Important compatibility info
Weight | 0.348 kg |
Height | 160 mm |
Width | 102 mm |
Port / Connector type | DIN Connector |
Fastening Type | 2-point attachment |
DIN / ISO | 72591 |
Number of circuits | 2 |
Type | Holder, rotating beacon |
Function | Holder, rotating beacon |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | FPM (fluoride rubber) |
Outer diameter | 125 mm |
Thickness | 12 mm |
Inner diameter | 105 mm |
Function | Shaft Seal, manual transmission |
Weight | 0.66 kg |
Type | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Material | Thermoplast |
Weight | 0.215 kg |
Type | Bellow Kit, drive shaft |
Length | 107 mm |
Inner diameter 1 | 40 mm |
Inner diameter 2 | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (45645)
- 1x Febi Clamping Clip (38760)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Circlip (24138)
Important compatibility info
Spanner Size | 80 |
Function | Nut, kingpin |
Thickness | 21.6 mm |
Type | Nut, kingpin |
Weight | 0.277 kg |
Internal Thread Size | M60 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Length | 95 mm |
Material | Plastic |
Outer diameter | 30 mm |
Colour | Black |
Number of Connectors / Ports | 2 |
Function | Sensor, coolant level |
Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Number of Connectors / Ports | 2 |
Switch Point | 92 °C. 97 °C |
Function | Temperature Switch, radiator fan |
External Thread Size | M22 x 1,5 |
Type | Temperature Switch, radiator fan |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 0.310 kg |
Additional Information | with lock nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Ball Joint |
Cone Size | 17 mm |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.600 kg |
Additional Information | with nuts |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 195 mm |
Material | Metal |
Rod/Strut | Coupling Rod |
Surface | Zinc-coated |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.580 kg |
Placement on Vehicle | Left Rear, Right Rear |
Length | 1666 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Placement on Vehicle | Rear |
Material | FPM (fluoride rubber) |
Outer diameter | 75 mm |
Thickness | 10 mm |
Inner diameter | 43 mm |
Function | Shaft Seal, differential |
Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.015 kg |
for OE number | 129 545 02 24 |
Function | Sensor, coolant level |
Number of Connectors / Ports | 2 |
Housing Colour | Black/White |
Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.215 kg |
Placement on Vehicle | Front Axle, transmission sided |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 108 mm |
Inner diameter 1 | 24 mm |
Material | Rubber |
Length | 129 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14069)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Outer diameter | 120 mm |
Inner diameter | 15 mm |
Weight | 0.780 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 49 mm |
Additional Information 2 | without ball bearing |
for OE number | 03 44 543 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Pressure | 1.2 bar |
Type | Cap, coolant tank |
Material | Plastic |
for OE number | 21360115 |
Function | Cap, coolant tank |
Weight | 0.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.030 kg |
Thickness | 54 mm |
Spanner Size | 19 |
Number of Connectors / Ports | 1 |
Function | Sensor, coolant temperature |
Type | Sensor, coolant temperature |
for OE number | 006 542 34 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Length | 310 mm |
Material | Steel |
Rod/Strut | Suspension Rod |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.406 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.167 kg |
Length | 1427 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Replaces | 41710 |
Weight | 0.55 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 15.1 mm |
Mounting points diameter | 12.2 mm |
Type | Ball Joint |
Function | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Valve stem diameter | 6.9 mm |
Valve head diameter | 33.5 mm |
Function | Intake Valve |
Length | 113.3 mm |
Weight | 0.075 kg |
Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Width | 17 mm |
Number of Teeth | 104 |
Belts | with rounded tooth profile |
Function | Timing Belt |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 153 mm |
Type | Shaft Seal, crankshaft |
Material | PTFE (polytetrafluoroethylene) |
Weight | 0.08 kg |
Width | 13 mm |
Placement on Vehicle | frontal sided |
Inner diameter | 135 mm |
Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Placement on Vehicle | Right |
Length | 362 mm |
Width | 165 mm |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.244 kg |
Placement on Vehicle | Lower Front Axle, Rear |
Outer diameter | 59 mm. 24 mm |
Thickness | 55 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wet Boiling Point | 250 °C |
Weight | 0.165 kg |
Length | 1215 mm |
Extra Description | febi Plus |
Function | Oil Dipstick, automatic transmission |
Length from grip collar to min. marking | 1144 mm. 1095 mm |
Length from grip collar to max. marking | 1133 mm. 1089 mm |
Colour | Red |
Type | Oil Dipstick, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Function | Tie Rod End |
Length | 110 mm |
Thickness | 68 mm |
Spanner Size | 17 |
Paired article numbers | 42721 |
Placement on Vehicle | Front Axle Left |
Weight | 0.4 kg |
Extra Description | ProKit |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Material | Plastic |
Colour | Black |
Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with wipe interval function |
Function | Steering Column Switch |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Function | Stop Light Switch |
Weight | 0.027 kg |
Housing Colour | black |
Type | Stop Light Switch |
Replaces | 23618 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic, PA (polyamide) |
Function | Guide, timing chain |
Friction Lining Material | Plastic |
Placement on Vehicle | Left |
Weight | 0.118 kg |
Type | Guide, timing chain |
Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Left Rear, Right Rear |
Length | 1615 mm. 805 mm |
Function | Cable Pull, parking brake |
Weight | 0.39 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.255 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling Hose | from coolant regulator housing to engine cooler |
Function | Radiator Hose |
Type | Radiator Hose |
for OE number | 1351.RE SK |
Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.394 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Length | 90 mm |
Width | 47 mm |
Material | Rubber/Metal |
Thickness | 44 mm |
Inner diameter | 17 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.86 kg |
Length | 230 mm |
Outer diameter | 8.5 mm |
Inner diameter | 3.2 mm |
Pressure | 362 bar |
Function | Hose Line, driver cab tilting device |
External Thread Size | M14 x 1,5 |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | ACM (Polyacrylate) |
Weight | 0.037 kg |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.13 kg |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Number of Ribs | 6 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1237 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 98 mm |
Inner diameter | 65 mm |
Weight | 0660.0 kg |
Internal Thread Size | M16 x 1,5 |
Function | Coolant Filter |
Height | 142 mm |
Type | Coolant Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Activated Carbon Filter |
Width | 207 mm |
Function | Filter, cabin air |
Length | 276 mm |
Height | 27 mm |
Type | Filter, cabin air |
Weight | 0.200 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Resistor, interior blower |
for OE number | 1267.E3 |
Type | Resistor, interior blower |
Weight | 0.053 kg |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.523 kg |
Placement on Vehicle | Rear Axle Left, Lower, inner, Rear Axle Right |
Width | 64 mm |
Material | Rubber/Metal |
Outer diameter | 70 mm |
Inner diameter | 16 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Outer diameter | 61.8 mm |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Thickness | 62 mm |
Inner diameter | 10 mm |
Weight | 0.188 kg |
Material | Rubber/Metal |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.031 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 225 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.020 kg |
Function | Attachment Parts Set, thermostat housing |
Type | Attachment Parts Set, thermostat housing |
Additional Information 2 | with seal ring, with screw set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, water pump breather (30073)
- 2x Febi Seal Ring (30074)
Important compatibility info
Cone Size | 20 mm |
Mounting points diameter | 10.5 mm |
Weight | 0.475 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information | with fastening/mounting material |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | V-Ribbed Belt |
Number of Ribs | 7 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 945 mm |
Weight | 0.101 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.177 kg |
Additional Information 2 | with cap |
Material | Plastic |
Function | Equalising reservoir, hydraulic oil (power steering) |
Type | Equalising reservoir, hydraulic oil (power steering) |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.512 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
External Thread Size | M10 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (38005)
- 3x Febi Bolt, control arm (27075)
- 3x Febi Nut (18551)
Important compatibility info
Weight | 0.303 kg |
Material | Rubber/Metal |
Outer diameter | 77 mm |
Inner diameter | 17.5 mm |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 15 mm |
Inner diameter | 8 mm |
Cooling Hose | from thermostat to expansion tank |
Type | Radiator Hose |
Function | Radiator Hose |
Weight | 0.076 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.026 kg |
Material | Aluminium, ACM (Polyacrylate) |
Type | Gasket, timing case cover |
Function | Gasket, timing case cover |
for OE number | 1 110 470 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 243 mm |
Material | Steel |
Spanner Size | 19 |
Rod/Strut | Coupling Rod |
Colour | Black |
Thread Length | 35.5 mm. 23.3 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.47 kg |
Surface | Painted |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M12 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Quality/ Grade | 8 |
Height | 17 mm |
Outer diameter | 132 mm |
Weight | 0.44 kg |
Internal Thread Size | M100 x 1,5 |
Function | Nut, kingpin |
Thread Type | with right-hand thread |
Surface | Phosphatized |
Material | Steel |
Type | Nut, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023