Important compatibility info
Weight | 0.237 kg |
Function | Screw Set, gears (timing chain) |
Type | Screw Set, gears (timing chain) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (101125)
- 4x Febi Sliding Rail Bolts, timing chain (101126)
- 2x Febi Screw (101128)
- 1x Febi Quill, cylinder head (101129)
- 1x Febi Bolt, camshaft gear (46364)
Important compatibility info
External Thread Size | M10 x 1,5 |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Suspension Rod |
Material | Steel |
Length | 310 mm |
Placement on Vehicle | Front Axle Right |
Weight | 0.406 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.035 kg |
Length | 396 mm |
Height | 38 mm |
Width | 177 mm |
Material | NBR (nitrile butadiene rubber) |
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.215 kg |
Placement on Vehicle | Front Axle, transmission sided |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 108 mm |
Inner diameter 1 | 24 mm |
Material | Rubber |
Length | 129 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14069)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.194 kg |
Material | Rubber/Metal |
Function | Flange, carburettor |
Type | Flange, carburettor |
Replaces | 12129 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Pressure | 1.2 bar |
Type | Cap, coolant tank |
Material | Plastic |
for OE number | 21360115 |
Function | Cap, coolant tank |
Weight | 0.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Placement on Vehicle | Right |
Length | 362 mm |
Width | 165 mm |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Weight | 1.0 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Ball Joint |
Function | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 0.310 kg |
Additional Information | with lock nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Ball Joint |
Cone Size | 17 mm |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.248 kg |
Length | 253 mm |
Height | 36 mm |
Width | 217 mm |
Filter type | Filter Insert, Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.005 kg |
Function | Sensor, intake air temperature |
Outer diameter | 10 mm |
Thickness | 52 mm |
Number of Connectors / Ports | 2 |
Type | Sensor, intake air temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 100 mm |
Material | Rubber |
Inner diameter 2 | 70 mm |
Function | Bellow Kit, drive shaft |
Weight | 0.251 kg |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100429)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Material | Aluminium |
Additional Information 2 | without ball bearing |
Inner diameter | 11 mm |
Placement on Vehicle | Rear Axle |
Replaces | 22986 |
Weight | 0.28 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Hole Spacing | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.264 kg |
Additional Information 2 | with oil sump gasket |
Height | 46 mm |
Length | 244 mm |
Width | 152 mm |
Function | Hydraulic Filter Kit, automatic transmission |
Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Weight | 0.158 kg |
Outer diameter | 82 mm. 64 mm |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 34 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Length | 104.5 mm |
Valve head diameter | 24.54 mm |
Notches / Holes Number | 1 |
Function | Exhaust Valve |
Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Function | Gasket, cylinder head cover |
Weight | 0.070 kg |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 80 |
Function | Nut, kingpin |
Thickness | 21.6 mm |
Type | Nut, kingpin |
Weight | 0.277 kg |
Internal Thread Size | M60 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cap, fuel tank |
Inner diameter | 60 mm |
Material | Plastic |
Extra Description | febi Plus |
Weight | 0.096 kg |
Type | Cap, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Function | Stop Light Switch |
Weight | 0.027 kg |
Housing Colour | black |
Type | Stop Light Switch |
Replaces | 23618 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1162 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.175 kg |
Function | V-Ribbed Belt |
Number of Ribs | 10 |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 11 mm |
Placement on Vehicle | frontal sided |
Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
Weight | 0.052 kg |
Inner diameter | 78 mm |
Function | Shaft Seal, crankshaft |
Outer diameter | 104 mm |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.030 kg |
Thickness | 54 mm |
Spanner Size | 19 |
Number of Connectors / Ports | 1 |
Function | Sensor, coolant temperature |
Type | Sensor, coolant temperature |
for OE number | 006 542 34 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
Weight | 0.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter Set, cabin air |
Type | Filter Set, cabin air |
Weight | 0.160 kg |
Width | 105 mm |
Filter type | Pollen Filter |
Height | 26 mm |
Length | 250.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Number of Connectors / Ports | 2 |
Switch Point | 92 °C. 97 °C |
Function | Temperature Switch, radiator fan |
External Thread Size | M22 x 1,5 |
Type | Temperature Switch, radiator fan |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 120 mm |
Inner diameter | 15 mm |
Weight | 0.780 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 49 mm |
Additional Information 2 | without ball bearing |
for OE number | 03 44 543 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.095 kg |
Opening Temperature | 92 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Material | Plastic |
Colour | Black |
Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with wipe interval function |
Function | Steering Column Switch |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Length | 310 mm |
Material | Steel |
Rod/Strut | Suspension Rod |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.406 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.259 kg |
Function | Hydraulic Filter, automatic transmission |
Height | 73 mm |
Type | Hydraulic Filter, automatic transmission |
Width | 126 mm |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.348 kg |
Height | 160 mm |
Width | 102 mm |
Port / Connector type | DIN Connector |
Fastening Type | 2-point attachment |
DIN / ISO | 72591 |
Number of circuits | 2 |
Type | Holder, rotating beacon |
Function | Holder, rotating beacon |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.665 kg |
Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
Function | Ball Joint |
Cone Size | 16 mm |
Extra Description | ProKit |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Function | Tie Rod End |
Length | 110 mm |
Thickness | 68 mm |
Spanner Size | 17 |
Paired article numbers | 42721 |
Placement on Vehicle | Front Axle Left |
Weight | 0.4 kg |
Extra Description | ProKit |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 0.092 kg |
Height | 38 mm |
Outer diameter | 42 mm |
Inner diameter | 11 mm |
Function | Bush, driver cab suspension |
Type | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
External Thread Size | M10 x 1,5 |
Spanner Size | 17 |
Additional Information 2 | with nut |
Length | 57 mm |
Function | Ball Head, gearshift linkage |
Type | Ball Head, gearshift linkage |
Weight | 0.135 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 150 mm |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 95 mm |
Function | Bellow Kit, drive shaft |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Weight | 0.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14298)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45646)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.904 kg |
Placement on Vehicle | Front Axle |
Length | 72 mm |
Width | 60.6 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Valve stem diameter | 6.9 mm |
Valve head diameter | 33.5 mm |
Function | Intake Valve |
Length | 113.3 mm |
Weight | 0.075 kg |
Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head cover |
Thickness | 9 mm |
Material | NBR (nitrile butadiene rubber) |
Width | 313 mm |
Length | 505 mm |
Weight | 0.052 kg |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 0.312 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Additional Information 2 | with ball bearing |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
- 1x Febi Suspension Strut Support Mount (47358)
Important compatibility info
Weight | 0.4 kg |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front Axle Right |
Length | 110 mm |
Thickness | 68 mm |
Spanner Size | 17 |
Paired article numbers | 42720 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.216 kg |
Length | 395 mm |
Height | 30 mm |
Width | 260 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.48 kg |
Placement on Vehicle | Front Axle Right |
Length | 136 mm |
Paired article numbers | 26152 |
Function | Tie Rod End |
Additional Information | with counter nut |
Extra Description | ProKit |
Type | Tie Rod End |
External Thread Size | M12 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.255 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling Hose | from coolant regulator housing to engine cooler |
Function | Radiator Hose |
Type | Radiator Hose |
for OE number | 1351.RE SK |
Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.335 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Width | 105 mm |
Material | Rubber/Metal |
Outer diameter | 55 mm. 26 mm |
Thickness | 45 mm |
Inner diameter | 20 mm. 11 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Replaces | 41710 |
Weight | 0.55 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 15.1 mm |
Mounting points diameter | 12.2 mm |
Type | Ball Joint |
Function | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.48 kg |
Placement on Vehicle | Front Axle Left |
Length | 136 mm |
Paired article numbers | 26153 |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M14 x 1,5 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | HNBR (hydrogenated nitrile butadiene rubber) |
Weight | 0.07 kg |
Width | 17 mm |
Number of Teeth | 95 |
Belts | with rounded tooth profile |
Function | Timing Belt |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.03 kg |
Placement on Vehicle | transmission sided |
Width | 8.8 mm |
Material | PTFE (polytetrafluoroethylene) |
Outer diameter | 105 mm |
Inner diameter | 85 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Replaces | 11813 |
Additional Information 2 | with mounting sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023