Important compatibility info
Material | Plastic |
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Function | Stop Light Switch |
Weight | 0.027 kg |
Housing Colour | black |
Type | Stop Light Switch |
Replaces | 23618 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.43 kg |
Placement on Vehicle | Rear Axle, Wheel Side, transmission sided |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 100 mm |
Inner diameter 1 | 21 mm |
Material | Rubber |
Length | 96 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03362)
- 1x Febi Clamping Clip (38758)
- 6x Febi Bolt, drive shaft flange (03004)
- 1x Febi Spring Washer (07253)
- 1x Febi Circlip (03335)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Material | Plastic, PA (polyamide) |
Function | Guide, timing chain |
Friction Lining Material | Plastic |
Placement on Vehicle | Left |
Weight | 0.118 kg |
Type | Guide, timing chain |
Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cooling Hose | from engine to engine cooler |
Function | Radiator Hose |
Weight | 0.28 kg |
Placement on Vehicle | Lower Right |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Function | Gasket, cylinder head cover |
Weight | 0.070 kg |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 0.312 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Additional Information 2 | with ball bearing |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
- 1x Febi Suspension Strut Support Mount (47358)
Important compatibility info
Weight | 0.259 kg |
Function | Hydraulic Filter, automatic transmission |
Height | 73 mm |
Type | Hydraulic Filter, automatic transmission |
Width | 126 mm |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.13 kg |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Number of Ribs | 6 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1237 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 98 mm |
Inner diameter | 65 mm |
Weight | 0660.0 kg |
Internal Thread Size | M16 x 1,5 |
Function | Coolant Filter |
Height | 142 mm |
Type | Coolant Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.86 kg |
Length | 230 mm |
Outer diameter | 8.5 mm |
Inner diameter | 3.2 mm |
Pressure | 362 bar |
Function | Hose Line, driver cab tilting device |
External Thread Size | M14 x 1,5 |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 265 mm |
Height | 30 mm |
Width | 195 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Weight | 0.26 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Resistor, interior blower |
for OE number | 1267.E3 |
Type | Resistor, interior blower |
Weight | 0.053 kg |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | ACM (Polyacrylate) |
Weight | 0.037 kg |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Activated Carbon Filter |
Width | 207 mm |
Function | Filter, cabin air |
Length | 276 mm |
Height | 27 mm |
Type | Filter, cabin air |
Weight | 0.200 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Spanner Size | 13, 32 |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Weight | 0.56 kg |
Length | 316 mm |
External Thread Size | M12 x 1, M14 x 1,5 |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.523 kg |
Placement on Vehicle | Rear Axle Left, Lower, inner, Rear Axle Right |
Width | 64 mm |
Material | Rubber/Metal |
Outer diameter | 70 mm |
Inner diameter | 16 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Outer diameter | 61.8 mm |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Thickness | 62 mm |
Inner diameter | 10 mm |
Weight | 0.188 kg |
Material | Rubber/Metal |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Length | 25.5 mm |
Function | Link/Coupling Rod, stabiliser bar |
Thickness | 65 mm |
Outer diameter | 10 mm |
Material | Steel |
Length | 320 mm |
Weight | 0.368 kg |
External Thread Size | M10 x 1,5 |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.020 kg |
Function | Attachment Parts Set, thermostat housing |
Type | Attachment Parts Set, thermostat housing |
Additional Information 2 | with seal ring, with screw set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, water pump breather (30073)
- 2x Febi Seal Ring (30074)
Important compatibility info
Function | V-Ribbed Belt |
Number of Ribs | 7 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 945 mm |
Weight | 0.101 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.512 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
External Thread Size | M10 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (38005)
- 3x Febi Bolt, control arm (27075)
- 3x Febi Nut (18551)
Important compatibility info
Weight | 0.031 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 225 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.177 kg |
Additional Information 2 | with cap |
Material | Plastic |
Function | Equalising reservoir, hydraulic oil (power steering) |
Type | Equalising reservoir, hydraulic oil (power steering) |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.303 kg |
Material | Rubber/Metal |
Outer diameter | 77 mm |
Inner diameter | 17.5 mm |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.160 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 80 mm |
Material | Rubber/Metal |
Rod/Strut | Coupling Rod |
Inner diameter 1 | 10 mm |
Inner diameter 2 | 12 mm |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 15 mm |
Inner diameter | 8 mm |
Cooling Hose | from thermostat to expansion tank |
Type | Radiator Hose |
Function | Radiator Hose |
Weight | 0.076 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Steel |
Spanner Size | 14, 17 |
Rod/Strut | Coupling Rod |
Colour | Silver |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Weight | 0.21 kg |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with nut, with washers |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 243 mm |
Material | Steel |
Spanner Size | 19 |
Rod/Strut | Coupling Rod |
Colour | Black |
Thread Length | 35.5 mm. 23.3 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.47 kg |
Surface | Painted |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M12 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.583 kg |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 310 mm |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.026 kg |
Material | Aluminium, ACM (Polyacrylate) |
Type | Gasket, timing case cover |
Function | Gasket, timing case cover |
for OE number | 1 110 470 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Quality/ Grade | 8 |
Height | 17 mm |
Outer diameter | 132 mm |
Weight | 0.44 kg |
Internal Thread Size | M100 x 1,5 |
Function | Nut, kingpin |
Thread Type | with right-hand thread |
Surface | Phosphatized |
Material | Steel |
Type | Nut, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, stabiliser bar |
Material | Rubber |
Inner diameter | 38 mm |
Weight | 0.07 kg |
Length | 69 mm |
Thickness | 41 mm |
Width | 69 mm |
Placement on Vehicle | Front Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 175 mm |
Material | Thermoplastic polyester elastomer |
Additional Information 2 | with clamps |
Inner diameter 1 | 13 mm |
Inner diameter 2 | 44 mm |
Weight | 0.077 kg |
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 229 mm |
Filter type | Filter Insert |
Weight | 0.486 kg |
Function | Air Filter |
Length | 283 mm |
Type | Air Filter |
Additional Information 2 | with pre-filter |
Height | 55 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 46 mm |
Function | Sealing Cap, tank unit (Urea injection) |
Extra Description | febi Plus |
Type | Sealing Cap, tank unit (Urea injection) |
Weight | 0.045 kg |
Material | Plastic |
Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 405 mm |
Height | 32 mm |
Width | 163 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Weight | 0.27 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.600 kg |
Placement on Vehicle | Lower Front Axle, Rear |
Outer diameter | 55.5 mm |
Thickness | 79 mm |
Inner diameter | 28 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.015 kg |
Type | Cylinder head hood seal, air compressor |
Function | Cylinder head hood seal, air compressor |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Placement on Vehicle | Rear Axle |
Weight | 0.033 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.020 kg |
Thickness | 0.8 mm |
Function | Gasket, oil filter housing |
Type | Gasket, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamps |
Weight | 0.083 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Thermoplast |
Function | Bellow Kit, steering |
Inner diameter 2 | 66 mm |
Length | 195 mm |
Type | Bellow Kit, steering |
Inner diameter 1 | 16 mm |
Replaces | 40057 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (26350)
- 1x Febi Gasket, steering gear (26349)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (38764)
Important compatibility info
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 240 mm |
Weight | 0.48 kg |
Function | Inner Tie Rod |
Extra Description | ProKit |
External Thread Size | M14 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.026 kg |
Diameter | 12.8 mm |
Function | Oil Dipstick |
Length from grip collar to max. marking | 541 mm |
Length from grip collar to min. marking | 561 mm |
Extra Description | febi Plus |
Colour | Red |
Type | Oil Dipstick |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Placement on Vehicle | Rear |
Material | Plastic, Rubber |
Colour | Black |
Weight | 0.043 kg |
Type | Seal Cap, camshaft |
Function | Seal Cap, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bushing, axle beam |
Inner diameter | 12.2 mm |
Colour | Yellow |
Bearing/Mounting Type | Rubber-Metal Mount |
Outer diameter | 72 mm. 82.5 mm |
Material | Rubber/Metal |
Length | 82.5 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.29 kg |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.043 kg |
Type | Sealing Set, air compressor |
Function | Sealing Set, air compressor |
for OE number | 51.54114.6081 S4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.108 kg |
Function | Water Separator, fuel system |
Type | Water Separator, fuel system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 19336 |
Weight | 0.341 kg |
Placement on Vehicle | Front Axle Right |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M12 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.341 kg |
Paired article numbers | 19342 |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 102 mm |
Thickness | 74 mm |
Spanner Size | 22 |
Function | Tie Rod End |
Extra Description | ProKit |
Internal Thread Size | M12 x 1,5 |
External Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023