 11 mm |
| Placement on Vehicle | Rear Axle |
| Replaces | 22986 |
| Weight | 0.28 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Hole Spacing | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.030 kg |
| Thickness | 54 mm |
| Spanner Size | 19 |
| Number of Connectors / Ports | 1 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| for OE number | 006 542 34 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Thickness | 11 mm |
| Placement on Vehicle | frontal sided |
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Weight | 0.052 kg |
| Inner diameter | 78 mm |
| Function | Shaft Seal, crankshaft |
| Outer diameter | 104 mm |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Function | Tie Rod End |
| Length | 110 mm |
| Thickness | 68 mm |
| Spanner Size | 17 |
| Paired article numbers | 42721 |
| Placement on Vehicle | Front Axle Left |
| Weight | 0.4 kg |
| Extra Description | ProKit |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Opening Pressure | 1.2 bar |
| Type | Cap, coolant tank |
| Material | Plastic |
| for OE number | 21360115 |
| Function | Cap, coolant tank |
| Weight | 0.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.48 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 136 mm |
| Paired article numbers | 26152 |
| Function | Tie Rod End |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.215 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 108 mm |
| Inner diameter 1 | 24 mm |
| Material | Rubber |
| Length | 129 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14069)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
£14.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023